My MB keeps restarting after changing Vcore in BIOS, is that normal?

I am using 965P-DS3 and Intel E2140.

Problem is i try to OC the proc........i could OC the proc if i do not touch the Vcore.
Able to do 390Mhz.................not stable therefore i try to pump in more voltage and the things just keep restarting.
But if i wanted to set the Vcore even to the proc stock Vcore stock (default value is written "Normal"----to--->1.325V) in the bios the mobo just keep restating.

Not sure what is the problem.
I cant even touch the Vcore at all.

maybe your FSB too high & the Vcore isn't enaugh fot the setting. try to up the FSB value by step. first reset your CMOS (i think you know how to reset it )

by default vcore in the bios is what value? have you try to flash the bios? also have you try to ask from previous owner if you bought in garage sales.

Even at 200Mhz i try to set the vcore to 1.325V or 1.35V also the same thing happen.


The default is 1.325V. Flash to latest version F12 even try F13X still the same.

This post has been edited by vascjw: Jun 16 2008, 08:44 PM

1. have you reset the bios ??, or unplugged the CMOS battery for any second, then plug in back ...
2. disable all your cpu hardware then assemble it again

This might be more appropriate to post your question :-
http://forum.lowyat.net/OverclockersUnited

This post has been edited by WebWalker: Jun 16 2008, 09:16 PM

Alright then................I closed this thread and open it in OC united.
Please refer to the given link.
http://forum.lowyat.net/index.php?showtopic=720895