Outline ·
[ Standard ] ·
Linear+
Intel Celeron (E1XXX) & Pentium Dual Core E2XXX, Discussion & Compilation [v2]
|
hilmiangah
|
 Aug 27 2008, 08:36 PM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(a1098113 @ Aug 27 2008, 07:26 PM) on cooling for below rm150, go for hyper 212... super cooler  well that is what i have in mind but have to letgo a few ram 1st. and what is considered stable oc???
Added on August 27, 2008, 8:38 pmQUOTE(joe_star @ Aug 27 2008, 07:12 PM) Haha....start looking in garage sales, maybe can sell your proc n get a better one thats proven at oc-ing, maybe cost u RM20 or 30 extra only  if like that better get a new proc. im thinking of e7200. This post has been edited by hilmiangah: Aug 27 2008, 08:38 PM |
|
|
|
|
|
hilmiangah
|
Sep 2 2008, 03:02 PM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(tech_frix @ Sep 2 2008, 01:22 AM) add RM20 and u can get one of d best cooler in d market..  :ketupat2: ccf u mean??? maybe after i fed up the hyper 212 first.
Added on September 2, 2008, 3:04 pmand im waiting for my yet to arrived hyper 212. maybe after that i can run my 2180 at 3.2ghz..... anyone has run it at that speed and at what vcore???? This post has been edited by hilmiangah: Sep 2 2008, 03:04 PM |
|
|
|
|
|
hilmiangah
|
Sep 3 2008, 01:01 AM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(joe_star @ Sep 2 2008, 09:04 PM) My 2160 does 3.2ghz at 1.42v do u run ur it all the time at that setting??? hows the temp??? |
|
|
|
|
|
hilmiangah
|
Sep 4 2008, 12:38 PM
|
Kongsi Gelap Elite Ramadass
|
best la tech frix....
i just started using dual core and its only e2180 but i got it stable 3.2ghz@1.425v 32'c idle/63'c load.pretty good to me but what do u guys think.
and im gonna run this 24/7.
|
|
|
|
|
|
hilmiangah
|
Sep 4 2008, 01:01 PM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(kucingfight @ Sep 4 2008, 12:45 PM) w00h00..time to ditch the e2 soon... e5200's selling ....4ghz easy peasy ye la. at rm300 and 45nm its so tempting. |
|
|
|
|
|
hilmiangah
|
Sep 6 2008, 03:33 PM
|
Kongsi Gelap Elite Ramadass
|
its degrading already???
how old is the proc??
try pump more vcore into it maybe the bsod will disappear.
|
|
|
|
|
|
hilmiangah
|
Sep 7 2008, 12:24 AM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(rozz_1291 @ Sep 6 2008, 11:56 PM) Nearly 7-8 months i think...  4got edi how old....  I think I've increase da vcore high enuf edi... 3.50ghz@1.63v  it should be ok... B4 dis, 3.50ghz@1.60v... Then when got dis problem, increase until 1.63v also da same... Now 3.20ghz@ 1.57v.... aisey...   so high ah!!!!! i set my 2180 at 3.2@1.425 je...... maybe its bcoz u pump too much vcore long enough that if u downclock u also need higher vcore to stabilise it.maybe its already damage. |
|
|
|
|
|
hilmiangah
|
Sep 7 2008, 01:36 AM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(tech_frix @ Sep 7 2008, 01:34 AM) lagi low vcore lg bagus.... jimat letrik wooo... normal OCer pun can use what??  second that but i think if u live in a small town like me its hard to get it....... |
|
|
|
|
|
hilmiangah
|
Sep 7 2008, 01:41 AM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(tech_frix @ Sep 7 2008, 01:38 AM) u can used postage boss... try looking around for d proc and buy via post la... 
Added on September 7, 2008, 1:39 amu can used postage boss... try looking around for d proc and buy via post la... true. is there anyone using abit ip35-p mobo??? my oc setting always return to default after a shutdown but the bios setting is still set at oc setting. |
|
|
|
|
|
hilmiangah
|
Sep 7 2008, 04:47 PM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(joe_star @ Sep 7 2008, 09:40 AM) Meaning when you enter windows its default speed? That means your boot at oc settings was not successful, so the mobo automatically loaded defaults . Check with cpu-z, if your FSB is 199mhz then its the safe mode working
Added on September 7, 2008, 9:41 amYeah....most likely your proc degrading ady. Mine still not so bad, just 1 notch extra voltage needed at 3.2ghz (lastime 1.4v now 1.42v) yeah its at 199.but i use my 3.2@1.425 all the time.its just sometime when i on the pc cpuz show the default setting but when i restart it the bios oc setting is unchanged. 
Added on September 7, 2008, 4:48 pmQUOTE(rozz_1291 @ Sep 7 2008, 04:08 PM) My secondary rig is still under progress.... gonna be completed soon. So once finish, maybe i can try out my E2180 on a IP35P mobo...  But, if still da same, i guess there goes my baby... so u have a ip35-p eh.. same board like mine and the only thing i hate about it that it doesnt have oc profile saving feature. This post has been edited by hilmiangah: Sep 7 2008, 04:48 PM |
|
|
|
|
|
hilmiangah
|
Sep 7 2008, 07:58 PM
|
Kongsi Gelap Elite Ramadass
|
what do i need to tweak???
im actually a newbie in ocing.rite now im using 667 ram and i set the divider to run it at 800 speed.bt the problem doesnt happen often but its annoying.
|
|
|
|
|
|
hilmiangah
|
Sep 7 2008, 09:52 PM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(rozz_1291 @ Sep 7 2008, 08:13 PM) Now still using IP35E... maybe after Raya im gonna get da IP35P... Got sum duit Raya...  i dont think there is much difference. even some member prefer the e than the p. even i dont think its a good board. |
|
|
|
|
|
hilmiangah
|
Sep 7 2008, 10:20 PM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(rozz_1291 @ Sep 7 2008, 10:01 PM) Well... if i can find E, than i rather go 4 da E.... But... all i c is IP35P onli... why dont go for the Pro terus. better than both those e and p. and ur 9800gt what brand is it??? what the score for 3dmark06??? |
|
|
|
|
|
hilmiangah
|
Sep 8 2008, 05:41 PM
|
Kongsi Gelap Elite Ramadass
|
i am an abit user.
Abit IP35-P but too bad no profile saving at bios.
|
|
|
|
|
|
hilmiangah
|
Sep 9 2008, 05:31 AM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(cloudstrife07 @ Sep 8 2008, 09:24 PM) hmm, i wonder how much i'll able to OC an E2160 and E2180 if using a stock fan? edit: i saw most of them able to reach more than 3GHz on stock cooling. so my question is, which processor is my best bang of buck in buying?most of the results are leaning toward E2160 my 2180 can run at 3ghz on stock cooler but the temp is around 70'c max but on some benchtest that i run the performance went up more than half.but now im using hyper 212 and running at 3.2.cant go higher coz im afraid to play with voltage. |
|
|
|
|
|
hilmiangah
|
Sep 9 2008, 01:17 PM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(cloudstrife07 @ Sep 9 2008, 01:14 PM) meaning stock multi, and only up the fsb right? however i do hope can reach 3Ghz once i get this proc due to budget/value RAMs... no problem la. im using budget aeneon 667,run my proc at 3.2 and set the divider for the ram to run at 800 no problem at all.its a setting i use everytime. |
|
|
|
|
|
hilmiangah
|
Sep 9 2008, 01:27 PM
|
Kongsi Gelap Elite Ramadass
|
yes more vcore but not too much.
try .5v at a time.
and what mobo didi u use??
and i suppose u have yet to buy the proc rite....
|
|
|
|
|
|
hilmiangah
|
Sep 9 2008, 02:53 PM
|
Kongsi Gelap Elite Ramadass
|
yep e2 series quite good.
just dont expect 4ghz dah la.
|
|
|
|
|
|
hilmiangah
|
Sep 9 2008, 06:14 PM
|
Kongsi Gelap Elite Ramadass
|
i never lower muiltiplier for overclocking and that because i dont know what its for.
is it better for overclocking???
does it stress the cpu or mobo???
|
|
|
|
|
|
hilmiangah
|
Sep 10 2008, 02:44 AM
|
Kongsi Gelap Elite Ramadass
|
QUOTE(coolice @ Sep 9 2008, 09:53 PM) » Click to show Spoiler - click again to hide... « watercooling ya la coolice. what i mean is average user that think wc is a luxury and couldnt afford it and urs is the rare G0.my 2180 M0 barely pass 333x10...... |
|
|
|
|
Quote
0.0476sec
0.72
7 queries
GZIP Disabled