@AMDAthlon, its good to see u back in action On ur fail attemp, how bout trfc?

Maybe stick wif 5-5-5-15-20 first Use trfc at 127ns If can't go further later then use 195ns one

This post has been edited by za_az: Mar 23 2008, 12:20 AM

Did u set at memset to save setup for next startup? If not could be due to ur bios is my guess

I'd rather not save the memset so all my oc is from the bios one

@xwteoh, nice result for fp-y5 Mine stuck at 900 oni Any tips

Maybe u got a good batch one Later gonna squeeze more from my ram

@xTraVagaNza, who u referin to

This post has been edited by za_az: Mar 23 2008, 01:25 AM

Juz set multi at 10 then ram divider is 6.. So goin 2.7 ram oledi at 450 Push more to see if it works more than that If not, its my ram limit edi at 450

@xwteoh, u need to post another template for da oc result one, refer to page 1, one u posted edi is superpi 1m one

This post has been edited by za_az: Mar 23 2008, 01:42 AM

Think oni u use ta770 one here wif 4000+ one for now... Maybe later im gonna change to it or maybe ta780g one

1.52v at 2.9, aint that one high

This post has been edited by za_az: Mar 23 2008, 11:35 AM

You mean to get em load or stable...? Me manage to get 2.9@1.31v, but juz to make it pass spi 32M one Then skip to go higher My stable now is 2.8@+0.025v Orthos ~2 hours oni, lazy to make longer

This post has been edited by za_az: Mar 23 2008, 11:26 PM

Glad to hear that Seem like da board is not a let down one

No need, one TT session is fine

BTW, later dun forget post spi 1M one Support our 4000+ spi one ma

How bout ram timing? And trfc? Wait, ram divider oso KVR one right?

Btw, later better put spec on ur sig so easier for people to help...

This post has been edited by za_az: Mar 25 2008, 01:21 AM

@rainzai, can use 5-5-5-15-20 one Set trfc to 127.5ns first and try boot, ensure trfc is for da right dimm 1&2 or dimm 3&4..

Later if still fail, might wanna try 195ns one

This post has been edited by za_az: Mar 25 2008, 01:51 AM

To put some heat for all to oc back


Attached thumbnail(s)

I just wish it is.. Right after i post it, orthos oledi fail Maybe need another step of vcore

Just notice one thing, my last orthos is stressing ram oni

This post has been edited by za_az: Mar 26 2008, 10:12 PM

Not stable enough Adding 2 steps of vcore oso fail orthos but lasts lil longer than that.. How much does it really need to make it stable

Anyway skip that one edi, now at ~3.0@1.44v.. Maybe later will find that one for stable one

Bro, db oso in oc mode Nice cooler At least i'm not alone

This post has been edited by za_az: Mar 26 2008, 11:31 PM

1.52v So much to add Later gonna try it Thnanks

I'll put my pic later bro db

This is what i manage to get for today



But the probs is spi 32M fail while Orthos just last less than a minute

Any suggestion?

Aite will give it a try Gettin tired edi today Gonna continue this one tomolo Thanks

Seem like this is my best result Bro pWs, later update me please...

AMD Athlon64 X2 4000+ Brisbane G1 | za_az | Biostar TF7050-M2 | Kingston Value Ram | 787.5MHz | 5-5-5-15-22 | OC3 HP-1204