Intel Celeron (E1XXX) & Pentium Dual Core E2XXX, Discussion & Compilation [v2]
|
|
 Sep 8 2008, 09:24 PM
Return to original view | Post
#1
|
 
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1  
|
hmm, i wonder how much i'll able to OC an E2160 and E2180 if using a stock fan?
edit: i saw most of them able to reach more than 3GHz on stock cooling. so my question is, which processor is my best bang of buck in buying?most of the results are leaning toward E2160  This post has been edited by cloudstrife07: Sep 8 2008, 09:28 PM |
|
|
|
|
|
Sep 9 2008, 09:04 AM
Return to original view | Post
#2
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
QUOTE(joe_star @ Sep 8 2008, 11:08 PM) IMO with (stock) cooling your best bet would be if you can find a E2140 G0 stepping. You should be able to get 1 for RM200, add on a cheap cooler, and 3.4ghz should be yours  But otherwise, yea. Other E2XXX procs are decent as well. Mine did 3ghz with stock cooler, but temps were arnd 70  QUOTE(hilmiangah @ Sep 9 2008, 05:31 AM) my 2180 can run at 3ghz on stock cooler but the temp is around 70'c max but on some benchtest that i run the performance went up more than half.but now im using hyper 212 and running at 3.2.cant go higher coz im afraid to play with voltage. but then again, it's quite hard to find a e2140.but i'll try scouting for it.how bout e2160 (m0) vs e2180 (m0)?it seems e2160 is the better choice right?cooler than e2180 and more OC-able..correct me if im wrong  |
|
|
Sep 9 2008, 01:14 PM
Return to original view | Post
#3
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
QUOTE(tech_frix @ Sep 9 2008, 09:46 AM) EX e2160 USER HERE.. meaning stock multi, and only up the fsb right?for me, d proc serve me well... 3ghz on stock and 3.2 on 1.4++....cant remember edy... and d temp is really cool... i tested Assassin Creed for this proc and with 1280*1024 reso, 3ghz can do wonders... just make sure use low multi and high fsb... setel... however i do hope can reach 3Ghz once i get this proc due to budget/value RAMs... |
|
|
Sep 9 2008, 01:23 PM
Return to original view | Post
#4
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
QUOTE(hilmiangah @ Sep 9 2008, 01:17 PM) no problem la. im using budget aeneon 667,run my proc at 3.2 and set the divider for the ram to run at 800 no problem at all.its a setting i use everytime. hmm ok. will try it once i get this proc. damn, OC is so tempting~last time OC duing p4 era. loooonnngg ttiiimmmmeee agoooooo QUOTE(Alienwarez @ Sep 9 2008, 01:20 PM) i think e2160 can push beyond 3ghz with kvr hmm, this is interesting. using KVR 800mhz here.QUOTE(tech_frix @ Sep 9 2008, 01:20 PM) nope...u can try lower ur multi and add d fsb... erk, more vcore eh?stock vcore cannot?it should work... but u need to pump moar vcore...  |
|
|
Sep 9 2008, 02:13 PM
Return to original view | Post
#5
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
QUOTE(tech_frix @ Sep 9 2008, 01:30 PM) u can try boot #stock lor 1st.. yesh bosh if cant, then start add up ur vocre k?? Added on September 9, 2008, 2:14 pm QUOTE(hilmiangah @ Sep 9 2008, 01:27 PM) yes more vcore but not too much. yeah, not yet buy, im still doing analysis on what proc to buy around 200 range. try .5v at a time. and what mobo didi u use?? and i suppose u have yet to buy the proc rite.... board?no board. i thought of getting T-power i45, but then CF mode not stable. i need to CF my cards perhaps 6months later. heard that Gigabyte EP45-DS3R also is a good buy. This post has been edited by cloudstrife07: Sep 9 2008, 02:40 PM |
|
|
Sep 9 2008, 04:01 PM
Return to original view | Post
#6
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
QUOTE(hilmiangah @ Sep 9 2008, 02:53 PM) yep e2 series quite good. nah, i don't expect 4Ghz on stock cooling. even using aftermarket air cooler also i doubt it'll reach at that speed.just dont expect 4ghz dah la. |
|
|
|
|
|
Sep 10 2008, 09:58 PM
Return to original view | Post
#7
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
edit: i gave up on CF and SLI
This post has been edited by cloudstrife07: Sep 10 2008, 11:17 PM |
|
|
Sep 11 2008, 01:53 AM
Return to original view | Post
#8
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
hmm what RAM should i buy eh within RM230 budget?Crucial Ballistix 2x1GB?what timing and what speed?
|
|
|
Sep 11 2008, 09:54 AM
Return to original view | Post
#9
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
ok, one step close to complete my rig now.
what should i buy: 1. Crucial Ballistix Tracer 2x1gb kit from Shawty's promo + Sunbeam Core Contact Freezer or 2. 2x2gb Crucial Ballistix Tracer from Kucingfight's sale right now got intel stock HSF, the e2160, Biostar t-power i45 mobo and a Gainward GS 4850 HD graphic card. |
|
|
Sep 18 2008, 03:52 PM
Return to original view | Post
#10
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
hmm, it'll be awhile before i can join u guys.
since raya is near, all money allocated for that purpose already.  |
|
|
Sep 22 2008, 05:20 PM
Return to original view | Post
#11
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
QUOTE(dro @ Sep 20 2008, 02:59 PM) care to share ur setting on mobo? haiz bro. what to do. raya is nearing..why la good offers only comes when i got no money why dun u try lowering multi  |
|
|
Dec 8 2008, 11:33 PM
Return to original view | Post
#12
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
anyway, any specific revision for E5200 for easier OC?i doubt there's G0 for E5200.
|
| Change to: |  0.0428sec
 0.47
 7 queries
 GZIP Disabled
Time is now: 15th December 2025 - 01:51 PM |
Quote