Hi..i a newbie to ICE..lately i brought a Kenwood MP5039..and i thinking to have a Amp and a 12" sub at the back of my car..any recommend coz my budjet around 800-1k..And i need the wiring to done too..

U mean u wan the amp + sub + wiring & installation under 1k? That is quite tough...

hmmm..actually i found 1..it is a BM 12"inch sub for Rm350 ..and a normal amp for Rm500..but i dunno how much is the wiring cost for a wira sedan?any idea of this?

maybe rm300 or so.

wiring can start from RM150 up to RM500 or more... depending on the wire size and the length...

BLub...Any recommend for shop around desa petaling?or i should put the amp without the sub..coz i have a stallion 6x9 replace rear default speaker..

if u have 4 ch amp, juz use 2 ch for front and bridge the other 2 ch for the sub. Then use ur HU to power the rear will be enuf.

if u have the 6x9 i strongly suggest removing them if u wanna install a sub. they somehow kill the bass form the sub making it either muddy like hell or just non-existent... ive seen and heard of both cases.

as for ckmoy007's suggestion, yeah thats the easiest and mebbe cheapest way to do it. but u have to ensure the amp is getting enough power, otherwise itll cut off during hard bass sections (like my old setup) or from overheating (like my colleague's current setup) although my colleague sort of solved it by putting 8x80mm fans on the amp

as for BM woofer... i used BM once. didnt even last a month pecah already. and i didnt really like the sound. id recommend American Autocraft, slightly more expensive but sounds better and last longer too (although mine burned due to amp mismatching).

Hmm..u mean i just put the sub at my back without the 6x9?then what speaker i should put for my mid bass?

put 2-way component speaker at the front and can leave the back empty (aka only the woofer)

can tumpang thead ? guys any recomemend amp for my comp? for crossfire sr6 ?



This post has been edited by ah_fong: May 9 2008, 12:15 AM

wat is the spec for ur crossfire, sorry but i haven't heard that brand, u have to choose ur amp according to the specs of ur speakers or not it will be underpowered or blow.

my comp spec
maximum power handling 130watts
nominal power handling 65 watts
frequency responce 50hz- 20khz
sensitivity 91 DB

here are the website http://www.crossfirecaraudio.com

Try Blaupunkt THA 480 ( 80W rms x 4 ), or some forumer is selling some soundstream or alpine amps oso can... basically u juz need around 50W - 75W rms per channel. Try doing some research and search around for ur own budget.

If your car is a Wira, than you'll need a pair of 12" for it to 'happen' with front 6"/tweeter component incl a good 'cetak-rompak' 75W X 4 transistor-amp from a old-branded design. $1,000 budget should be enough.

RM1k is so small amount to do everything le.. i think make it RM1.5k - RM2k

for sub get monoblock.
ur spkr get component spkr + 4channel amp.
tune up to ur spec.

RM1.5k-RM2k

or
u can use a 4 channel.
2 channel for spkr
bridge 2 channel for sub.
but the sub might not be able to power up during hi-bass.
when you on loud that
time, the bass and sound will change. This is because the power is
separated balance