Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
5 Pages < 1 2 3 4 > » Bottom

Outline · [ Standard ] · Linear+

 AMDŽ Socket-AM2/AM2+ Overclocking thread (V6), Will AMD alive??

views
     
cracksys
post Feb 22 2008, 10:11 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(xixo_12 @ Feb 22 2008, 09:01 PM)
no need to sacrifice speed.. sacrifice the money.. brows.gif
*
if got no money ?? sweat.gif

QUOTE(ah_khoo @ Feb 22 2008, 09:05 PM)
[attachmentid=402788]
5mhz more to go...  icon_question.gif
*
nice one ..

i'm going to update my oc soon ... doing some systematic analysis now laugh.gif

@digswell - update on rebel haven modded bios plz ... notworthy.gif

@sifu-s out there - is there any way to identify which (ram or proc) holding back an oc??

This post has been edited by cracksys: Feb 22 2008, 10:17 PM
cracksys
post Feb 22 2008, 10:20 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(xixo_12 @ Feb 22 2008, 10:18 PM)
oc one by one la
*
i've tried ... (acording to my own understanding) and i record each setup .. but there seems to be an unseen force holding back my oc ... shocking.gif
cracksys
post Feb 22 2008, 10:25 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(alive88 @ Feb 22 2008, 10:21 PM)
guys..i need money.. sad.gif
please proceed to this thread
http://forum.lowyat.net/topic/636801
*
wave.gif hope to see you again rclxms.gif
cracksys
post Feb 22 2008, 10:35 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(xixo_12 @ Feb 22 2008, 10:28 PM)
r u sure?? how far ur proc can go??
*
here is a lowdown of what's in my record

using stock - 278x10.5 stable, 279*10.5 error
1.33v - 278x10.5 stable, 279*10.5 error oso
1.38v - 279*10.5 stable, 280*10.5 error

hmm.gif its seem that increment in voltage doesnt support htt more than 280

this isnt complete, i'll post some ss tomorow
cracksys
post Feb 23 2008, 11:51 AM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(byfc2010 @ Feb 22 2008, 11:01 PM)
wif ur mobo...sounds impossible to hit the fsb wall so fast la...
ur proc reach limit d gua...
reaching limit on stock volt... rclxub.gif
ur ram...got lower ram spd 1st or not...
*
i tried lowering my ram divider to 400 from 533 .. and guess what .. i could actually up my HTT sumore

upped 1Mhz of HTT - orthos stable
upped 2Mhz of HTT - orthos fail edi shocking.gif

QUOTE(jackdante22 @ Feb 23 2008, 09:58 AM)
Run super pi 32m only. Not yet test with orthos blend test with that speed. I wonder does super pi 32m = orthos blend test? hmm.gif
Which one is better in term of long term stability?
*
in most of my oc testing, i was able to get 2 superPI running back to back succesfully but when i start orthos ... 5 minute and edi failed doh.gif

Added on February 23, 2008, 12:25 pm
QUOTE(digswell @ Feb 22 2008, 10:53 PM)
feeling same with last bios . rolleyes.gif ...maybe is for fix the 5000+Be proc problem flex.gif
will try to oc a bit ...see wat  different is hmm.gif
*
hmm ... any new option ??
i saw t-sumthing option added in t690 modded bios ... going to try out

This post has been edited by cracksys: Feb 23 2008, 12:25 PM
cracksys
post Feb 23 2008, 12:46 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(digswell @ Feb 23 2008, 12:42 PM)
@bro cracksys
i using biostar TA770A2+ mobo
*
i know ... just need sumone to test those modded bios first tongue.gif
i dont have courage to jump first sad.gif
cracksys
post Feb 23 2008, 08:15 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
sad.gif i maybe hit my proc limit edi

Attached Image

give me some thought .. black dot indicate windows hang or completely unbootable
cracksys
post Feb 23 2008, 08:47 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(joe_star @ Feb 23 2008, 08:39 PM)
I think you can still further increase your core voltages smile.gif
*
emm .. i think of that edi and tried 1.4 ... the voltage increment does not support any increase in clock .. if any oni 5-10Mhz
cracksys
post Feb 24 2008, 10:14 AM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(-pWs- @ Feb 24 2008, 01:00 AM)
Database Updated  rclxm9.gif  rclxm9.gif

Please PM me if I left out someone.
Thanks

-pWs-
*
thanks bro -pWs- .. it feels great to be in there nod.gif

Added on February 24, 2008, 10:16 am
@digswell
as my proc hit the wall edi ... i wonder what if i enable e&q .. does it downclock my proc to stock when i'm gaming or it increase it to 2.92ghz ??

This post has been edited by cracksys: Feb 24 2008, 10:18 AM
cracksys
post Feb 24 2008, 12:14 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(joe_star @ Feb 24 2008, 11:15 AM)
I dont think AMD C n Q will work properly with your overclocked proc as you have raised the voltages, while C n Q operates with stock voltages. Use crystal cpu ID. With it you can set the proc to operate at lowest possible voltage n multiplier at idle to save on electricity and heat and set it to your required oc levels for gaming and other stuff. It works to adjust the settings automatically just like C n Q smile.gif
*
QUOTE(digswell @ Feb 24 2008, 11:26 AM)
depend ....my dont hv any probelm with it
*
thanks ... i'll try crystal cid. i've tried enabling C&Q at 2.92ghz@stock voltage and i got BSOD, wth shakehead.gif

Added on February 24, 2008, 12:16 pm
QUOTE(temptation1314 @ Feb 24 2008, 12:14 PM)
Eh, bro skalian, I try OC my TA690 go beyond 270-280 FSB, during bios startup got one message "....running at stock value, please configure..." tongue.gif sweat.gif forget... But when that message pop up and i insist to proceed to windows, the FSB back to 200 even thou I set 270 or 280 @ bios...

But now I tested with 280FSB stable already sleep.gif I wonder why ler?
*
i got that one too sometime (along with blipping red led) ... i reboot after that and then my ta690g acted like nothing happen laugh.gif

This post has been edited by cracksys: Feb 24 2008, 12:16 PM
cracksys
post Feb 24 2008, 12:20 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(mois @ Feb 24 2008, 12:16 PM)
bro, cant boot..lol..vcore 1.334..
vdimm 2.0..
multiplier 11
5-5-5-15
speed 230..cant.. cry.gif
*
werd ...
what's ur ht link ?? my brisby could go 292*10 without vcore increment

try loosen those last number in ur timing ... 15 --> ++

@ah_khoo - notworthy.gif

This post has been edited by cracksys: Feb 24 2008, 12:22 PM
cracksys
post Feb 24 2008, 12:25 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(mois @ Feb 24 2008, 12:22 PM)
i wonder wad is HT link...i dont change that thing...
*
its the 1x - 5x setting in ur bios ... find it and change it to 3x
i dont know what it is actually but mine cannot use 5x (cannot over 1000Mhz)
cracksys
post Feb 24 2008, 02:20 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(xixo_12 @ Feb 24 2008, 12:28 PM)
cannot, why?? weird
*
i dont know why .. last time i test, i use 4x with htt 290mhz and its blipping red led on my mobo
after that, didnt dare to try sweat.gif

but werdness doesnt stop there ... my brisby can go up to 2.92 GHz stable using stock VCore ... but add vcore to 1.42 summore, cannot go pass 2.95GHz tongue.gif

** ps : hard to reset bios .. need to take my GC off shakehead.gif

This post has been edited by cracksys: Feb 24 2008, 02:25 PM
cracksys
post Feb 24 2008, 08:17 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(-pWs- @ Feb 24 2008, 03:54 PM)
Ops...everyone Vcore drop when load.
How come my setup difference? DFI pattern laugh.gif

-pWs-
*
bro .. same la .. but mine drop and oso increase nod.gif
biostar pattern tongue.gif
QUOTE(za_az @ Feb 24 2008, 06:09 PM)
Thanks notworthy.gif Might try vcore at 1.6v tonight and see how it goes brows.gif
I think u need to attach SS of orthos > 1hour or SuperPi 32M for ur result to be updated thumbup.gif
*
wooo sweat.gif 1.6v ha .. shocking.gif
bro amedion might feel challenged laugh.gif

Added on February 24, 2008, 8:21 pm
QUOTE(mois @ Feb 24 2008, 08:02 PM)
just finished test it...sad the speed quite slow..
i tried 235*11...but cant boot with the same vcore..
vdimm 2v.. cry.gif
*
decrease ur HT link multiplier to 3x ..
in my case .. it helped.. a LOT rclxms.gif

This post has been edited by cracksys: Feb 24 2008, 08:21 PM
cracksys
post Feb 24 2008, 09:42 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(digswell @ Feb 24 2008, 09:30 PM)
hello nid u guy advice bout tis

Few time try do oc my 4200 f2 ....at speed 310 x10 ..Boot starup bios ok can see the startup windows.. after tat it stop at startup windows ..no hdd active

oledi try vcore from 1.425 to 1.525....vdimm 2.2 or 2.3 oso cannot even with losen timing and divider
but still fail

any guy know wat i nid to do ???

i read somewhere that high HTT could lead to corrupted harddisk and oso, artifact in display
why dont u go with higher multiplier bro ??
cracksys
post Feb 24 2008, 10:16 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(digswell @ Feb 24 2008, 09:44 PM)
thats why not got ppl try as high like tis...so i going to try it

Added on February 24, 2008, 9:51 pm
try b4 with 290 x11 ...but nid vcore bout 1.5 to 1.6....every stressing fail
then i try at 300 x10 ....all stressing pass
so i try i 310...it fail to boot into windows
i no think high HTT cannot boot into windows ..
i saw db bro f3 oc ss post with tis ta770..
htt can do at 370 and HT link can do 1800
*
i'm a believer in slow oc laugh.gif not that it exist or what
try 306, 308 first and see the result ... oso, try lowering ur ram divider which i know u wouldnt nod.gif

aeneon ddr2 800mhz ?? that one that claimed can reached to 1200mhz ha bro ?? i need to get one of those drool.gif
cracksys
post Feb 25 2008, 10:29 AM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(FuiLo @ Feb 25 2008, 01:27 AM)
Bro where u read those information?coz currently wif my setup HTT is running at 1114Mhz mean it is too high or?when i was playing Hellgate London there are a lot of artifacts..could it be the HTT porblem? hmm.gif
*
err .. what ur clock speed, 111.14Ghz ?? laugh.gif
HTT = intel FSB ( notworthy.gif -pWs-)

example HTT (220Mhz) * multiplier (10) = clock (2.2Ghz)

by the way, i read those in Rebel Haven forum icon_rolleyes.gif
cracksys
post Feb 25 2008, 10:58 AM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(digswell @ Feb 25 2008, 10:40 AM)
Rebel Haven Forum is very good forum for we all wan to learn..
bro cracksys learning very fast from there too
*
some of the article maybe outdated but .. current flow never changed nod.gif

QUOTE(hengmy @ Feb 25 2008, 10:48 AM)
here is the links http://www.tomshardware.com/2007/10/22/bud...cker/page5.html
got 1 more review but cant find it now mad.gif
*
now i know why people want unlocked multiplier doh.gif silly me
cracksys
post Feb 25 2008, 11:03 AM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
hahaha .. they called 3 loop of prime95 as "stable operation" laugh.gif .. n we here need to do orthos 1 hour to satisfy bro -pWs-
cracksys
post Feb 25 2008, 11:10 AM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(za_az @ Feb 25 2008, 11:05 AM)
Can always use SuperPi 32M if dun wanna use Orthos thumbup.gif
*
i use ..

superPI = gaining the top spot in bro -pWs- table icon_idea.gif
Orthos = to test stable or not .. dun wan to hang while pawning people in cod4 laugh.gif
QUOTE(digswell @ Feb 25 2008, 11:05 AM)
1 of the problem might bcoz Tenage Nasional Eletricity make PSU voltage up and down
try to check ur power electricty is hv much volt when u using ur pc ..and other like adcord television etc...
i am sure sometime will drop below 220w...
*
damn TNB

sign0014.gif noted .. in a college with 3000 students, i think this may be the case
« Next Oldest · Overclockers United · Next Newest »
 

5 Pages < 1 2 3 4 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0447sec    0.83    7 queries    GZIP Disabled
Time is now: 7th December 2025 - 11:27 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.