Nah,i am funding to upgrade maybe downgrade...This casing i think enough already..I also planning to mod other casing after this.

Hahaha,relax bro...the other side panel is under alterations..tgh fikir camner nak buat...blom spray lagi pon.

Give me sometimes to mod it.

Huhu,plan jer bro..

Don't give up in modding.
To mod a simple case,x pelu duit byk bro...

Thank for the wish...you can come over anytime.
This is a cap ayam case i bought for RM130 only.

Here it go :

What i use.
1- I used 14 bottles of "samurai" spray can.
2- 8 pieces of sanding papers. 2X 600 grit, 2X 800 grit, 2X 1000 grit 1X 1200 grit and a 1X 1500 grit papers.(wet and dry)
3- Tack clothes from 3M
4- Masking tapes.
5- Black and decker polishing sponge.

What i did to both panels,chassis and other parts.(preparing)
1- Sand all the entire parts of the case with all those sand papers ( took me almost 1 week)
2- Let then dry under the sun for about 1 whole day.

Painting (outside parts)
- I painted 1st layer with a Metallic Grey.This is what i did to the interior chassis.
- I sanded down the primer with wet sanding to make it more shiny and smooth.
- I applied metallic gray again for the 2nd layer.I do overall 5 layers.
- After done the metallic gray,i waited it to dry under the sun for 2-3 days.
- Wetsand with a 1500 grit papers smoothly.
- Put some pearl white to get some effects.
- Apply a clear coat to make the painting more shiny and last longer.

Painting (interior)
- Its almost the same as what i did to the outside parts,only the different is the color.

*if possible,apply some compound after 2weeks.Let the paint dry totally.
*apply some waxing / polishing after 4 weeks.


Thats i cal help you bro.

I will try to help out as possible i can bro.

Erm,tak lama lagi kot..sebab kene bli few things utk casing nih.so,tunggu bajet cukup dulu,then continue.

I bought it from lollahol.he bought it from someone else,but he didn't use it at all.

You're wellcome frend.

Hahaha,aku ni baru jer nak blaja modding...nnt nak try mod other case plak.thanx bro.

Takper bro...ni temporary casing jer...aku nak mod lagi case lain lepas nih...

AKu rasa nak jual kot...nnt la aku bukak thread...

The fins are finally done.

Its not really perfect.









This post has been edited by ocz: Jun 1 2008, 03:58 PM

Time aku cut fin tu dulu,aku pakai manual saw,sebab tu la senget sket.Takde dremel bro.

Kalo aku file byk2,lagi tak rata.

Haha,xper...tapi aku try mod other casing lepas nih better sket.

Haha,thank you for the great stuff.I got more modding stuff,just drop me a pm.

TQ bro.....

Well,i need to see 1st,i have to complete some of the incomplete parts before i can let it go.
For sure i will open a thread about this.No worry dude.

Rilex bro.Senyap means no
I am still funding now.

Selling some of my stuff and get the money to finish the casing modifications.I got some offers to sell the casing d.

Huhuhu.....no la bro...i wanna do other business. I just like to mod a case but not using it.

Not anymore since i already made up my mind.
I will continue modify this casing.

stay tuned for more updates.

Small Updates.

I did some renovations ob the 2X 80mm fans hole.I file more to make it more circle.


For the front part.I removed the 2X 80mm fans bracket and replaced it with a single 120mm fans bracket with alumunium angle.


The paint a bit scratch so i decided to repaint the whole chassis again.

There's a few pages back.

Hehe,nevermind,curi laa..
I bought if from audio shop at my place.
Normal hardware shop also can get.

Thank you friend.I will re-mod the case.

Rm 140.

To others.I have no time to do modding last few weeks because i focus more on upgrading the rig.I will continue more later on.This this time its re-mod so it maybe doesn't look like alien anymore.

Small Updates : 26/6/08.

I got a replacements casing for my previous casing.I was given by my friend.
I really upset for what i did to my 'alien' and turn out to be stupid casing.