closed

This post has been edited by coolice: Jan 4 2009, 02:07 AM

closed

This post has been edited by coolice: Jan 4 2009, 02:07 AM

closed

This post has been edited by coolice: Jan 4 2009, 02:08 AM

closed

This post has been edited by coolice: Jan 4 2009, 02:09 AM

What problem you encountered?

blank screen once go into windows,and only after i install driver,but it doesnt happen to maximus formula

hi bro, can give details on bios option?especially on voltage control details.thanks

i only have one shot on this bios
as for the max selection for each voltage option,i got to recheck,board wasnt with me anymore
and i set my self max vcore 1.4v +- 0.03v due to the temperature

This post has been edited by coolice: Jan 4 2009, 02:09 AM

no result for quadcore?

no quad core laying around

edited:
those who r getting this board pls beware that the memset doesnt work

This post has been edited by coolice: Apr 17 2008, 10:52 PM

I am the one who bought the board,

And got same random blank screen when loggin to Windows using Sapphire 3870X2.

Especially after bsod when attempting doing OC.

Another thing Coolice, my Crucial Ballistix PC6400 seems could not go higher than stock speed 800mhz @ 4-4-4-12 eventhough I have pumped 2.2vdimm on it? how Come? Before in my Gigabyte P35DS3L I can go up to 1000mhz stable with my E8400 and relaxing my timing to 5-5-5-12 help plz..

Should use mine mar, I am also interested to know about its powah with quad D:



use 5:6 divider

And abt the incompability of 3870X2? If this mobo still giving me this, I rather switch back to Gigabyte P35DS3L .. As i don't have anymore graph card to test .....

Quite stressed out everytime BSOD then booting up after loading windows sceen no display at all....

random blank screen?i got blank screen everytime after boot into windows and only if driver is installed,clean installed windows and diff driver doesnt help
wat is ur ram max capability for cl4 and cl5?more details on bios setting pls
bios version as well

lalalala

ure gaygaybyte is known to have losse tRD
also could be vtt vs NB voltage.


loosen the trd

if not for 1000mhz Cl4 u need around 2.3v for bus 400

@cstkl1

I will try that later at home.

@coolice

The symtoms persistent especially after BSOD in windows. Then during the vista loading.. then went to blank screen and never recover to the vista login (just blank screen but the graphic card still sending signal to the monitor). But usually after several attempt, then VOILA, can boot into the logging screen, this also similar with my XP as I have 2 OS installed.

- When during booting with Safe mode it stops in CRCdisk.sys and just hang over there..... Some said its the hdd problem, but i checked my HDD all seems healthy.

- If things got worsend, I would pull/plug out/in again all my SATA, RAM, and Graph Card. Then I can boot to windows.

My Timing only set and changed according to the spec 5-5-5-15@533 or 4-4-4-12@400 I saw this on CPUZ and Everest. the rest I set it auto. - And I couldnt change using memset inside windows the rest of the timing.. (as per coolice explanation above)

tell me ure whole ram settings in bios
wirte it here
with ure NB and Vtt voltage

xp is less strenous.. vista is a better os to test stability

Now I am really pissed off, blank screen when loading windows, both XP and Vista seems all the time now, but when loading using different OS (linux or free DOS from Thumb Drive) it seems fine. ANd suprisingly Safe Mode doesn't work.

Will try to changed back with Gigabyte later, now couldn't be bother.... Sigh....

Thumbs up for cheapest X38 to date

i planning on using this board..Now have Xigmatek HDT-S1283 CPU cooler...Is it have any issues? Coz see at the heatpipe and chipset HS...look high...also planning on using this ram...



2 x 1GB PC2-8500 / DDR2-1066 Kit
2GB Kit, 5-5-5-15
EPP / DHX Technology / AirFlow Fan

Is it fully supported? Or maybe blocking issues....