HI guys... just wanna know must i pass all the benchmark test ot determine if the systems is stable?

Recently i've overclocked my pc.. but Memtest says my RAM is ok and EVEREST says ok for CPU and RAM.. but when i run ORTHOS it fails in the first few seconds
So please gimme any suggestions on this matter..

I try upload EVEREST cache test for you to see.. Thank you

try run any of ur application & see
got problem or not

if not pass..how come u wanna use as daily

ORTHOS fail = Your OC also fail
try hard

i dont agree with hafiz, Orthos failing doesnt mean OC fail. Orthos have issues too. And if u do check around, u will see various instances, where Orthos is unreliable.

To TS, i would suggest you try Super Pi 32M and see if it can pass, then try OCCT for 30 minutes. Should be alright.

Orthos sometimes is real headache..

Passed OCCT 6 hours, Prime95 6 hours, SuperPi 32m few times and run my rig for a week without problem.. Orthos fail in 1 minute time.. WTF?

Need to run ur proc so torture everyday?
make it around 3.4 or 3.5ghz are enough,
3.6ghz above are already hard for E6750 unless u got a gem...

like my 2nd rig,
even can stable at 3.8ghz,
but i still put it at 3.2ghz for daily usage,
dun wana over torture it with the voltage.

If no random bsod then ok already after OCCT,SPI 32m.

don't forget some serious gaming or prime95

This post has been edited by IcEMoCHa: Mar 3 2008, 10:14 PM

Yes I agree, orthos can be quite weird. At the same time, I've had OCs that were orthos stable for 12 hours but cause problems after about an hour of intense gaming. So try the alternatives, and most importantly, real world scenarios 1st