Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

Technical Compatible Routers for PS3, share info and tips here

views
     
shahreza2000
post Nov 15 2009, 09:27 PM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(O-haiyo @ Nov 15 2009, 02:01 PM)
auto??
*
If u set the modem to pppoe, u can set auto connection on ps3...
shahreza2000
post Nov 24 2009, 04:39 PM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(enriquelee @ Nov 24 2009, 04:21 PM)
I am having 80710102 error too. ANybody can help to resolve this problem.
My PS3 firmware is still 3.01, or i must update to 3.10 in order to connect to internet?
I used to be able to connect to internet, but now i can't. There is no change of setting neither on my PS3 or modem router.
When i do connection test, my PS3 failed to obtain IP adress.

Anybody have experienced the same problem here? Or know the solution for this problem.
All helps are very much appreciated. Thank you
*
means that ur ps3 cant connect to the router... conflict ip address perhaps?
shahreza2000
post Nov 25 2009, 09:01 AM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(enriquelee @ Nov 25 2009, 08:45 AM)
If it is conflict IP address, how can i resolve this problem?
*
can you restart the modem/router?
shahreza2000
post Nov 25 2009, 03:27 PM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(OrientalDelights @ Nov 25 2009, 03:10 PM)
I'm using P1 and i've set up my router.
I tried connect to it using wifi but it cant. It says DNS error, my laptop and psp also cant connect. What's the prob ?
*
How do u set up router? auto config? what model is your router?

the prob is the router block the connections of those devices, maybe router have incorrect settings?
shahreza2000
post Nov 25 2009, 05:14 PM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(OrientalDelights @ Nov 25 2009, 04:54 PM)
I think its the router incorrect settings.
Nope, my friend helped me out.
When i used my bro's laptop to connect, it shows 2 of the same connection, eg : mizer and mizer_1 but cant go online
*
maybe u can try direct connection 1st... to see if p1 modem working... if not ok, power down the modem and restart...
shahreza2000
post Nov 25 2009, 06:53 PM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(KakiGamer69 @ Nov 25 2009, 06:13 PM)
Sorry newb question. How to check ur NAT type in PS3?
*
at XMB, browse under Settings > Network Settings > Settings and Connection Status List


shahreza2000
post Nov 25 2009, 10:55 PM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(OrientalDelights @ Nov 25 2009, 10:51 PM)
Hmm.. but how can i connect few devices to the p1 ?
Someone told me network switch, and how much is it ?
*
what router model u have?

have u considered disabling firewall in router?
shahreza2000
post Dec 9 2009, 12:11 AM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(ecVk @ Dec 7 2009, 10:29 PM)
Guys, when i go for internet connection test my UPnP says it is not available. And my PlayStationNetwork couldnt be connected. Can somebody teach me how to solve this problem?  My router model is Linksys WAG54G2. sad.gif
*
That router model has issue on UPNP.

Solution:
Set PS3 ip address as static (outside DHCP range to avoid conflicts)
Then open ports for ps3 (Applications and Gaming > Single Port Forwarding)
Set PS3 as the DMZ host (Applications and Gaming > DMZ).

shahreza2000
post Dec 14 2009, 09:32 PM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(quackers @ Dec 14 2009, 07:08 PM)
will an Aztech modem and router work?
*
any adsl modem + router = always work

usually if connection failed, is due to firewall in the router settings
shahreza2000
post Dec 15 2009, 12:27 AM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(kezman @ Dec 14 2009, 09:38 PM)
im using dir-300, can connect to internet and PSN, and can play online for game such as LBP, FIFA, but not MW2...why??

i try use wired, but everytime i enter my PPPoE setting, my username and password, an error state that my username or pass is wrong, why?im sure they r both correct as i have try to login to streamyx page....
*
user posted image

ur config like this above?
shahreza2000
post Dec 15 2009, 10:47 AM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(the_wrath @ Dec 15 2009, 02:52 AM)
noob here..just got my ps3 a few days ago..
my set up is like
"phone jack--> adsl modem--> ps3"
after setting up my network connection setting on the ps3...i got "DNS ERROR"
what is a "DNS" & how do i check if its wrong?
*
Is ur modem auto-dial?

if not, u can set PPPoE connection in PS3 network settings (require streamyx user id and password)

This post has been edited by shahreza2000: Dec 15 2009, 10:48 AM
shahreza2000
post Dec 15 2009, 01:21 PM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(Felixlynch777 @ Dec 15 2009, 01:15 PM)
Hey guys I need some advice. Right now my ISP is TMNET and I use their RM99 a month 1MBPS. Most games work ok online but I I can afford better so I'm upgrading to 2MBPS. I just want to know will it mess up my PS3 settings if you upgrade speeds. Thanks for all advice given.
*
if upgrade speeds, no worries... its intact.. icon_rolleyes.gif
shahreza2000
post Dec 30 2009, 01:32 AM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(gavind87 @ Dec 29 2009, 07:52 PM)
Hello gents ,
  Everytime I enable my PS3 media server . It will immediately say , the " The PS3 has been disconnected from the media server " . After that , all internet connection is lost and the internet disconnects on my router .

I've no idea why this is happening and I hope you guys have some clue as to whats going on

I'm using a wireless connection from my PS3 Phat , to a WRT54G
*
what firmware is your linksys router? coz that model has issue on upnp and media server...
shahreza2000
post Jan 28 2010, 04:26 PM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(boardgamer @ Jan 26 2010, 12:33 AM)
Has anyone tried more than 1 ps3 playing online side by side ?
*
no prob... its fine so far... 2-3 ps3 using 1mb streamyx line... minimal lag when playing kz2


Added on January 28, 2010, 4:29 pm
QUOTE(rockstar_ @ Jan 28 2010, 04:22 PM)
guys, i got problem playing codmw2 multiplayer.. cannot find a single game.. but codmw can connect and play.. what problem exactly? i alrdy set DMZ to my PS3 and set static ip to my PS3.. still cannot connect... sad.gif
*
what modem/router u use? what broadband service do you subscribed?

do you set static ip outside dhcp range?

what ports did u enable?

if you do ps3 network test what's the outcome? NAT-type?

This post has been edited by shahreza2000: Jan 28 2010, 04:29 PM
shahreza2000
post Jan 28 2010, 05:19 PM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(rockstar_ @ Jan 28 2010, 05:06 PM)
i think riger.. i use streamyx 1mb.. static ip is in range and i can browse internet from my ps3.. when i test connection got NAT type-2.. but when i try to run MW2, it shows NAT strict.. i play CODMW before and no problem but when want to play CODMW2 cannot..
*
can u disable firewall? and try to see whether u still got NAT strict...
shahreza2000
post Feb 10 2010, 06:01 PM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(Felixlynch777 @ Feb 10 2010, 03:59 PM)
Hey guys I just recently upgraded to 4MBPS but Streamyx replaced my TMNET router and TP-Link wireless modem with their own Riger DB-108 wireless modem. For some reason my NAT type is Type 2 moderate, even though shouldn't it be Type 1 open? Before I had my upgrade done it was type 1 open. If I try to enable UpnP it says it is unavailable.

Is there anyway to change the NAT to type 1 by enabling UpnP? Or is it not needed to be type 1 open. I tested it on MW2 on Monday and it worked very well, but I would prefer type 1 so all help is appreciated. Thank you
*
NAT-type 1 can be only be achieved when there's a direct connection i.e. no router involved - straight to modem

if got router, then NAT-type 2 is the best

avoid NAT-type 3 at all cost because connection to the internet is very limited... hence it might be due to hardware firewall

MW2 need certain ports to open, so its best to try to disable router firewall and test the game online.

From there on, we can see what ports needed/required for the game to run flawlessly
shahreza2000
post Mar 14 2010, 03:38 AM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(ShuUemura @ Mar 13 2010, 11:25 PM)
I really hate IP fragments issues.. Even tho i got Nat type 2, i sometimes have problem connecting to servers or room. Geez...
*
if got issues with fragment issues, try adjusting MTU within ps3 network settings... try play around from 1470-1486...
shahreza2000
post Apr 3 2010, 12:23 AM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(ShuUemura @ Mar 15 2010, 02:44 AM)
mmmmmm. MTU on PS3? or both PS3 and router? Mine router is 1492
*
my router set MTU at 1492

ps3 is set at MTU 1480


Added on April 3, 2010, 12:24 am
QUOTE(don8ld @ Apr 3 2010, 12:01 AM)
Hi guys, was wondering what router should I get.My wireless signal for my PS3 is in between 5-15%
*
wah under 20pc, pretty bad... what router brand did u had?

This post has been edited by shahreza2000: Apr 3 2010, 12:24 AM
shahreza2000
post Apr 10 2010, 08:44 PM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(twentyninesix @ Apr 6 2010, 04:20 PM)
guys,, can suggest me any good wired router? now wan play ps3 online oso hard..my sis/bro bising want to use internet also.. haiz.. sad.gif
*
any branded router would do.... also take consideration on your broadband speed at home (need to upgrade perhaps?) hmm.gif


Added on April 10, 2010, 8:45 pm
QUOTE(tashfinsheikh @ Apr 10 2010, 06:58 PM)
Which router should I buy ?
Any help would be appreciated.
I am looking to buy Linksys router that can get NAT 1 or NAT 2 and wireless.
*
what model r u looking into? do research 1st whether it has firmware probs etc...

This post has been edited by shahreza2000: Apr 10 2010, 08:45 PM
shahreza2000
post Apr 11 2010, 01:25 AM

Getting Started
**
Junior Member
62 posts

Joined: Sep 2004
From: Ampang


QUOTE(tashfinsheikh @ Apr 11 2010, 12:20 AM)
What router are you using ?
And your comments about your router icon_idea.gif
*
i'm using Belkin N Wireless Router model F5D8233-4... both wired/wireless function very well...(default fw)

previously used a Dlink ADSL Router DSL-G604T as a router (now turned into adsl modem to connect to the above router)

i also have handled Linksys WRT54G which is a hassle, wireless kept dc (probably due to fw issue)

3 Pages < 1 2 3 >Top
 

Change to:
| Lo-Fi Version
0.0352sec    0.55    7 queries    GZIP Disabled
Time is now: 2nd December 2025 - 10:18 PM