borrow from fren 2 EARTH to try .... much more improve bass more deep and got energy hhehe who can borrow me SUN n MOON


This post has been edited by abel: Oct 20 2008, 03:10 PM

where should i do with the white cable? where to attach it??


this is how i place my moon


This post has been edited by jerren: Oct 20 2008, 02:36 AM

is better connect to ground .... i take from RCA ground not casing or earth

i didn't mod my RCA connector, so which is is ground of the RCA connector??

and bro, how did u place ur opamp?u're not using Zero or wat?
mind to share?

my zero dont used already hheehe i modding my CD63 sound much more better than i go to zero
chua already get poison with my CD63 with EARTH but he say the sound abit slow just not dynamic enuf but i like it just different ppl different taste

the gound is located at the bottom u just take out the board and solder 1 wire out i found when not ground it the sound abit blur (MCC aka mong cha cha)

if i not mistaken check the image below maybe u can double confirm with chua


This post has been edited by abel: Oct 20 2008, 03:20 AM

then hv to wait chua on9 n read it..

Well, just some poisoning, a brand new design from Audio_GD, to be precise, it's an USB to COAXIAL board, all input signal will be reclock and jitter will be as low as 20PS! Emmm ... the possibility of getting jitter free PC based music setup is getting near

Hi steve,

Audio gd says that will take some time until next year.

Marantz 63 or 63 KI has different sound signature towards warm and accuracy. Bass is low but not controlled and dynamics not as good, that's what marantz is famous for. However if the Marantz were to modded with 20 ps clock, the bass and dynamics department would improvement.

hi chua, is this the ground for zero's RCA?

yeah. that's right. the wire in the photo is too short. there is no need to dismantle anything to solder the wire.

Without the earth cable, the vocal will sound muddle. it is critical to connect the earth. lol.

This post has been edited by ccschua: Oct 20 2008, 07:42 PM

it's there any other ground in zero that i can connect the white wire??


This post has been edited by jerren: Oct 20 2008, 08:07 PM

hehehe ccschua maybe my fren wanna order all the 3 opamp hahahah

OPA Earth where got cap one. how come, who put in the cap.

perhaps another bulk. I want 1 unit of OPA Sun V2.

---

Added on October 20, 2008, 9:23 pmSeriously I dont see the clock. I guess it must be a separate board.
Just check further, this is a custom made DSP chip.


This post has been edited by ccschua: Oct 20 2008, 09:23 PM

can i connect the white calbe at the moon to the ground of the power cord socket there??

thanks


This post has been edited by jerren: Oct 21 2008, 03:47 PM

nope that is earth point not ground

This post has been edited by abel: Oct 22 2008, 12:11 AM

Hi abel,

audio-gd says if u add the new power supply +15V +5V , new audio-gd clock, and any times it is better than original Marantz CD17.

[of course u already bypass HDAM]

heard u are buying OPA. why not wait for bulk from steve

can i solder a cable along this part since it connected to the rca ground..

yes u can. the middle leg is the ground pin.

yeah actually my fren want it he want 2 x moon , 2 x sun , 2 x earth and i want clock steve ada discount or not ah heheheh

Seem like you all got new toys now......

This post has been edited by eddylws: Oct 22 2008, 04:34 PM