1MB L2 cache really awesome
even if i use full tweak on my X23800+ also cannot get that result at the same clockspeed

Just typo i guess, no way it can clocked at 3.2G

edited: come on xixo, break in 22s zone

This post has been edited by dblooi: Mar 12 2008, 09:56 PM

congrats
nice results you got there

This post has been edited by dblooi: Mar 13 2008, 11:13 AM

need 32M or orthos 1hr result in order to be updated

@awh85
Looking for cheap performance cooler? i got secret stock coming soon
stay tune
can discuss tru pm if interested

xigmatek?
basically we can expect cooling performance better than S1283 , price cheaper than S963
That's all about this cooler from me , in this thread
anything discuss tru pm

tRC can set to 11, no problem for D9GMH

Just some of my experiences sharing.
When you're stuck at ram oc on D9GMH,
Don't think of loosing the timings only,
Try to tight the timings if loosing the timings fails you
D9GMH has unique characteristic, it loves to be tighten.
(eg. MAL changes to 6ns instead of using 10ns, 10ns is too loose for D9GMH actually )
Also, make sure the ram is as cool as possible.
I have this experience, i can use my ram at 1266MHz 5-5-4-3-2T when it's fresh and cool,
but once it's getting hot , i need to change my tRFC value to 127.5NS in order to work stably.

trfc sticks to 75NS always for D9GMH
try to active cool the ram when performing ram oc

remember this,
ram killer = overheat , overvoltage , tight timings + high frequency
my advise is try to get a ram cooler if u plan to oc for 24/7 usage.
Most of the heatspreaders don't work well actually ,
even it is working well, at the end you need active cooling as well.

the memset one is correct.
i guess it is bios bug, the MAL setting is not working eventhough you already set it
Try to flash bios if u willing to set it in bios ( but i'm not sure whether they fix it in later bios or not)
oh ya, don't use MAL 6ns for long term, i got bad feeling if u do so
IMHO, the MAL just leave it as auto should be fine.
TA690G's bios is D9GMH-friendly