» Click to show Spoiler - click again to hide... «
QUOTE(wotiyo @ Apr 29 2008, 11:47 PM)
This custom cable is dedicatedly built to provide a significant improvement over the stock cables.
The raw cable and connector are carefully selected based on the design intent of the product. The material being used is to ensure that the specifications of the application are met.
I have adopted high quality cooper cable which is Canare Studio cable that measured to provide the best interference reduction performance as well as audio signal transmission performance. The cable will be sleeved with high quality heatstrink and thermo resistant material and it is very flexible. The structure of Canare Cable is to produce almost non-existent noise when signal transferring.
High quality silver solder (WBT-0820, Leaded Silver Solder, 4% Ag) is used throughout the production to guarantee there is no weak link in between.
The cable will be produce in very careful manner to avoid any mistake and problem, I will fully test my final product before send it to my customer.
The connector being used is high quality and durable. Normally Neutrik connectors especially 3.5mm jack is small and lightweight so it is more suitable for portable while Canare Connector is heavier and bigger if compare to Neutrik. But if u planning to use the cable in long term, I suggest u use Canare connector due to its performance is better.
The cable can be:
1.mini>mini
2.mini>2xRCA
3.RCA>RCA
4.Coaxial cable
5.Others like mono cable, guitar cable adapter and etc.
Pls don’t hesitate drop me a pm or a reply if u have and doubt of it….
Thanks….
Info of Canare Cable (Source)
L-4E6S
The premier Star Quad cable for all handheld microphone applications. Flexible, satin smooth to the touch and extra strong, this standard diameter, 21 AWG cable fits perfectly in all XLR-type audio connectors. Forty separate strands in each conductor eliminate breakage due to flexing. Available in 10 beautiful matte finish color jackets.
L-2T2S
Our standard diameter 2-conductor microphone cable for general purpose audio applications. The high density braided copper shield and two inner conductors (composed of 60 thin strands of copper wire), allow for maximum flexibility and reduced handling noise. A special compound PVC outer jacket resists cracking and tears even in sub-zero environments.
L-2B2AT
Canare's thinnest profile audio hookup wire. Amazingly flexible, with 100% foil shield, drain wire and PVC jacket that strips easily for rapid assembly. Suitable for large cable harness bundles, mixing consoles, tape machines and inner-rack wiring.
LV-61S
Canare's No.1 Selling Coax. A lightweight, very flexible RG59B/U equivalent that is perfect for all video facility equipment interfacing, ENG/OB work and video patch cord assemblies. Our smooth non-glare finish PVC jackets are available in 10 distinctive colors (including Chroma-Key Blue!) and will stay flexible even in sub-zero weather!
According to Clear Cables,they searched for the perfect analog interconnect cable, and none was better than the Canare Star Quad Model L-4E6S cable. Star Quad refers to the 4-conductor style construction that minimizes the loop area between twists of the conductors. According to Canare, this "double balanced" pairing reduces susceptibility to electromagnetically induced noise.
L-4E6S uses four 24 gauge annealed copper conductors, that when combined and soldered into the Canare F-09 RCA connectors, result in a pair of 21 Gauge balanced conductors. We ground the 95% braided copper shield to the "transmitting" end of the cable, for superior noise rejection. Other manufacturers mistakenly ground the shield to both connectors, resulting in two ground paths for the cable, and therefore a "ground loop" which causes noise.
PRICE(all price is in 1 meter)
Canare Connector Details
canare F-10

canare F-12

Neutrik NYS series 3.5mm minijack

Neutrik NYS series RCA gold connector

Customer feedback
The raw cable and connector are carefully selected based on the design intent of the product. The material being used is to ensure that the specifications of the application are met.
I have adopted high quality cooper cable which is Canare Studio cable that measured to provide the best interference reduction performance as well as audio signal transmission performance. The cable will be sleeved with high quality heatstrink and thermo resistant material and it is very flexible. The structure of Canare Cable is to produce almost non-existent noise when signal transferring.
High quality silver solder (WBT-0820, Leaded Silver Solder, 4% Ag) is used throughout the production to guarantee there is no weak link in between.
The cable will be produce in very careful manner to avoid any mistake and problem, I will fully test my final product before send it to my customer.
The connector being used is high quality and durable. Normally Neutrik connectors especially 3.5mm jack is small and lightweight so it is more suitable for portable while Canare Connector is heavier and bigger if compare to Neutrik. But if u planning to use the cable in long term, I suggest u use Canare connector due to its performance is better.
The cable can be:
1.mini>mini
2.mini>2xRCA
3.RCA>RCA
4.Coaxial cable
5.Others like mono cable, guitar cable adapter and etc.
Pls don’t hesitate drop me a pm or a reply if u have and doubt of it….
Thanks….
Info of Canare Cable (Source)
L-4E6S
The premier Star Quad cable for all handheld microphone applications. Flexible, satin smooth to the touch and extra strong, this standard diameter, 21 AWG cable fits perfectly in all XLR-type audio connectors. Forty separate strands in each conductor eliminate breakage due to flexing. Available in 10 beautiful matte finish color jackets.
L-2T2S
Our standard diameter 2-conductor microphone cable for general purpose audio applications. The high density braided copper shield and two inner conductors (composed of 60 thin strands of copper wire), allow for maximum flexibility and reduced handling noise. A special compound PVC outer jacket resists cracking and tears even in sub-zero environments.
L-2B2AT
Canare's thinnest profile audio hookup wire. Amazingly flexible, with 100% foil shield, drain wire and PVC jacket that strips easily for rapid assembly. Suitable for large cable harness bundles, mixing consoles, tape machines and inner-rack wiring.
LV-61S
Canare's No.1 Selling Coax. A lightweight, very flexible RG59B/U equivalent that is perfect for all video facility equipment interfacing, ENG/OB work and video patch cord assemblies. Our smooth non-glare finish PVC jackets are available in 10 distinctive colors (including Chroma-Key Blue!) and will stay flexible even in sub-zero weather!
According to Clear Cables,they searched for the perfect analog interconnect cable, and none was better than the Canare Star Quad Model L-4E6S cable. Star Quad refers to the 4-conductor style construction that minimizes the loop area between twists of the conductors. According to Canare, this "double balanced" pairing reduces susceptibility to electromagnetically induced noise.
L-4E6S uses four 24 gauge annealed copper conductors, that when combined and soldered into the Canare F-09 RCA connectors, result in a pair of 21 Gauge balanced conductors. We ground the 95% braided copper shield to the "transmitting" end of the cable, for superior noise rejection. Other manufacturers mistakenly ground the shield to both connectors, resulting in two ground paths for the cable, and therefore a "ground loop" which causes noise.
PRICE(all price is in 1 meter)
» Click to show Spoiler - click again to hide... «
1.mini>mini
RM55 using neutrik NYS series minijack and canare 4E6S cable
RM90 using canare F-12 connector and canare canare 4E6S cable
2.mini>2RCA
RM60 using neutrik NYS series minijack and RCA gold connector with canare 4E6S cable
RM110 using 2Xcanare F-10 and F12 connector with canare 4E6S cable
3.RCA>RCA(in pair)
RM80 using neutrik NYS series RCA gold connector with canare 2T2S cable
RM140 using canare F-10 connector with canare 2T2S cable
4.Coaxial cable
RM80 using canare 75ohm coaxial cable and F-10 connector
RM50 using canare 75ohm coaxial cable and neutrik NYS series RCA gold connector
5.Others cable
pm me and ask the price...
Please kindly add RM10 for postage...
RM55 using neutrik NYS series minijack and canare 4E6S cable
RM90 using canare F-12 connector and canare canare 4E6S cable
2.mini>2RCA
RM60 using neutrik NYS series minijack and RCA gold connector with canare 4E6S cable
RM110 using 2Xcanare F-10 and F12 connector with canare 4E6S cable
3.RCA>RCA(in pair)
RM80 using neutrik NYS series RCA gold connector with canare 2T2S cable
RM140 using canare F-10 connector with canare 2T2S cable
4.Coaxial cable
RM80 using canare 75ohm coaxial cable and F-10 connector
RM50 using canare 75ohm coaxial cable and neutrik NYS series RCA gold connector
5.Others cable
pm me and ask the price...
Please kindly add RM10 for postage...
Canare Connector Details
canare F-10

canare F-12

Neutrik NYS series 3.5mm minijack

Neutrik NYS series RCA gold connector

Customer feedback
» Click to show Spoiler - click again to hide... «
can you rewire my old 2.1 system. PM reply please thanks.
May 15 2012, 10:34 AM

Quote
0.0158sec
0.61
7 queries
GZIP Disabled