Me but wating for PSU now

hehehe..that really make sense..make me having second thought on upgrading next time...
thing really different when u have crossed the 'single and available' line...

BTW bro ah_khoo..saw sumthing change on ur siggy...

Using my KVR 667

me also...

Very weird, my 335x9 wasn't stable when playing games even if its stable at Super PI 32M I need to pump more voltage to keep it stable (1.4V), looks like I better with 320x10 (3.2GHz) 1.4V. Might be it hits the HTT wall like on my previous Windsor F2, or is there any logical explanation for this?

i don't think using SP 32MB alone is enough to ensure the clock's stability.
usually i'll do at least 2 hours CPU blend, or 8 hours straight, to make sure it's totaly stable.. then start playing games and all..

way u guys saw is about to change in few days...


playin d d board now, too much to learn in limited time... guess i gotta overclock myself ledi...

btw bro habuk, any do's & dont's for our board? am just started to warm up, need some proper guidence here...

I don't have time for that, usually games are more prone to crash than this Orthos. For me I just use Orthos for about half an hour to test the temperature. Games usually crash even faster than that

ahak ...cannot help la bro..
ur's are way advanced then mine...maybe u can are casperito..
he also have same board as u are..

mine cannot handle much htt like urs..that heat pipe really helping though..

This post has been edited by mr_habuk: May 7 2008, 11:36 PM

humm, try orthos blend for 1 hour, if succeed, then ok already.

as for me, i'll try orthos for 1 hour first (after overclock), before i play games.

i also experience crash while playing games (xxxx.exe has stop working..) due to unstable overclock.

This post has been edited by pikacu: May 7 2008, 11:56 PM

@najmods..mind to post ur problematic setting?mayb got sumthing wrong with ur ram too..coz sometimes, its the ram that gives u problem, or usually, when crash, its ur vcore not enuf

err... even im still studying the BIOS.. quite complicated actually... and with all my assignments making me even more penin...
but i think the BIOS is the same as urs la mr_habuk.. onli the PCB layouts are different... UT got the coooooooool transpiper onli... can cabut then pasang at ur mobo also.. ehehe...

and bro, wanna ask about ur chipset temp?? is it ok?? mine ysterday the chipset temp went to 50c ++.. the lowest i get is 43c...
dang ipoh is really2 hot... even with 2 table fan directing air to my mobo, the ambient temp is still hot...

start up near 40'C, full load @ 59~60'C. I've checked in XS, seems like some users are havin d same temps as well. d cpu temp reported is higher than coretemp too.

initially i thought d chipset is not makin proper contact w d heatpipe, that's why i removed it to reapply some AS on both NB & SB. end up still d same. but d temp was w/o d transpipe (watever u call it )...

This post has been edited by ah_khoo: May 8 2008, 09:55 AM

Wow...UT 790FX-M2R. Nice board you have there. :thumb:
Any special on this board?

-pWs-

I think the special is the Transpiper?

nothing special bro, i'm contented enuf if it's a dfi board.

UT VS DK:

digital pwm vs normal 4/5 phase pwm (if i'm not mistaken)
SiI3132 raid + SB600 raid vs SB600 raid
pipe cooled chipsets vs normal sinked chipsets
debug led vs none
dual lan vs single lan (if i'm not mistaken)
dang expensive vs affordable

This post has been edited by ah_khoo: May 8 2008, 10:02 AM

a native octal-core Sandtiger

Sorry for off topic though.But is this trustable?

erm ? octal core sandtiger ?
did u mean the fusion platform ?

i still got mine below 50' full load..
but naked under 2x4hp air conditioning room..
wait until i bring it home..

u forgot to mention UT sexy design..
can match up with kedah football team..

lol... i hate green + yellow combo... yellow + orange (d old skool lp nf4 series) look nicer to my eyes...

which bios u guys r usin? i'm on 4-15.