My previous ride use shortshift. Not necessarily faster shifting, but more 'accurate' feel and less 'springy' feel. Look nicer oso. Changing racing clutch is not advisable. One, it will void your warranty. 2nd, waste money, clutch still new. But the most important factor is, you will curse yourself in traffic jam.

---

Added on May 10, 2008, 5:36 pmBTW, just back from Brothers KJ.. hunting for touch screen DVD player.. Interested in Kenwood. Still undecided to go for D/Din or motorized single Din.

This post has been edited by sphiroth: May 10 2008, 05:36 PM

just realized my hud does not properly install. last time i sent to svice center, they open it to check for vibrating at 2.5k rpm problem. thinking about fix it myself but need very very short screwdriver to open the screw behind ashtray. flexible screwdriver cost >rm25, which i think not worth if use only once

then need to wait a few years lo thats why i get old car to play wit

motorized single din better

Like the D/Din better. More cool.

But afraid later people break into my car and stole it.

The single din has detachable face plate. The only problem it will obstruct the aircon vent, unless being intsalled at the lower din.

---

Added on May 10, 2008, 8:06 pmJust back from carwash. That guy told me to get wax speacially for black/dark colour. Anyone knows about this?

---

Added on May 10, 2008, 9:47 pmhttp://www.kenwood-electronics.com.my/cms/General.asp?whichfile=Single+DIN+DVD+Systems&ProductID=371&CatID=

This post has been edited by sphiroth: May 10 2008, 09:47 PM

---

Added on May 10, 2008, 8:06 pmJust back from carwash. That guy told me to get wax speacially for black/dark colour. Anyone knows about this?


I got myself the Kit wax for 0-2 years paint job... But the best now is likt the Turtle Wax ICE... no need to wax, haze and wipe... just wax and wipe... no powdery residue like normal wax... but RM 90++ 1 btl...

That what he said, no white residue.. Suitable for dark coloured car. But for RM90, I'll just stick with my Soft99.

As long as you use a clean cloth to wipe it away then no powdery residue lor....

The problem is at those joint and gap. Impossible to completely removed the residue inside.

Does your soft99 has the white residue too???

Try Meguiar's product
ROXXOR!!

Powdery residue mostly depends on how thick you applied the wax
If its thin then most of the residue will stick to the cloth and you wont notice any loose ones....

This post has been edited by K3N: May 11 2008, 03:05 PM

Its does not matter thin or thick, the problem is, the wax got into gap between bumpers and also between rubber. Those are the problem as it hard to be removed.

You guys your meter light is white right?
I realize that it's not that bright,what about you guys?

Its white alright. Not too bright, just nice. But better if got dimmer control.

Lets change those bulbs to LED ones..

Add dimmer better.. due to the 'cool' factor. If I'm gonna change to LED, I will put a switch for selecting colour. One for white (normal driving) and red (for spirited driving).

hi, im new here..

i got my waja cps last wednesday.. but today already langgar tiang.. got some scratch and also kemek a bit.. anybody know to fix it?? need to ketuk ar? then need to paid for the paint.. arrghh.. so troublesome.. if using soft99 as mention can reduce the scratch is it? or i need to use some special liquid? any suggesstion? thanks..

already got broke paying the downpayment..

btw, my info --> harzrean - burgundy - 5991 - (AT) - Kulim[Waja-CPS]

p/s: seems like i'm the 1st one with burgundy color

This post has been edited by harzrean: May 11 2008, 06:49 PM

You spamming too much already if the residue is alot inside. Just use a VERY VERY thin layer when you wax.It is useless to put a thick layer of wax because in the end you are wiping it off only leaving a thin layer on it. Even if got residue inside you wont notice it cause it is VERY VERY little.
And also you can use a extra soft toothbrush to clean anything in gaps.

PS:Liquid/Spray wax is useless. You use too much and the end product is not as good as those paste wax. But alot easier la of course.

No white residue liquid wax doesnt mean it is more suitable for black cars......in fact paste wax looks nicer than liquid wax on black or white or any colour and it is cheaper.(You use alot less.)

Patience the right tool if you wan to avoid or remove that

Welcome. Sorry to hear bout the accident. Better post some picture here so the other sifu can provide advise.

Patience is something I lack off

Anyone upgrade their ICE yet?

This post has been edited by sphiroth: May 11 2008, 07:25 PM

yup... just change mine to clarion max676vd.. rm2800. i'm looking for the latest one, max686bt.. but couldn't find it. so just take that one. other upgrade were ecotint ray barrier(rm1200) and captor-rf (rm1688). next upgrade... gab suspension ss series.. and maybe some upgrade on speakers

http://forum.lowyat.net/index.php?showtopic=461370

tp tatau bile..duit sudah habis

This post has been edited by kornykrazzies: May 11 2008, 11:30 PM