for 10th anny should be ok
balistix tracer hard to say
somehow i feel like tracer's chips are fragile

it's not about risk taker.. but bout the ability of the ram itself..


This post has been edited by xixo_12: Mar 25 2008, 09:12 AM

so theoretically can our BE go 3.5 upwards or its just stuck at 3.4 only....

feeling like 5000 BE lock at speed 3.35g.
try below 3.35g ..no problem.
over 3.35g ..only can boot up bios..but cannot loading into windows

he..he..mine 2.0v daily also...

you won't feel that you're taking risk if you truly understand the limit of your hardwares

how much vcore you pump for that?
from your pi 1M SS ( if vcore is not extra pumped ) ,you need better cooling for your proc in order to go further

well i am a bit frustrated coz i tot BE can go higher than 3.35g or is it coz we r using air cooling...

try at 15x223 = 3345 mhz ..at vcore 1.55 . no problem
try at 15x225 = 3375 mhz at vcore 1.65 cannot loading into windows
i still thinking wat is the problem..and lower the ram divider oso cannot

yeah that indicates the proc is too hot to boot into windows
try lower down the temp by a few Celsius (eg. air cond + air cooling, peltier+ air cooling )
my proc cannot boot into windows also at 3.6GHz with air cooler , unless i switch on the air cond

This post has been edited by dblooi: Mar 25 2008, 09:44 AM

need air cond arrr...have to bring to office la like this(house no air cond) put in my studio set air cond very2 cold one
then...

maybe u rite...will try it tonite again.

TOO hot TOO cold
the proc doesnt want to boot
try to oc outside the casing.. then u can use ur full potential of ur air cooling

its not the case when you live in northern kedah ... its too TOO hot in the daytime

oc always at the nite

lolz OC is to find at place where we can use 24/7 not only nite ....

better get a good HSF and find the point to use 24/7

haha..misunderwstanding..we talk about benchmarking now

actually the temp looks fine,
40C-50C , just that couldn't boot into windows no matter how
once i turn on air cond, bingo
3.6GHz here you go

ohh, wanan fight DB record ar

@digswell .. the thing u said that hang when loading windows .. does it happen after the loading screen ?

it happens to me just now for the first time .. i edy afraid that my ram is now working ...

try to swap with my friend's ram .. everythings fine ..
then when i try mine .. its working again .. scared like hell ..

bro, well that BSOD usually happens to me to when my setting in bios got something wrong like over voltage my ram
so when i checked back in bios it will state that my vdimm is fail rather than ok... or maybe something else but have
to wait for all SIFU"S to wake up first la....