u stress it usimg OCCT ka??
cuz d temp is quite low for orthos...

guys..wanna ask lor....

recently i bought E2160 & Abit iP35-E for 2nd rig to use for my little brother...
thinking wanna OC it....dont know much bout intel...using stoc cooling how far can go?

good choice of a mobo bro..ehu2heu, according my personal experience, I cud go to 347x9 and 387x8 using a stock cooler. both of them used 1.425 as the vcore, 13 hours stable. on idle, it was ermm, I forgot, but on full load, it'd be 68-69c..

On the contrary... I tested both and I found out the temps for Orthos is higher than OCCT.

it all depends on priority being set in orthos.. this is the flexibility given in orthos

la...20s je??
aku dapat at least 18 r...hehehe...u got good cooler there so kaw kaw la OC...

Its really not about the cooler, its about the processor itself. Just imagine a processor to be like a human being, every human being is born with a unique character, same goes for a processor too, it cant be forced.. I guess thats what is happening at the moment.

but maybe he is too worried bout d temp itself...
he's still @3ghz atm..so we need to encourage him to go off d limit!!!

i think we should encourage him rather to get stable temps and workable OC-ed systems. Off-limit is good, but only when he is ready to go, and if he does want to go, we can give him a place in our team

really ar??thx....is it need to put the vcore 1.425v??is it kinda high for an intel?

I don't think 1.425V is high but as long as you take care of the temps, it should be alright.

lol I've did 3.2ghz before, but not stable in both OCCT and Orthos. And my rams also give me a quite a headache can't boot if I OC it anything above 700mhz
maybe someday when i'm already bored with this hardwares, i'll try to pump up the Vcore to 1.5v and Vdimm 2.2v

and @techfrix,
is not the temperature i'm worried about

what should be worry about?
im just using the small stock fan....

hmm..even after i OCed to 3.3ghz I still can't break the 18s barrier hmm.. must be my rams limitation, i think

Yeap, definately your RAMs
Me(E2160) and a1098113(E2140) can do below 19s with 3.2ghz 400x8 but with RAMs working at 1000mhz.

haizz... looks like i have to find HP rams soon

Your proc got good voltage bro...mine hav 2 bump alot massive ammounts...guess it suxx...
Y dun you use devider bro? can push rams higher instead of using 1:1...

This post has been edited by Bigblock: Mar 15 2008, 08:47 PM

oh well, i guess not all e2 series are as good as it was.. coz of its dominance in the market and its OCbility. So Intel dont create good chips anymore...

Your RAM not enuff high freq and the timing very loose..

My E2160 @ 3510Mhz can do 17.9s .. Ram not good ..

This post has been edited by Amedion: Mar 15 2008, 08:50 PM

17.9s is pretty slow for 3.51Ghz bro. How much can you tighten on your ram timings as it goes higher.. with team elites, i think u should be able to do 5-5-5-12 easily and also 1100Mhz..