Outline ·
[ Standard ] ·
Linear+
ASUS motherboard overclocking discussion, ASUS mb owners come to discuss here.
|
OC4/3
|
 Jul 8 2008, 12:29 PM
|
.
|
QUOTE(dtdw @ Jul 8 2008, 10:46 AM) above 1.5v ?? wow thats gotta be cooking or even frying eggs already .. hahahah... Well now i have to either reformat the pc or do something abt the BSOD. But it just doesnt make sense cos "what does Overclocking have to do with Hardsisk Failure ?? well it didnt fail, i plug it to my other pc and the HDD works fine. So the question remains, Why BSOD ? OC not stable enough or ram push beyond limit  |
|
|
|
|
|
OC4/3
|
Dec 21 2008, 12:05 PM
|
.
|
QUOTE(besheda @ Dec 21 2008, 09:22 AM) I have a really nagging problem. I currently trying to manually configure my ballistix tracer 8500 2x1g to run at stock speed 1066 with timing 5-5-5-15. It just cant post at all if i set it to run at it stock speed. If it can then the timing would be insane at 10-15-10-30! really slow Ram doesnt seems faulty since it pass memtest. Mobo is p5k pro. Proc q6600 400x9. ram volt is 2.0 Any solution? Perhaps try 1.9V-1.95V?? |
|
|
|
|
|
OC4/3
|
Jan 11 2009, 12:54 AM
|
.
|
QUOTE(RageWeaver @ Jan 8 2009, 09:45 AM) were in the same boat ...but i use bios rampage formula ...cant go for quad over 430...it sux...i guess x38 is just not for ocing....argkhh  ( Dude,Maximus Formula can clock more then 430fsb for sure on quad  Key is GTL Ref  |
|
|
|
|
|
OC4/3
|
Jan 12 2009, 06:22 AM
|
.
|
QUOTE(RageWeaver @ Jan 12 2009, 05:14 AM) U always say that,easy for u to say la...can u give me a anyone who can go 470 lets say ?...with this board?outside LYN also nvm...then i believe u...cause i try search already i can not get...unles extreme like liquird nitrogen ETC... Dude,go to xs and find:Asus Maximus Formula thread,there are like freaking lot of info there |
|
|
|
|
|
OC4/3
|
Jan 12 2009, 02:36 PM
|
.
|
QUOTE(iBenQ @ Jan 12 2009, 06:32 AM) anyone mind telling me, what does clock skew mean? @@ totally no idea about this >"< Hard to say,only tweak once but something like:Delay or advance the bus,depend on ram etc etc and vmch  I know it but kinda hard to say to you,basically it give better performance or better stability,tied to your ram mostly(How well bin,chipset etc etc) |
|
|
|
|
|
OC4/3
|
Jan 15 2009, 01:50 PM
|
.
|
QUOTE(cstkl1 @ Jan 15 2009, 10:20 AM) u had mf?? u sure or not. dont u have only some p35's etc also please refrain from giving advise on skewing until u have tried a mobo with full options and the difference with ddr3 and ddr2 Clocked MF before This board,gtl ref and clock skew is important. I clock on some not well bin/non d9 ram so got to delay some skew else it won't stable |
|
|
|
|
|
OC4/3
|
May 25 2009, 12:01 AM
|
.
|
QUOTE(campsol2k @ May 24 2009, 04:43 PM) reached 440 fsb easy if set PL to 8. starting from 450fsb need to set PL to 10 else can't be boot. reached 500fsb with PL 10 Try higher ram divider and tighter timing,500fsb should be able to hold pl8 assuming your setup can take it(Ram,nb) |
|
|
|
|
|
OC4/3
|
May 25 2009, 02:25 PM
|
.
|
QUOTE(campsol2k @ May 25 2009, 12:25 AM) I'm not sure it will apply to my proc coz u're using duals whereas i'm using quads.... tried other RAM which is not D9GMH... the result was still the same... You need to run higher divider,that all |
|
|
|
|
|
OC4/3
|
May 25 2009, 08:02 PM
|
.
|
QUOTE(campsol2k @ May 25 2009, 04:33 PM) which means lower mem clock? from what i understand... higher multiplier will cause the mem runs higher clockspeed... higher divider will cause the mem runs lower clockspeed... nah tried it... still can't be booted.... No no,higher ram clock |
|
|
|
|
|
OC4/3
|
May 27 2009, 04:57 PM
|
.
|
QUOTE(campsol2k @ May 26 2009, 09:04 PM) Here are my findings... Ok.i've tried it.. stil not happening despite lower/higher mem clock ... however... if i increase the vCore 1.25V maintaining the VTFSB 1.2V(previously the vCore is 1.23V) weirdly it boots! Managed to get 500FSB with PL8 with that voltages...with multi x7 if i decrease the vTFSB to 1.1V maintaing the vCore 1.25V it wont boot... so i guess both vTFSB and vCore responsible getting the board running at PL8...my statement(bolded) is a bit vague....coz i'm still experimenting with other voltages n see if they will affect the PL... Hmmm i guess gtl ref,vnb and vtt |
|
|
|
|
|
OC4/3
|
Jun 5 2009, 04:23 AM
|
.
|
QUOTE(campsol2k @ Jun 4 2009, 08:51 PM) Thx 4 the info. I already reached 500fsb with PL8... about my statement regarding the voltage that i've been experimenting isnt true at all... i guess i've been messing up with some settings i wasnt even realize... that's why my pc can't be booted...  @OC 4/3 i was wrong... nway, thx 4 your guidance... Kekekekkeke google go learn more and you will know Or talk to some good ocer and they will guide you I am so lucky to meet generous sifu on here Anyway,post here and ask if you have any question |
|
|
|
|
Quote
0.0282sec
0.41
7 queries
GZIP Disabled