Yeap i do the correct way as u said.Its still cannot be powered on.For more info visits here http://forum.lowyat.net/topic/675552
How to know whether the Mobo or the PSU is faulty?

This post has been edited by AMDAthlon: Apr 17 2008, 12:40 AM

whats your VCore?And next time find the rights thread,There is already AMD Overclocking thread.

It needs to be increased for stabling your processor.However,if it is higher it give more risk to your processor

Hey what so bising2 about me.Achieve 3.3Ghz stable no BSOD.
Hope can reach 3.5

This post has been edited by AMDAthlon: Apr 18 2008, 11:36 AM

Guys sometimes or quite often the BSOD will still appear if more than 3.3..Wonder why AND i seems cannot boot windows if 3.4 Ghz.Is it causes by the ram Limit?Or maybe need the 8 pin one? Btw the picture


Any comment guys?And i feel that Everest make my Comp BSOD

This post has been edited by AMDAthlon: Apr 18 2008, 07:23 PM

hmm..i think BSOD causes by not enough power to stable(using 4 pin now).As requested by bro digs settings has set to default.Real Oc starts on Wed as i get my ST56F

Using the same configurations?What you mean by can or not?Can boot windows?But emm i think need to switch to DDR2 800 le = =


@Digs

Come MSN

This post has been edited by AMDAthlon: Apr 18 2008, 07:59 PM

OK will try now,If BSOD also?

No need try le.I even pump all u stated 2 pump.Still BSOD
Come MSN lar,later someone bising

This post has been edited by AMDAthlon: Apr 18 2008, 08:10 PM

lolol.Max also 1.57 what.Will burn mehz?

Hmm..you no advice ah?Really need help..

Hmm..2.2 only wor.= =

I dont think so.The temp never rise up more than 50C.PLUS the BSOD says,the secondary processor cannot bla bla..forget edy..Is it causes by the temp?

50C is load = =..

And Xixo

Hows the Keychain's doing?

Increase your Vcore maybe to 1.4V try hit 2.9Ghz.Vdimm maybe 2.0?AND YOUR COMMAND RATE SET TO 2T!

This post has been edited by AMDAthlon: Apr 18 2008, 09:44 PM

= = actually the speed you should increased altogether with the Vcore.Try up it to 2.9 with 2T Command Rate.

No yet wor.I think it will reach us on May with B3 Stepping.Cos currently B2 only avail in OEMS?

Relax..will share it next week

Nope,you have to change it to lower for stability.

= = ST56F able to support it.So u getting it?Btw i think your PSU can support,can show us your PSU Detail Picture/Link?
But the price
I suggest you better wait the real ones.Cheaper
The 9550 should only RM 600
Well..nvm if u cant wait just grab the 9850 its 900

This post has been edited by AMDAthlon: Apr 19 2008, 01:27 PM

Sadly it cannot support I THINK.Need digs help you
Cancel your Mobo and F3 Sales Now!

This post has been edited by AMDAthlon: Apr 19 2008, 01:30 PM