Icic err.. my mobo bios show it is 52'C for cpu, alright? me now try 14multi first

Try to lowest multi and increase HTT to maybe 350? Den we can see your maximum HTT whether it has reach wall

Btw,CPUZ,Memset pictures are needed.

HTT mean HT speed? So u mean i need put lowest multi= 13x and increase the bus speed?

Btw my cpuz always show my vcore oways change, like 1.325-1.360, i put 1.350 then it will change fronm 1.344 to 1.370 izzit alright?

This post has been edited by Aeonical: Mar 30 2008, 01:56 PM

i always stat at 10 for easy reading and calculation..

icic so that mean i just put 10x multi then 350 bus speed right?
14x multi passed under 10min test

-edit- guess no possible 350 =.= haiz totally noob i am 3.5ghz's crazy

This post has been edited by Aeonical: Mar 30 2008, 02:08 PM


Attached thumbnail(s)

@Aeonical, is ur ram really 533 or 667? Coz based on ss, i think it's 667 one

ooh yeah...52 o_O....Using stock hsf ar...Normal lor.. I think by default, most mobo auto detect 667 rams as 533...I wonder y

This post has been edited by Lacus: Mar 30 2008, 02:12 PM

>.< duno o what my ram is..That one my big bro buy de which cost rm150 each 1year before

OH i finally boot up at 10x multi and 240 bus speed.. what tat mean? is it mean my mobo simply too weak to oc?

-edit- i try 260, 280, 300, all fail during bootup

---

Added on March 30, 2008, 2:18 pmSo although it deteced as 533 still function like 667 right?
-edit- 52 high ma? My hwmonitor show 23'C only

This post has been edited by Aeonical: Mar 30 2008, 02:24 PM

5000+ BE stock running at 2600mhz..260 actually shouldn't be a prob. try pumping 1 step vcore...or u ram edi hold u back..
drop down the divider tgk...use 400..

@Aeonical, see at SPD option in cpu-z, will know ur ram speed To oc more try use command rate(CR)=2T

Mm..my mobo seems cannot adjust ram setting Cant find option for the command rate =.="

---

Added on March 30, 2008, 2:28 pmSry mr_habuk what is divider tgk? Ram right?
-edit- Thx mr habuk i reduce ram to 400 and successfuly boot up with 10multi n 260,
May i know the test used to test my ram?
my proc 14.5 multi test 10min stress done without problem

This post has been edited by Aeonical: Mar 30 2008, 02:37 PM

You want more detail how to mod the thing?
ok if i find some time i will write detail article how to do it.
You want to mod bios ar?

i suppose ur bios have ram option <800> <667> <533> <400>
set it to 400..ur ram might limited ur clock..

ps..actually i was trying to say lower down ur divider 'tengok' not divider tgk..hehehe..my bad..

Haha i ord reduce to 400 able bootup, so now i continue add my bus speed right?

u can check on the first page for any link to test ur ram..

yup...continue step by step..

zzzzz, just now change ddr2 400 to 667 need reset cmos =.=" let me haf such a hard time pick up the small jumper..

-edit- no i mean err the ht speed test is used to test what component?
This post has been edited by Aeonical: Mar 30 2008, 03:32 PM

Good thing come too late . Hmm but maybe can get it for my backup rig. Abit NF M2-s got no voltage controls so this proc will be perfect

Omg..reading this thread while doing assignment actually make me feel like OCing instead of doing it

lol..Btw i feel tired of oc my rig Mayb after exam..=.=" Now use default better..

OC is fun ==" I got addicted when ocing my sempron ...