Outline ·
[ Standard ] ·
Linear+
>>>Proton Waja Club V3<<<, Home for Waja owners Lowyat.net
|
rich79ers
|
Jun 7 2008, 10:21 AM
|
New Member
|
hi guys, new to this thread with a waja i bought in 2003.
the car is vibrating badly at idle time and low speed driving. is that a engine mount problem?
another this is my right side main light is always blown. anyone knows what is the best way to fix that?
cheers!!
This post has been edited by rich79ers: Jun 7 2008, 10:24 AM
|
|
|
|
|
|
lilmonster
|
Jun 7 2008, 11:40 AM
|
Getting Started

|
QUOTE(rich79ers @ Jun 7 2008, 10:21 AM) hi guys, new to this thread with a waja i bought in 2003. the car is vibrating badly at idle time and low speed driving. is that a engine mount problem? another this is my right side main light is always blown. anyone knows what is the best way to fix that? cheers!! yup..its the mounting problem..in order to check which mounting has kong, start ur car, open the bonnet, step on to your brakes, put on to first gear and reverse gear and observe those mounting..see which one vibrates more..I would recommend the use of those local made ones as it is hard rubber..ori Proton got oil in between like a baloon..therefore it spoils easily..hard rubber give better response too..For your headlamp, try dumping a voltage stabilizer and observe see got changes or not
|
|
|
|
|
|
MOMOchacha
|
Jun 7 2008, 11:55 AM
|
|
QUOTE(lilmonster @ Jun 7 2008, 11:40 AM) yup..its the mounting problem..in order to check which mounting has kong, start ur car, open the bonnet, step on to your brakes, put on to first gear and reverse gear and observe those mounting..see which one vibrates more..I would recommend the use of those local made ones as it is hard rubber..ori Proton got oil in between like a baloon..therefore it spoils easily..hard rubber give better response too..For your headlamp, try dumping a voltage stabilizer and observe see got changes or not 100% sure no problem.i also hv done it  Added on June 7, 2008, 11:56 amlilmonster may i know wat happening with the TI? i hv try log in this few week.but there is some error. wat happening? This post has been edited by MOMOchacha: Jun 7 2008, 11:56 AM
|
|
|
|
|
|
TSjlce10
|
Jun 7 2008, 12:16 PM
|
|
QUOTE(MOMOchacha @ Jun 6 2008, 05:32 PM) remove sub woofer got any helping?  Added on June 6, 2008, 5:33 pmerm..i think a little bit higher than mine. last time the petrol price still in rm1.92 my rike RM88 can go up to 520km  i duno my meter got problem or not, i mean the record milage 1, cuz RM80++ can last for 3 weeks, everyday also drive car to college, saturday and sunday go down town... but i also pump about RM88-89 350km++ very high lor compair to yours can go 520km...
|
|
|
|
|
|
Advanz
|
Jun 7 2008, 12:35 PM
|
|
hello guys... I've a question here.. I've just changed my car battery on my own and something happened.. The timing was low.. Even when the car is idle, the rpm should be above 500 and the rpm was not stable and when it reach below 500..the car start jerking and then mati engine... When i'm driving and wanna slow down my car near traffic light or at junction, when the rpm goes down, my car will mati engine too.. And another question is, how to set back the time since the battery has been changed?
|
|
|
|
|
|
ron4
|
Jun 7 2008, 12:49 PM
|
|
QUOTE(sphiroth @ Jun 5 2008, 01:29 PM) Standard alarm is one-way, you can only send signal/info to your car (lock/unlock etc). 2-way alarm allows you to send and also receive signal from your car. Let say someone open your car door, the car itself will send signal to your transponder to alert you instead of just sounding the siren.  Somebody told me that the most secure locking system is Disklock use to lock the wheel steering, because it cover all the steering wheel and it is expensive too, around RM499. And somemore they told me that this lock is far more better than the autolock pro from smartshop. Any comment on this guys?  And also, is it will fit with waja steering wheel and where can i get this lock in KL area?, Thanks in advance This post has been edited by ron4: Jun 7 2008, 12:52 PM
|
|
|
|
|
|
rich79ers
|
Jun 7 2008, 12:53 PM
|
New Member
|
wow, lock the whole steering  im concern with security too but i dont think ill ever go to that extend.
|
|
|
|
|
|
ron4
|
Jun 7 2008, 01:32 PM
|
|
QUOTE(rich79ers @ Jun 7 2008, 12:53 PM) wow, lock the whole steering  im concern with security too but i dont think ill ever go to that extend. It is my concern because the surrounding of my area before, got a lot of motorcycle has been stolen, car never heard yet. But i think prevention is better aa before something bad happen
|
|
|
|
|
|
thefryingfox
|
Jun 7 2008, 03:20 PM
|
|
QUOTE(Advanz @ Jun 7 2008, 12:35 PM) hello guys... I've a question here.. I've just changed my car battery on my own and something happened.. The timing was low.. Even when the car is idle, the rpm should be above 500 and the rpm was not stable and when it reach below 500..the car start jerking and then mati engine... When i'm driving and wanna slow down my car near traffic light or at junction, when the rpm goes down, my car will mati engine too.. And another question is, how to set back the time since the battery has been changed? I had that problem...while coming down from genting  few days before i change battery...then suddenly when i went up genting was okay. When i was on the way down, the car rpm goes to below 500 and dies. It happen a few time. I opened the bonnet, took a plier and twist the battery connector screw really hard until it got a firm grip then only car was okay. Had to rev it higher abit for about 4-5 mins then the ecu was fine. Try that, or maybe your altenator kong already and yes, how do i change the timing back? dont tell me must go back proton service center?
|
|
|
|
|
|
MOMOchacha
|
Jun 7 2008, 05:37 PM
|
|
hahaha..many plp until now still dunno set back the time ya. ok..your must click the total millage. then u whole the button..i think 10sec like that. after that the clock will blinking for set hour. for set minute wait u finish set the hour then stop for 10sec too then it will auto change to minute.after that u cont set the hour than minute as u like Added on June 7, 2008, 5:38 pmQUOTE(jlce10 @ Jun 7 2008, 12:16 PM) i duno my meter got problem or not, i mean the record milage 1, cuz RM80++ can last for 3 weeks, everyday also drive car to college, saturday and sunday go down town... but i also pump about RM88-89 350km++ very high lor compair to yours can go 520km... how are meter wil hv problem?it is running by electric le not those old type button type like wira This post has been edited by MOMOchacha: Jun 7 2008, 05:38 PM
|
|
|
|
|
|
TSjlce10
|
Jun 7 2008, 05:50 PM
|
|
QUOTE(MOMOchacha @ Jun 7 2008, 05:37 PM) hahaha..many plp until now still dunno set back the time ya. ok..your must click the total millage. then u whole the button..i think 10sec like that. after that the clock will blinking for set hour. for set minute wait u finish set the hour then stop for 10sec too then it will auto change to minute.after that u cont set the hour than minute as u like Added on June 7, 2008, 5:38 pmhow are meter wil hv problem?it is running by electric le not those old type button type like wira  ya, i guess it does not have a problem d like this, its run by electric... but RM88 only goes about 350+ for the petrol sign to light up, but i feel after awhile the petrol sign no lights d, how come like this?? waja's petrol indicator not accurate 1...
|
|
|
|
|
|
MOMOchacha
|
Jun 7 2008, 06:00 PM
|
|
QUOTE(jlce10 @ Jun 7 2008, 05:50 PM) ya, i guess it does not have a problem d like this, its run by electric... but RM88 only goes about 350+ for the petrol sign to light up, but i feel after awhile the petrol sign no lights d, how come like this?? waja's petrol indicator not accurate 1... not only waja la.. i hv find out with my fren too.. v realliza all Malaysia made car d petrol indicator is not accurate at all. that meaning ur car nv MOD anything at all? nv add any for save fuel?
|
|
|
|
|
|
sphiroth
|
Jun 7 2008, 06:05 PM
|
|
QUOTE(MOMOchacha @ Jun 7 2008, 05:37 PM) hahaha..many plp until now still dunno set back the time ya. ok..your must click the total millage. then u whole the button..i think 10sec like that. after that the clock will blinking for set hour. for set minute wait u finish set the hour then stop for 10sec too then it will auto change to minute.after that u cont set the hour than minute as u like Added on June 7, 2008, 5:38 pmhow are meter wil hv problem?it is running by electric le not those old type button type like wira  Even it is run by electrics, its still depend on signal coming from gearbox and flywheel to calculate the distance. Changing rims can also affect distance measurement (but not much). QUOTE(jlce10 @ Jun 7 2008, 05:50 PM) ya, i guess it does not have a problem d like this, its run by electric... but RM88 only goes about 350+ for the petrol sign to light up, but i feel after awhile the petrol sign no lights d, how come like this?? waja's petrol indicator not accurate 1... Its due to design of the fuel tank, maybe the 'float' got stuck inside.
|
|
|
|
|
|
TSjlce10
|
Jun 7 2008, 06:09 PM
|
|
QUOTE(MOMOchacha @ Jun 7 2008, 06:00 PM) not only waja la.. i hv find out with my fren too.. v realliza all Malaysia made car d petrol indicator is not accurate at all. that meaning ur car nv MOD anything at all? nv add any for save fuel? ya, i never mod anything and also din add save fuel... Added on June 7, 2008, 6:10 pmQUOTE(sphiroth @ Jun 7 2008, 06:05 PM) Even it is run by electrics, its still depend on signal coming from gearbox and flywheel to calculate the distance. Changing rims can also affect distance measurement (but not much). Its due to design of the fuel tank, maybe the 'float' got stuck inside.  owh i see, anyway i feel that my cars gear will drag when its on 1st gear after that only smooth, this happens during cold times like early in the morning or raining days... This post has been edited by jlce10: Jun 7 2008, 06:10 PM
|
|
|
|
|
|
MOMOchacha
|
Jun 7 2008, 06:20 PM
|
|
QUOTE(jlce10 @ Jun 7 2008, 06:09 PM) owh i see, anyway i feel that my cars gear will drag when its on 1st gear after that only smooth, this happens during cold times like early in the morning or raining days... u are same with me.when cold time the gear changing no smooth at all. change fly wheel really got help? wat is your ride age?last time when i was do aligment the guy found out the petrol filter beside that hose already leaking.so that time i also hv lost some petrol cos it is leaking and also very danger on the road. cos some of the smoker like to smoke when driving.besides that, when the finish smoke then straight away drow it tothe road.u know that is very danger..i hate those fxxxer smoker This post has been edited by MOMOchacha: Jun 7 2008, 06:21 PM
|
|
|
|
|
|
Advanz
|
Jun 7 2008, 06:26 PM
|
|
QUOTE(thefryingfox @ Jun 7 2008, 03:20 PM) I had that problem...while coming down from genting  few days before i change battery...then suddenly when i went up genting was okay. When i was on the way down, the car rpm goes to below 500 and dies. It happen a few time. I opened the bonnet, took a plier and twist the battery connector screw really hard until it got a firm grip then only car was okay. Had to rev it higher abit for about 4-5 mins then the ecu was fine. Try that, or maybe your altenator kong already and yes, how do i change the timing back? dont tell me must go back proton service center? thx alot for the info...i'll try the method u mentioned when i have free time.. QUOTE(MOMOchacha @ Jun 7 2008, 05:37 PM) hahaha..many plp until now still dunno set back the time ya. ok..your must click the total millage. then u whole the button..i think 10sec like that. after that the clock will blinking for set hour. for set minute wait u finish set the hour then stop for 10sec too then it will auto change to minute.after that u cont set the hour than minute as u like Added on June 7, 2008, 5:38 pmhow are meter wil hv problem?it is running by electric le not those old type button type like wira  thanks for the info....
|
|
|
|
|
|
TSjlce10
|
Jun 7 2008, 06:39 PM
|
|
QUOTE(MOMOchacha @ Jun 7 2008, 06:20 PM) u are same with me.when cold time the gear changing no smooth at all. change fly wheel really got help? wat is your ride age?last time when i was do aligment the guy found out the petrol filter beside that hose already leaking.so that time i also hv lost some petrol cos it is leaking and also very danger on the road. cos some of the smoker like to smoke when driving.besides that, when the finish smoke then straight away drow it tothe road.u know that is very danger..i hate those fxxxer smoker  my car's age is about 4 years +... i always go check my car at mechanic's place 1, any leakage and so on... yala, thouse smoker
|
|
|
|
|
|
kimiloh
|
Jun 8 2008, 12:30 AM
|
|
QUOTE(rich79ers @ Jun 7 2008, 10:21 AM) hi guys, new to this thread with a waja i bought in 2003. the car is vibrating badly at idle time and low speed driving. is that a engine mount problem? another this is my right side main light is always blown. anyone knows what is the best way to fix that? cheers!! exactly, it is the engine mounting problem, mine just changed (3 out f 4) and the problem solved. Mine also not changed with ori.
|
|
|
|
|
|
lilmonster
|
Jun 8 2008, 04:08 AM
|
Getting Started

|
QUOTE(MOMOchacha @ Jun 7 2008, 11:55 AM) 100% sure no problem.i also hv done it  Added on June 7, 2008, 11:56 amlilmonster may i know wat happening with the TI? i hv try log in this few week.but there is some error. wat happening? its the problem with the hosting..will be finding a new company to host that website..current one isn't doing their job well Added on June 8, 2008, 4:10 amQUOTE(Advanz @ Jun 7 2008, 12:35 PM) hello guys... I've a question here.. I've just changed my car battery on my own and something happened.. The timing was low.. Even when the car is idle, the rpm should be above 500 and the rpm was not stable and when it reach below 500..the car start jerking and then mati engine... When i'm driving and wanna slow down my car near traffic light or at junction, when the rpm goes down, my car will mati engine too.. And another question is, how to set back the time since the battery has been changed? hmm..sound like ur car setting has run..usually when changing a waja battery, need to start that car first and leave it running only change..if not setting will run..Just send to some service center which has the computer to tune it back..thats all This post has been edited by lilmonster: Jun 8 2008, 04:10 AM
|
|
|
|
|
|
miragers
|
Jun 8 2008, 04:14 AM
|
|
yeah true true..
lil monster, u not sleepy ar ? go sleep la
|
|
|
|
|