ok here i just wanna to ask you something about loosing the ram timing..erm i got a bit limitation during my ocing project which is my VDIMM voltage.The highest i can set is 1.95V . in amd system, by lowering the multiplier it will automatically oced your ram..now i am using the multiplier 12.5x141=3.012GHz at 860MHz.planning to reduce the multiplier to 12x 151=3.012GHz @1000MHz ..but after i set it into 12x 151=3.012GHz, my system won't boot.. due to the limitation by the ram.when i refer to this thread.suppose the corsair DHX C5 have capability to achieve >1000MHz easily with 2.1volt VDimm..Since i cant increase my vdim, the only option i prefer rite now is loosing my timing.Hope sifu or gurus out there can tech me the correct way to lost my timing by using memset..here my rig details

AMD 5000X2+G2 @ 3.012GHz
Asus M2N-E(limittation in Vdim )
Corsair DHX C5 6400@ 860MHz @1.95V|
5-5-5-15-23-2T(my question how to loose this ram timing ???..can give me example on loosing the timing)

here also i attached my ocing details: