Outline ·
[ Standard ] ·
Linear+
Intel Celeron (E1XXX) & Pentium Dual Core E2XXX, Discussion & Compilation [v2]
|
Without
|
 Mar 20 2008, 12:01 PM
|
|
QUOTE(ocz @ Mar 20 2008, 01:51 AM) It is bro???? well,i am tempted looking at those E6 series getting less superPI score with high cpu freq. 
Added on March 20, 2008, 12:52 amI can get it for RM205 brand new. MO stepping. get e2160 instead of e2140 & e2180 e2160 with stock vcore you can easily achieved 3.0ghz..  for e2140 you must be lucky to achieved 3.4ghz , e2180 hardly achieved 3.4ghz even with high multiplier  |
|
|
|
|
|
Without
|
Mar 21 2008, 09:04 AM
|
|
|
QUOTE(joe_star @ Mar 21 2008, 09:00 AM) Started overclocking with my pentium 2160 yest. Currently got this far  Am a lil worried as the temp reaching 55C with my tuniq tower  . Is this normal? with orthos it's normal.. try 378x9 vcore 1.45 |
|
|
|
|
|
Without
|
Mar 23 2008, 12:10 AM
|
|
|
will try suicide oc too  |
|
|
|
|
|
Without
|
Mar 23 2008, 01:36 AM
|
|
|
hard to achieved 3.7ghz with 667 ram =.=" will keep try on it.. now running 3.2ghz on stock 28c idle with no thermal paste. |
|
|
|
|
|
Without
|
Apr 30 2008, 06:44 PM
|
|
|
tell us your e2180 3.6ghz voltage |
|
|
|
|
|
Without
|
May 1 2008, 08:47 AM
|
|
|
QUOTE(dblooi @ May 1 2008, 03:30 AM) new super pi 1M result, 15.766s looks like sub 15s for E2140 is possible [attachmentid=458228] cpu-z validation: http://valid.x86-secret.com/show_oc.php?id=3543701.36 vcore ? tempting to get 1 |
|
|
|
|
|
Without
|
May 2 2008, 07:37 PM
|
|
|
QUOTE(heizad @ May 2 2008, 06:57 PM) no..coz the mobo bought from a forummer so for rma need to send straight to the distro...i've tested6 mobos with my proc ram gc n hd..no prob at all...but my ds3 got no display and also no post beep... did you reset cmos? |
|
|
|
|
|
Without
|
May 10 2008, 09:29 AM
|
|
|
mine 3.2ghz 1.34vcore.. load 46temp see VID  currently use kingston value ram.. cant oc far.. 
|
|
|
|
|
|
Without
|
May 10 2008, 10:57 AM
|
|
|
QUOTE(sniper69 @ May 10 2008, 11:08 AM)  good one indeed better than mine... i pumping 1.475V to get pass over 400MHz FSB   400x9 using 1.475?  i think 400x9 need over 1.55vcore.. maybe ram pulling me back coz using pc5300 ballistix.. |
|
|
|
|
|
Without
|
May 10 2008, 01:20 PM
|
|
|
some batch of e2160 does 3.2 or 3.0 easily.. but go furthermore need alot vcore |
|
|
|
|
|
Without
|
May 10 2008, 07:47 PM
|
|
|
QUOTE(bryanyeo87 @ May 10 2008, 02:26 PM) using what cooler? water? and approximately what sort of ambient temps Xigmatek S1283 + Tuniq TX-2 poison u ambient temp - 20c -22c.. in ac room..
Added on May 10, 2008, 7:48 pmQUOTE(tech_frix @ May 10 2008, 07:29 PM) i believe he is using Xigmatek S1283...  u're correct  This post has been edited by Without: May 10 2008, 07:49 PM |
|
|
|
|
|
Without
|
May 11 2008, 06:37 AM
|
|
|
QUOTE(bryanyeo87 @ May 11 2008, 01:12 AM) ouhzz, using the same thing ._." where can poison me wan, i was one of the xiggy beta testers last time ouhzzz with aircond ambient 20~22 coz thought something was wrong with my lapped e2160 and lapped xiggy too, coz my load at 56c, but ambient like 33c (using a lab thermometer) XD i din't lap my processor me using coretemp.. touch the processor feel nothing =.=" |
|
|
|
|
|
Without
|
May 11 2008, 02:08 PM
|
|
|
QUOTE(Without @ May 11 2008, 07:37 AM) i din't lap my processor me using coretemp.. touch the processor feel nothing =.=" my screenshot time is afternoon 1.29pm.. under sun if night time the temp sure |
|
|
|
|
|
Without
|
May 11 2008, 06:16 PM
|
|
|
QUOTE(Liuteva @ May 11 2008, 06:58 PM) Stock cooling + tuniq TX-2 E2180 M0 @ 3000MHz idle 43, load 68 your temp is without ac? fan speed change to 100% |
|
|
|
|
|
Without
|
May 11 2008, 07:43 PM
|
|
|
QUOTE(Liuteva @ May 11 2008, 08:08 PM) Yup.. no aircond is open and vcore is 1.325V. between @Without How to do it? Cuz i juz change Intel. Before that i was play AMD. mine in ac room try push your e2180 to 3.2ghz without pump any vcore. |
|
|
|
|
|
Without
|
May 11 2008, 08:45 PM
|
|
|
QUOTE(Liuteva @ May 11 2008, 09:13 PM) Nope. I mean how to change fan speed to 100%? bios disable fan control.. and change to 100% make sure you can tahan the noise |
|
|
|
|
|
Without
|
May 12 2008, 04:27 PM
|
|
|
QUOTE(Liuteva @ May 11 2008, 11:28 PM) Xigmatek HDT S963 already enough |
|
|
|
|
|
Without
|
May 12 2008, 08:58 PM
|
|
|
QUOTE(BurgerRI @ May 12 2008, 09:39 PM) I'm using a E2160 running on a Abit IP35-E, I'm only able to get 3.0Ghz (333Mhz X 9) prime stable at 1.54v Vcore. This seems to be a tad high, if I set the speed to anything higher than 3.1Ghz, the rig will auto restart when running prime95 or orthos....anyone encounter this odd behavior? Is it my mobo or the proc? erm.. post your screenshot of cpu-z. |
|
|
|
|
|
Without
|
May 19 2008, 02:47 PM
|
|
|
atcually it's worth to get 3.5ghz with stock vcore.. with price RM220 i don't think E2200 series will get those speed as well.. this just my opinion |
|
|
|
|
|
Without
|
May 26 2008, 10:46 AM
|
|
|
QUOTE(davidbilly87 @ May 24 2008, 05:45 PM) that furom using IE can in without problem....if wan reg.....u need choose the ...no buy any foxconn product ....if not will lag... ....i go there open new tread ...no ppl answer me 
Added on May 24, 2008, 4:46 pmi think can oc over 1066 .....  ....but i no think it can native support for over 1066.... erm....i got 1 qustion.....the E2160 can tahan at 70c~72c?....i 333*8 = 2.66 ......with prima5 test .....it became very hot .....but my mb software show is 70c....but using coretemp show is 65~66c....which 1 i can trust ? stick with your mobo software. how come 70c above , did you raise anything other than vcore. |
|
|
|
|
Quote
0.0456sec
0.37
7 queries
GZIP Disabled