YEAH IT SEEMS THAT IT HARDS TO GET A 2ND HAND FULL TOWER CASE
(if anyone wanna let go their lian li or silverstone tj07 do drop me a pm thank)

THINKING OF TO TRANSFORM THIS 3 TIER RACK INTO A FULLY CUSTOMIZE CASE

ANYONE HAVE ANY IDEA HOW TO CUSTOMIZE THIS

THINGS TO FIT INTO:

1X ATX MOBO
1X PSU
3X HDD PREFER 90 DEGREE POSITION
1X PCI-E GC
1X DVD PREFER 90 DEGREE POSITION
1X DUAL RADIATOR
1X SINGLE RADIATOR
2X PUMP
2X RES
ANY IDEA OR WHO CAN HELP ME ON THIS PLZ DROP A LINE THANK YOU GUYS



WILL UPLOAD MORE PICTURE OF THIS RACK

this shall need alot of effort & idea dude
Y never consider chieftec dragon casing, it also full tower but its kinda affordable..

ps: if u still wanna do the mods, perhaps googling alot might help u to get the ideas

kekeeke

just dont like its layout need something like LL or SS

will try something out of this rack or bro ianho can help??

huhuu.. chieftec design not that ugly what.. anyway, still depend on ppl POV aite?
if u gonna still with ur mods, then go ahead. i wish u g0od luck.. & dont forget to update every inch of ur worklog here.. im looking towards it

thanks a lot bro

yes will do upload the worklog if this going to be my project

still on drawing board trying to get something of this rack

its kind of a hard work if the rack is made of wood.Need lots of time and effort to cut if.But i think you'll be the first to mod a rack in this entire modding thread.

yupe...tis is challenging exp...
need to consider the air in n out coz
wood not good in tf heat

How about this,

1) Reservoir goes to the top rack (easier to bleed air), along with mobo & everything directly attached to it. Drill a (or several) large holes for cables to run through between the top and middle rack. Mobo connectors can either face front or back, depending how you prefer the cables to run.

2) PSU & drives go to 2nd rack. PSU will probably have to be screwed directly beneath the wooden piece holding the motherboard, or cables might not reach. Pump can probably be put here as well.

3) Blow holes for fans on the back panel on all racks with components. Radiators can be placed behind the rack, with the exhaust fans blowing into them, or at the empty bottom rack where there is cooler air.

4) Cover the front with glass or acrylic, will need gaps for ventilation intake. Acrylic will be easier to work with in this regard.

Actually your idea is a good one if you're running a phase change cooler, it can sit on the lowest rack. As it is, radiators don't really take up the whole bottom rack's space, you can put quite a bit of stuff there.

thanks for the idea bro ive done some drawing instead of using wood as a tray or platform for mobo etc thinking why not using acrylic to replace the board and let the wooden panel to hold them but thing is still cant any idea of to do bacak panel for output stuff








here early drawing ive made but still cant figure out hot to settle it kekekeekee
if u guys have any idea please support me im still new in modification

Looks ok but I think you should move the reservoir to the top. That way its a lot easier to bleed air, and air won't get into the loop though the reservoir cap.

SORRY
FOR NOW I WILL PUT THIS PROJECT ON HOLD OR MAYBE I WILL DO IT FOR INTEL PROJECT LATER

GOT ONE FULL TOWER STACKER IN HAND AND WILL DO SOMETHING OUT OF IT

LOl .... When r u gonna continue...... Mcm best plak.... Jom ar... Mod dat rack...

ko abis SPM jom kita sama sama jayakan kekekkekkee
sementara hold dulu sebab memang banyak kerja to do especially for the back panel

maybe after i purchase some tools then it start only have drill in hand hhahahahahaahhahahaa

SPM???? Still young.
Bro,nice sketch u got..hope it will be a reality.

yang spm budak atas
aku dah lama uput sijil spm hahhahhaahaha
will do surely

now plan to mod this stacker instead hahaahahhaa mengamuk bini aku WOIII baru beli dah nak dibedah

So,biler nak start new worklog nie bro???

lor yang ko nak g tau bini ko wat pe... diam2 sudeh

bro..i got some suggestion regarding the full tower casing...
hehehheh pm you..

aku tak gi tau tapi stacker tu yang menunjuk kan diri nye kekekkekeke besar kotak tv 29inch tu hahahhahahaa

anyway just bought dramel cap anak ayam pusing pusing kat kedai hardware desa pandan dapat lak set ni complete ada dua jenis

satu tak banyak sangat tool rm59 nego lagi kekekkekeke satu lagi penuh set dia rm150 je

tahan tak tahan tu tak tau la aku kekeekeekkkekee

camne nak start ni aaaa baru nak pegang pembaris je ada je keja lain datang besak laaaa dah bapak org family 1st pc 2nd

fuh~~

interesting 'Casing' there~

already started the project haaa?

wanna c! wanna!