ENough la bro!!!! My system which is just semi Burntest stable can run orthos forever and so far i hvnt had any crashes or system hangups despite running comp more than 24 hrs. 1.55v is pretty high ady and your increasing chAnces of proc degradation

though....back in the day i did do some crazy evil things with just air cooling too



Those were the days

My proc is still alive. And I only used that voltage and speed to run superpi1M Never dared stress both cores at same time.

Hmm.....these cheap tracers. I'm guessing they aint D9GMH. How high do they go? Anyone tried??

After 7 to 8 months, I finally decided to tweak my OC setup again... And surprisingly, I got a tiny 40MHz increase without additional voltage raise even though it would have BSODed in the past

But I still couldn't get pass the 400MHz FSB wall no matter how much vcore I pumped, overvolting FSB voltage and (G)MCH voltage yielded no results. 400MHz will give me frequent lockups, while 401MHz and beyond... Simply a black/blank screen

Does mobo and RAM affect FSB wall? My friend with an E2180 also can't get pass 400MHz (Black/blank screen), both of us use the same mobo (EP35-DS3R), same brand of RAM (Kingston) but different chipsets. Any pros here can help me out? Thanks

Thanks for the responds guys
Hmm... Maybe you could try to loosen the timings and see how things go. My KVR can only hit 8xxMHz @ 5-5-5-15, but 948MHz @ 5-6-5-15 w/2.1V, both settings are IBT stable 100/100. 948MHz @ 5-5-5-15 w/2.1V also can lar but always hang/BSOD, and somehow better results in Evereset benchmark @ 5-6-5-15 compared to 5-5-5-15
Here are my current IBT stable settings:

FSB = 395MHz
CPU Multi = 8x
CPU Clock = 3160MHz
vcore = 1.35V
FSB:DRAM = 5:6
DRAM Frequency = 948MHz (474MHz*2)
Timings: 5-6-5-15
Performance Level (tRD) = 6
vdimm: 2.1V

Unstable settings:

FSB = Equals or more than 400MHz
CPU Multi = 6x/7x/8x all tried liao
CPU Clock = Depends on the above lor
vcore = Max I tried was 1.55V
FSB:DRAM = 1:1
DRAM Frequency = Also depends on the above
Timings: Auto
Performance Level (tRD) = Auto
vdimm: 2.1V
Okie, I'll try with 410MHz now.
coolice just posted one yesterday, more than 4GHz

---

Added on September 17, 2008, 11:45 am
Any risks in doing that? Scared later short circuit or something because I'm noob with that kinda thing But most of you here don't even need BSEL mod also can get pass 400MHz wor, I can't

Your FSB quite low edi. Mine couldnt go lower than 166mhz. I tink its ram related

Mann... Overclocking really shorten da procs lifespan...   My Old E2180 is really critical rite now...   Now running @ 3.0ghz edi... I wonder how long more my proc can last b4 it really give way...   Gotta back up my work quickly...   Once my old baby rosak edi, I m gonna get another E2 series n back 2 O.C   Long time dis thread been idle

E2170??? I think u r referring 2 E2160??? Respect u....   Me too... After my E2180 kong also gonna get another E2XXX series... Maybe if can get a gud E2180...   Lots of sweet memories while Ocing my E2180...    N now, its going anytime...     Nearly a year I stop playing OCing, but still got knowledge bout ocing dis E2XXX...   Juz hav 2 polish it up... hahahaaa...

Keep up da E2XXX Overclocking...   I wonder wat happen 2 all da pros n sifoos???

---

Added on February 10, 2009, 1:42 am

Still can run... Izzit bcuz I leave my pc running 4 nearly a year???   Evrything else seems 2 be working fine. Cooling, Mobo, PSU n all...