hi alll , just bought E8400 this afternoon

my batch is Q746A474, Running at 4.4Ghz at 1.45V , stable orthos running 3 hours and 30 minutes de still counting

3Dmarks 06

lol ya i bought it from ALL IT lowyat this afternoon it was priced at Rm740 i nego nego then they give me RM730 discount Rm10

yeeerrr not good something bad happen playing games CoD4 , Crysis after 30 minutes got error pop up
issit my MCH and FSB voltage pump not enuf ?
my mobo Gigabyte P35-DS3P Rev 1.0 F9 bios
currently MCB is 0.20 V
FSB is 0.20 V

issit not enuf ? pls gimme some suitable voltage for my MCB and FSB pls no idea wats is my stock MCB and FSB voltages

This post has been edited by Ezonizs: Feb 13 2008, 01:47 AM

Thx for advice~ i'm abit noob in pumping North bridge and Fsb voltage~
base on your advice so i should emphasize on the FSB voltage then only go to MCB aka north bridge voltage ?

so how much i should pump in and whats the max voltage i can pump ? coz i donno wats the stock V for both of them ~~ i scare i fry them

oh ya i did pop into HALTED , 1 error dedected at 4 hours and 13 minutes last nite in Orthos blend

This post has been edited by Ezonizs: Feb 13 2008, 11:26 AM

LOL we have fall into intel's Genie pig trap woot

back to 4.2Ghz 467 X9
increase MCB to 0.275 V
increase FSB to 0.25 V
ram back to 1:1
testing orthos now seee can anot ~~hope no error pop up

lol i pump v core to 1.468V
orthos blend ~~ coretemp Core 0 71C , Core 1 71 C

@Vtec(Rock)
1 hour orthos not enuf lol go for 4 hours

This post has been edited by Ezonizs: Feb 13 2008, 12:01 PM

sad 478 X 9 4.3Ghz error havent exceed 480 also 1.468 V



i think i shall stick with 4.2Ghz with 1.45V with Ocied 1121Mhz ram . still stable orthos 1hour 3 minutes and still counting~~ but lose out 200 marks in 3Dmarks 06





This post has been edited by Ezonizs: Feb 13 2008, 01:43 PM

YES !!!!! problem fixed back to 4.4Ghz again this time played crysis 1hour 15 minutes and CoD4 1 hour no hang or watever!!
i just Clear mobo Bios ~ set every back to defualt then set back to 4.4Ghz 489 X 9 with 1.45V
MCB increase 0.15V
FSb increase 0.10V
so far so goood

dont dare to push my mobo to 500 fsb scare gonna fried it

lol 1.41v for 4.4Ghz quiet good de. my need up to 1.4656V to get it stable

congratz

E8400 OC ownage sry