Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 [WTA] What is the maximum voltage and timing, for my HyperX 5400 1 GB kit? (512X2)

views
     
Amedion
post Feb 17 2008, 02:45 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
QUOTE(GeneJin @ Feb 17 2008, 02:42 PM)
As the above mentioned, what is the maximum voltage or timing that i can try to push without fyring them? Thanks in advance, new in OC and would like to try.

BTW i'm using Gigabyte GA-8I915G Duo, not sure how far i can go. Currently running on a P4 640 Prescott 3.2. Thanks for advice.
*
Check your RAM's box ... Higher than what voltage void warranty?

I use value RAM all put 2.1v also no problem.. I guess performance 2.2v consider ok..
Amedion
post Feb 17 2008, 02:51 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
QUOTE(GeneJin @ Feb 17 2008, 02:48 PM)
http://processorfinder.intel.com/details.aspx?sSpec=SL7Z8

Some info i got of the intel website about my proc.

http://www.gigabyte.com.tw/Products/Mother...?ProductID=1856

My Mobo info.

Added on February 17, 2008, 2:49 pm

erm.. box? lolz.. dunno go where liao, bought this ram like 2-3 years ago and never OC before.. wasted.. tongue.gif
*
I think HyperX can clock higher without adjusting vdimm .. Try clock higher first lar..
IF PC restart or hang.. Then increase 0.1v.. What is the current vdimm? 1.80v?
Amedion
post Feb 17 2008, 02:59 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
QUOTE(GeneJin @ Feb 17 2008, 02:57 PM)
Problem is, i dunno how to clock higher, using bios or using software? lolz.. i'm newbie, bought a performance ram but dunno how to utilise. I'm only running at 333 now, very very sad. lolz..
*
Oh... Haha.. I don't know much about PEntium 4 .. Long time din use already..

Want increase voltage must go through BIOS ..

Download some overclock tools first :-
- CPU-z
- Everest
- ClockGen
- Memset
- Prime95
- Orthos

What else ? sweat.gif
Amedion
post Feb 17 2008, 04:08 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
QUOTE(GeneJin @ Feb 17 2008, 03:14 PM)
Which 1 should i be using to tweak my RAM clock?? lolz..
*
All also must use .. laugh.gif

Everest to monitor everything..
Clockgen to adjust ur clockspeed ...
Memset to adjust the timing..
Prime95/Orthos to do stressing..
Supermod PI to check if ur RAM stable..

Open Everest, Clockgen and memset ..
Then open prime95 or orthos .. Run the CPU & RAM stress..
Watch the Everest's table .. Wait till CPU Utilization & RAM Utilization at 100%..
Use Clockgen to increase the clockspeed by 3 or 5 whichever u like but not so much..
IF PC hang or restart .. then u need to add vcore, vdimm or change timing..
Long way to go man.. smile.gif
« Next Oldest · Overclockers United · Next Newest »
 

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0152sec    0.36    6 queries    GZIP Disabled
Time is now: 2nd December 2025 - 10:56 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.