i using the 2 slot model, get frm jy14 few months ago... almost 1/2 year d...

This is my Lian Li PC-A6010, quite good mid tower, removable mobo tray, removable top panel, air duct at the back, and new hdd mounting mechanism. Although its mid tower, quite good for water cooling as the removable top panel ease lotsa hardware installation.






http://www.lian-li.com/v2/en/product/produ...=25&ss_index=62

bought near rm500 at ATE, expensive mid tower...

stacker keep it in penang, poisoned by full aluminium and lian li case

might be use the stacker for my nxt built when i grad, its very tiring moving stacker every sem in and out...

currently the whole lian li rig weight almost same as empty stacker

pinjam apa ?

if stacker i dont think it can be done...

no bling bling, nite shot will be ntg...

as stated at post b4, around rm500, ask for discount... should be rm49x.

anyone here know how to clean the finger prints on lian li aluminium case ?

1st time alu casing user here... i use dam cloth to wipe it off... but some still left a bit...

Some slight updates on my Lian Li PC-A6010:
Front Shot:

Hardware:

Rear View:

Sideview:

Extra:

Radiator Hanging:

one thing i like this case... almost everypart can taken apart... i can open the top panel for cable management, removable mobo tray, removable air duct etc etc

so if maintainance although its more time consuming then air cooling... i put a copper brass tube join there to ease me when flushing the loop. then i can take out the gfx by taking out the reservoir and pump. i think only part need to be cleaned is the hsf for gpu.

but gotto take down the wc system once in a while (around 1/2 year) for cleaning and maintainance purpose...

jz tht i hate cable management for this case, especially bottom area of the mobo... from pic u can see all the cables are there no places to hide...

This post has been edited by lichyetan: Dec 24 2008, 09:20 PM

my new i7 setup inside my Lian Li PC-A6010

Chopped my Ah Lian for radiator mountings, gizz... my poor cutting skill

Internal Views

Cable Management before securing the radiator..


This post has been edited by lichyetan: Feb 19 2009, 11:09 PM

ya... actually i got use PSU extender for more convinient cable management... the lian li psu extender... else every thing will be more pack

initially plan to wc the gpu as well... last time i also used to water cool the gpu... but since my radiator are mcr-220qo, i guess it just can handle i7 (OC'ed of course)... need larger raddy if wan water cool everything but it cant fit in such mid tower... dont like full tower as i moving my pc every sem break from campus to hometown... so current setup make me convinient to move pc around and yet provide mid end water cooling...

i also wish i can get a full tower and fix tri fan raddy on it... but i think current mcr-220qp serve me well.. been using it for 3 years... and also if i use big raddy, the system will become more bulky and loss the purpose i move back to mid tower from stacker last time... i wish to have a bit mobility for my case as a uni student...

borrow rotary tools from frens... straight line using jig saw,,,

This post has been edited by lichyetan: Feb 22 2009, 12:01 PM

just sound insulated my PC-A6010:
Pics here:



This post has been edited by lichyetan: Feb 28 2009, 10:19 PM

slightly better... but effective for the pump, no more vibration sound from the pump. there are improvement there, i can hear the noise is lower with my ceiling fan off in a silent room... but not significant though
the foam i get from the garage sales here... its insuflex... for rm25 u can get 3x4feet d... i bought 2 pieces... use part of it for my PC, rest will go into my car. around 6mm thick the foam

This post has been edited by lichyetan: Mar 1 2009, 12:45 AM

i think i saw tht kind of L-Shaped power cables in jalan pasar b4...

actually tis CM fan quite ok 1 ... 69cfm quieter thn those evercool 2000 rpms

lol.. i mean the black color plastic evercool 1... the aluminium fan i also owned it.. yeah.. the airflow is good...

do bulk in lyn... if got bulk i take 1 of the 390 units...

may I knw the effective way to polish the aluminium to shine again... mine now faded a bit due to finger prints... use water no use, use soap also a bit use nia.. any tips ? my PCI bracket also oxidised a bit... can polish to make it shine again ?