yeap, agree with that, but so far, i still love the stock rim design, matches the car, esp when lowered
until now i cannot find replacement

the ori. 14" rims very 'soft', dent easily, better replace it~~~ haha~

i wanna get it off, but what tyre size that u guys use ?
is viva's 155/65R13 good ? or kenari/kelisa's 165/60R13 ?

is Atos's tyre lubang size same as kenari ? atos is using 175/60R13, i thought of taking that, wat say u?

yes sure can diy..

u have to dismantle front grill, bumper,fender, but before remove the fender
u have unscrew 3 bolts at the skirting first!....

if u r getting 3pts Fender Bar, 2 points got existing hole...just bolt on...
except 1point u need to make a hole aka drill.......

175......quite tight, and if your car is lowered, will makan fender. heck, my 165 makan fender under hard cornering di.

atos should be same pcd100. use back kelisa 13" size is good. viva's tyres are too narrow for my liking. like kancil narrow only

i'm using 165/55R14, the std... looking fwd to 175/50R15...

atos's pcd same as kenari, kelisa, myvi and kancil... my fren using myvi rims on atos...

dismantle front frill n bumper not a problem for me... but i never try to remove the fender before... i dont have skirting, so no problem for me

yes i'm getting 3 point fender bar... need to drill ah?! then it doesn't sounds like diy adi lo... nevermind, i wil get help from my fren thanks for the info...

totally agree with u, ady break it long time ago

that means myvi's tyre can fit in my kenari ?

165/65R13 can fit in or not ? thought of taking a used toyota/honda/nissan's 13" rim...

This post has been edited by McRyan: Jul 23 2008, 06:48 AM

myvi rim can fit, but tyre will make you makan fender during corners.

so, which is the most comfy size that wun makan fender wan ?

165
lol
even then, mine makan fender XD

my 165 no problem when comes to cornering.

won't makan fender or what so ever. just nicely fit

does anyone use 165/65R13 here ? or shld i take 60?

that's because my ride height is just 2 fingers off

take 165/65, following the rule of thumb, for every inch upsize, minus 10 off your profile, so now, for every inch downsize, plus 10 on your profile to ensure that your speedo isn't influenced

My was 175/60 14" ori springs, hard cornering wouldnt hit fender oh.. & 165 like narrow abit oh, jz my sense...

stock ride height is okay, but to fit 175, you gotta find 5jj rims and myvi one is heavier than kenari stock that also looks weird. to fit 175 or 185 nicely, gotta get 6jj

What about the stabilizing bar for the rear 2 tyres?? Will it really help the car?
Planning to get one, i heard it's about rm100 for the thing and rm50 for installation.

i don't know there is any stabilizer bar for kenari rear side... there is only either rear anti-roll bar or room bar... anyhow, my pov is, any bars u added to the car, it helps!
rm150 for everything?! i don't think so... rear anti-roll bar will cost u more then rm250 fyi...

is ur guys brake makan ? mine not so makan even juz 4 months old, heard of bendix makan disc, then what is good ?

got such thing mer? ARB will set you back RM250 for 3Max, RM350 for UTR and UR.

bosch, ferodo, Don. cheap, makan, last longer than stock. im looking for high temp drum shoes. my handbrake tak makan coz i brake quite hard and often.