Off topic : Im sure PC enthusiasts are everywhere in Malaysia. Take an example, Karom, he brings the rare stuffs for northern region and where he stands now ? So it'll be a good try tho. At the same time you able to fulfill the demand of OC-ers in Malacca, without having them to come down to KL or further places to get their hardwares (and expertise advices)

On topic : I was thinking of trying 3.4ghz but fussy about the vcore and temp, so would the 3.3ghz be good enough consider 1.31v load (1.33v idle) for daily ? Still thinking to push it further or just let it be

thanks for ur comment..for me, 3.3 is gud enough..coz the vcore already reached 1.375

Aite, thank you, then I'll just let this 3.3ghz be my 24/7 setup.

p/s: And do let us know if you plan to go with your business, we'll come over for the opening ceremony (And of koz I want discount haha)

biostart tforce 590sli also do not have vdrop problem.. the vdrop will increase about 0.2v compare to bios setting and it will keeping same vcore from idle to full load.

opss..not increase 0.2, but perhaps 0.02

---

Added on March 22, 2008, 8:18 pmthats good support there..noted..
ill try my best to do this..wanna do a complete revision bout this first

This post has been edited by alive88: Mar 22 2008, 08:18 PM

Hengmy, I thought U sold your mobo liao ? Last time tempting to get it same like alive88 right ?

yaya.. it 0.02.. thx for correct me

---

Added on March 22, 2008, 8:26 pmyaya.. it sold ady.. now playing with entry lvl of intel.. e2160.. but miss that board..

This post has been edited by hengmy: Mar 22 2008, 08:26 PM

Yeah posted as me. I forgot that I'm using someone else's PC

Btw, unit down I repeat unit down !
My OS hdd is down (I guess) since my previous attempt above 3.1GHz. How sad was that

No doubt,grab a AC 64

Btw,ah still no one can help me?My bios now stuck after saving in HTT 220.It stuck there very long..
What has caused this?

Y AC 64 =/...I'm using BE leh..Quite hot atm...Now trying to lend a CM Hyper 212 from a friend...

try tis...after saving bios setting,wait for 2 or 3 sec then press 2 time reset button. then see can eazy boot up or not

Will do dat now digswell

Hold on,Press 2 time means no nid hold?Just press it twice at once?

Well,trust me,you bought it RM 80 i believe it will give you a satisfactory =D.

This post has been edited by AMDAthlon: Mar 22 2008, 09:02 PM

be should have no problem even running 3.2 with hyper tx.
but im upgrading to s283 with 110cfm fan.

Wats the temp on ur CM Hyper TX boss on idle and load...

after u saving bios ..is hard to boot up or cannot load into windows??
my ta770 sometime nid to do tat if i changing oc setting like htt and multipier

anybody?got any comments bout my offtopic subjects?

cheaper cm hyper tx2 is enuf bro..i think u no going to oc higher. tell u the trust tat BE 5000 is very hard to oc over 3350mhz even with vcore 1.6v
my BE oc 3.2g load is 55 idle is 42

This post has been edited by digswell: Mar 22 2008, 09:10 PM

Its hard to boot up i guess.After save,IT STUCK/NOT RESPOND IN BIOS.MUST SHUTDOWN VIA Switch = =.And then reset the CMOS..Dam

mean after u saving bios ..the power light at ur casing didnt power it rite ??? if so u can try press 2 time reset button at ur casing.
my mobo oso like tat.
sometime it nid wait for 5 to 8 sec to boot up.. tat y many ppl say ta770 hving slow bootup problem

oo.Will do it now.Lets give it test.

IT WORKS!Now at 2.2Ghz

Now will give it 230 HTT.Lets see

Now at 240HTT

Wow,how come it increases greatly.

This post has been edited by AMDAthlon: Mar 22 2008, 09:35 PM