QUOTE(ezinger @ Feb 12 2008, 12:21 AM)
i don't think your NB is undervolted unless your FSB is 500 and since your on a dfi mobo, it should be alright. but if your system crashes, what you could do at most is just increse the NB to +0.1
comment on NB.. tsk tsk tsk
» Click to show Spoiler - click again to hide... «
hint NB stock voltages and how much u can clock depends on straps .. best way to see them is to see the proc fsb they support native..
so dont compare with p35 which supports 1333mhz native and asus x38 that supports 1600fsb native..
x38 asus does 1600 fsb at 1.5v pll , 1.25v nb, 1.12 fsb vtt.. so dont compare..
1224 CL5 tRD 9 vs 1012 CL4 tRD 8 vs 1012 CL5 tRD 9» Click to show Spoiler - click again to hide... «
[attachmentid=396638][attachmentid=396644][attachmentid=396645]
more examples to come..
oh yeah warning.. plug and play ppl memset is a no no unless u want to kill ure NB and mem fast..
more yada yada yada
» Click to show Spoiler - click again to hide... «
newest danger of the year.. sceenshots by plug and play .. danger ppl danger i tell u..
cause plug and play would choose the last one..
when all of them are memtest86 stable at 2.24v
so only increase ure bandwidth when u have exhausted ure latency to the lowest.. and they ask ureself.. hey my rams still has a lot of vdimm to spare.. so shall i up the bandwidth and keep the same latency.. yes sir re..
PS thats the lowest trd for each of those settings.. cant go lower than that on this board.. all same NB voltage.
up elite carefull of plug and play.. dangerous dude..
y i say ure nb is undervolted..
if u say 3dmark etc is okay .. then u have some stability on ure core.. hence orthos etc would have given u rounding error
bsod.. means ure nb...
if mem seriously undervolted u couldnt have run those programs
if mem was a bit undervolted u would have gotten rounding error also
so hence NB ..
for fsb voltage.. hell u can boot in. so it works
but whether its the optimum no idea.. cause u need to find the optimum then u can reduce ure nb voltage.
lessson of the day.. becareful of reviews when ppl already said in it its stupid..
just incase u didnt notice the winner is the 1224 CL5.. not 1:1.. for this case.. but not advisable to run at that too long cause its approaching my mobo mem limits..
here is one more
Bus 400 : 800 CL3 trd 6 vs 960 CL4 tRD 6a bit more yada yada yada.
» Click to show Spoiler - click again to hide... «
geeee guess whose the macho man.. for 1000CL4 ,1066 CL4,1200 CL5.. i would have to burn me rams.. to get those stable at the lowest trd..
so when u hear ppl go yippe my ram can do this and that.. check how loose the trd settings are must be 10 or something..
oh yeah the bus 400 mem 1000 CL4 trd 5 = bus 500 1:1 1000 CL4 trd 7/8.. but vdimm a lot more for bus 400.
y?? 1:1 the real reason.. u dont stress ure rams that much on vdimm. and its okay to run at the lowest trd..
[attachmentid=396660][attachmentid=396661]
so watch out ppl .. plug and play screenshot.. dangerous i tell u.. next thing u know u will be the shops buying that same ram.. plugging into a different board.. and going uiks.. i cannot do leh..
so now u know.. cheaper mobo .. most of them cannot change trd.. so no idea what ure going to get..
secret of the ancients
» Click to show Spoiler - click again to hide... «
PS the is the secret to get a heck of a lot of aquamark score.. as its based on latency and bandwidth.
oh yeah incase the Dumbass that argued yesterday read this... low latency , high bandwidth .. is good.. DA..[I]
also proves that ddr2 overclocking guide is DEAD wrong..
cause it depends..
This post has been edited by cstkl1: Feb 12 2008, 02:29 AM 
Feb 11 2008, 06:42 PM
Quote
0.0204sec
0.76
7 queries
GZIP Disabled