yalo, how much? looking for something with a little bling too.

My latest oc.





Could do the same speed with 4-5-4 timings but that needed higher vdimm so ill settle with this setting for now.

(refer to my new oc below a few posts instead. tq)

This post has been edited by awh85: Mar 15 2008, 01:40 AM

previously i had 5-5-5-5-x but sked too tight timings will kill my ram. got such thing? lol

ok thanks. will give it a go later on. tempted to give CL4 timings another go but the vdimm required is .

added : now im using a safer vdimm of 2.01-2.05 only.

---

Added on March 15, 2008, 12:40 amadded : now i can get it a 5-5-5-5-11 2T but had to loosen my MAL to 11. TRFC is at 105. testing for stability now.

This post has been edited by awh85: Mar 15 2008, 12:40 AM

from i start learn oc till now, i couldnt figure out how to change my multiplier from the default 9.5

btw, why would i want to run lower speed?

maybe u can wait for the pros to answer u about mal, i also simply tweak only until can work.

This post has been edited by awh85: Mar 15 2008, 12:46 AM

oh, never knew about that coz my normal thinking would be if tight kenot, then lagi tight sure kenot lol

maybe my trfc i need to change to 127.5 also, coz now at 105 i feel the ram is not cool at all. any side effects if i change to 195 or 3xx?

added the changed i did just now



This post has been edited by awh85: Mar 15 2008, 01:09 AM

actually my OC i always target 24/7 usage one. dun have any form of active cooling here. just have some cheap heatspreaders only.

(btw, are the heatspreaders for absorbing the heat or what?)

will try tightening the mal and trfc now. =D

icic, will look into active cooling then

my mal value i changed to 6 in the bios and can post, but once i changed trfc to 75 from 105 then cant post. lowered MAL to 5 then can already.

but according to memset here, my mal value is 8, but i set it as 5 in the bios.

which one is correct? or did the bios auto adjust for me or something?



btw, is my ram considered safe?

This post has been edited by awh85: Mar 15 2008, 01:30 AM

icic, so right now its 8 which i assume is auto/bug problem but its preferred to 6ns which not be suitable. so, ill just leave my settings like this then. thanks lots =D

thanks for the screenshot. i can now lower my vdimm (1.95 too) with the help of it, but had to loosen the tras and trc though. lower some timings for lower vdimm is very worth for me. now test stability.

hope to break 1000mhz soon too (which i know should be easy, but my stupid cpu cant go higher coz cooling )

my super pi 1m (which i feel is very cacat coz saw in the database there got ppl get less than 25seconds.



32.484 | x2 3600 | G1 | 2850MHz | awh85 | TA690G | Crucial Value (D9GMH) | 950Mhz | 5-5-5-15-21-2T | Stock Cooler.

(just added details)

edit again coz type wrong

This post has been edited by awh85: Mar 15 2008, 03:30 PM

i just forgot after i posted then added already. sorry ya.