anyone have the source for battery life indicator/monitoring - > % ..etc ?

try to perform Ziphone again and it should work after that.
you're in 1.1.4 ?

Tried BossPrefv1.56 but still ian't turn off the EDGE.
It turn off for the 1st time then after few second it turn back on.

Any other more effective ways to turn the EDGE off ?

if permanent turn off EDGE by calling maxis is ian't a problem but MMS cannot play leh right ?

So for those who want to recieved and send MMS definately need to turn on the GPRS/EDGE by maxis.

So by simple key in the wrong setting will disable the EDGE but still the E icon will appear.

MMS setting,

MMSC : http://172.16.74.100:10021/mmsc > Proxy : 202.75.133.49

APN (net) > Username (maxis) > Password (wap)

those using 3G sim card, set APN = unet

---

Added on March 11, 2008, 6:56 pmsaw the website but by using 1.1.4 firmware.
i cannot locate the iphone app/directory using iphonebrower.

is there any other alternative ways to access to the iphone directory so the battery.app can be import in it.




This post has been edited by soundstream: Mar 11 2008, 06:56 PM

sorry newbie here. install WinScp but ain't know how to use la.
heehee. so i try to add the treja.com/projects/ipod/#battery to installer but no response even refresh couple times.

anyone know where it goes wrong ?

had put in trejan.com/irepo in the sources but did not come out at installer side.
anyidea why ?

gheee you guys used up at least 80% of the 8GB. does the phone like lag a while especially when open the sms ?

i only utilize about 30% and sometimes i felt lag when opening sms..

anyone know what's the issue here?

on 1.1.4 ,


for forward sms, tried above source.

wetool not support
SMSD support but dono why c no changes after reboot
iSMS support but dono why c no changes after reboot



How about delete the individual call by call list ?

This post has been edited by soundstream: Mar 13 2008, 06:41 PM

Hi guys,

had try on below instruction on Winscp but

iphone connect via usb to pc
iphone on ssh / wireless WIFIed

Step 3b: FTP Client
1. Download any ftp client that supports SSH (Eg: CuteFTP Pro)
2. Start the CuteFTP Pro -> File -> New -> SFTP (SSH2) Sites
3. Enter your iPhone ip address at the HostName field.
4. Enter username as "root".
5. Enter password as "alpine" (for newer release) or "dottie" (for earlier release).
6. Click on Type tab. Make sure SFTP (SSH2) is selected as protocol type and Port 22.
7. Click connect at the bottom left of the menus.
8. Proceed browsing your files.


when we select the file protocol to SFTP then check beside box
what to put on private key file ?

i failed to login in still.

anyone can spare me some correct wayz ?

brother,

swirly mms v0.3.6 lo.
add this source to your installer.

twenty08.com/installer

any helper ?

anyone do face problem on MMS in/out ? Awiz failed to fetch in/out mms.

Anyone can help ?

what is the setting user name/password/.... for WINSCP then ?

i try many times but failed to log in..