how much is it?
i heard some good comments before, compare to biostar TA780G
but not really sure about the oc-ability
have to search around for review or dl the manual,
check for the max vcore & vdimm supported

how much is it?
more than RM 290 = not worthy
how long it would take if i wanna claim for warranty?
OCZ products seem rare in local market

@sempronic

phenom is B2 , Brisbane is G1 & G2
AFAIK , B3 stepping doesn't guarantee oc ability improvement.
It solves TLB errata issue only

That is not true, my friend
As what i know, TLB errata is microcode error at part of the L3 cache
The TLB patch is just a temporarily solution, it covers the error parts and that's why it cause performance decrement. ( Part of the L3 cache removed from user usage)
AMD promise to fix the TLB errata by reprogram the microcode.
That is why B3 stepping is known as TLB errata free

super pi chinese version ?
no wonder so familiar, it's from itocp.com
kinda uncompleted review , the VR-Zone 1.
I try to search around, let's see whether can get OCed result for that review

OT: itocp.com sucks , their core overclockers only know how to achieve high in cpu-z validation ( that's brainless and skilless oc)
OS Tweaks, ram timings tweaks , other secret benching skills ? Sorry they don't know and don't wanna know at all
sorry to say but they are lame

Just look for the actual review from them
and what the heck, no oc results
this is what i got , stock speed comparison between 4400 , 6400 and 8600

haha, don't blame them
Those are ITOCP overclockers
they won't know why have to compare in such way 1
haha, sorry.. i don't like them

That's long story
I believe that we all are same,
we love to make friend with humble/gentle guys/overclockers

oc result, as reference
420HTT achieved on TA780G

welcome
nope, that's what I've got for now .
Will post again if i get any further update

use benchmarking softwares to figure it out

i did 1320MHz b4, single channel
but quite unstable already at that speed


@-pws-
what's the trfc value when u tried 1300MHz?

2.6v

That's TA770 A2+ , mobo detail is shown in the SS
TA690G max vdimm is 2.6v
wait a min, you're using TA690G also right ?

my ram can only do 1200 at 2.1v

ram killer
1) high voltage
2) overheat
3) tight timings+ high frequency

always active cool the ram so that it can stay healthy

I've read some users' feedback.
That mobo can't oc well

need some time to dig them out
btw, what i've seen are ONDA A78GT's oc results.
ONDA A78GT is oem mobo from J&W

ABIT AX78 is amd 770/SB600 chipset based if you guys notice
it doesn't support hybrid CF as it's not AMD 780 chipset

http://www.abit.com.tw/page/en/motherboard...TYPE=Socket+AM2

you didn't change the memory divider yet
it's 800 divider now, try to lower it to 533 or 400
and i realized that you're using 10x multiplier.
you can use higher cpu multiplier right?

nice rig you got there
may i know what's the maximum vcore & vdimm in bios ?
mind to check for me? thanks
and what's ur ram?

p/s: you can upload ur pic directly in LYN forum , by using the attachments function