I did asked her 2 days ago and she said its Telstra.

Still surveying the price, should join the club very soon

Should be quite straight forward.

I don't expect you need to compile all the code yourself and install it

shinzan, worth it if you need the feature of it.
Dun buy for the sake of other have it, you need it too

I'm getting a unit next week, will join the group soon.

Getting the AP unit

oh ya carbon14, TT in Ipoh after I get the phone
and who you bought the martin field from?
daijoubu doesn't seem active nowadays

if you always drop your phone, rubber housing will be the best bet.
Rubber absorbs some force throughout the process

I'm officially a P1i user now.
Charging the phone now

I played with the phone for a while.....

It comes with mandarin input....I not able to change it to english input just yet.......

Now the phone in charging mode without sim card, will try it again later.

nohal, u already using the latest R9K009

You sure singapore latin without chinese input?

When I first bought my phone, it comes with singapore firmware with Singapore Latin CDA (R5A), it does come with chinese input.

Problem solved.

This post has been edited by allenultra: May 13 2008, 09:29 PM

After 2 days of P1i usage.

- Flashed to latest firmware, Singapore firmware. Just nice for me as I need the chinese input. SMS now comes with the virtual keyboard, not available with the default firmware (can't remember the version name) but the virtual keyboard doesn't appear in Opera Mobile/Mini browser though.

- Did walkmanv3 hack, followed carbon14 guide and it was successful at first attempt. There isn't volume control in walkmanv3 AFAIK, if u know how to alter volume in walkmanv3, please enlighten me.

- SwissManager is a nice application but I don't know how to set it "autostart", I remember I read at p1iblog.com that this function disable in UIQ 3.0? Correct me if I'm wrong.

- Green Tint issue was horrible on the default firmware(was it R9H007? can't really remember), it seems better now with the latest firmware. Will snap a photo of white paper and upload here later.

- Nokia N series browser is clearly better than Opera Mobile/Mini browser after tried my bro's N82.

- The loudspeaker volume is quite ok, not as loud as w800i but the volume still pretty acceptable. Just use any audio editing software and increase the amplitude of the audio files, you should get a louder playback.

- Symbian UIQ 3.0 softwares not that easy to find compared to S60 though, had hard time looking for games.

- On GSM & 3G mode, 3G signal always drop and change to GPRS mode. If I force 3G mode, its seem better, hardly drop. P1i not really a good 3G phone? or Maxis3G just sux?

That's all for now, quite a happy P1i user.

GPRS = GSM mode
3G = 3G Mode only

Or else stick with 3G and GSM mode.

Control Panel > Connections > Mobile Networks > More > GSM/3G Networks



I need comment on photos above, it seem ok for me.
Far better than old firmware, where green tint was obvious even on phone LCD.

This post has been edited by allenultra: May 14 2008, 11:25 PM

steel2k2, check it again.
its not "pc-Connect port" but instead of "application port".
Make sure you connect your phone to pc in "phone mode".

p/s : You din really follow the instruction


I have a question here which I can't solve yet. Still exploring the phone.
When sms in, no "new sms" pop out, there isn't any indication of sms just in.
I only know sms in when I checked the inbox.
Anyone care to enlighten me on this matteR?

Problem solved.



Weird method but it works.

This post has been edited by allenultra: May 15 2008, 01:44 PM

After applied all the hack, use SwissManager to copy the files into phone memory.

Its "SwissManager", use your stylus. Not your pc mouse.

No support for flash on p1i just yet.
Finger crossed, hopefully a good news from SE soon.

sprix

Control Panel > Device > Standby Application > Activity Menu or None

How to alter Activity Menu, I believe its all about the theme itself? correct me if I'm wrong.

Just wonder, have anyone with good experience with pdf+?

I tried to view some pdf files using the application, the text shown after "wrap" is very bad. Its the font size or the alignment messed up.

Maybe I should look for alternative software and give it a try.

That isn't the latest firmware.
THat's singapore firmware, you will not lose ur chinese input/display if u flash to latest firmware.

My P1i was on that firmware too when I bought it last week.
Just flash it to R9K009


carbon14, UIQ documentstogo doens't support pdf though.
I will continue my search for a better software than pdf+

This post has been edited by allenultra: May 18 2008, 05:30 PM

yes, saved into memory stick. then use swiss manager and move those files into respective folders.

It will work if you did all the steps correctly.
Only a small mistake hinder you from making it, recheck everything and try it again

I also looking for 1.24 "ahem" version.
Not able to find it just yet.
Just go over Dotsis, they should have the latest update of it