Yup, is my core temp Thanks bro

Dapat ddr900 pakai default vdimm ke? Aku dapat ddr800 je

Bro, which blue ice model did u use? Yup mine is oso hot Current just stick one 40mm fan using double side tape to reduce the heat , still looking for suitable one

edit = typo

This post has been edited by za_az: Jan 28 2008, 07:14 PM

Looks like our solution is kinda same here My fan oso from that model

I just unsrew the fan then stick it to the heatsink

Anyway, try to boot at 277fsb and it failed Does this mean i have to start pump some vcore & vdimm? Try to add vdimm and still fail, does this mean i need to add vcore or adjust timing? Any suggestion?

Fail to load at 277fsb by lowering my ram divider Add some vcore & vdimm oso fail.. How much should i pump them?

Current is 272fsb at both default vcore & vdimm using 667 divider.. Manage to load windows but fail SuperPi Do i need to pump vdimm or timing now?

Added vdimm at 2.05 & 2.15 both manage to pass 1M SuperPi but fail 32M one Trying 2.2v next

---

Added on January 28, 2008, 8:44 pm2.2v is even better, failed both test Any suggestion anyone?

This post has been edited by za_az: Jan 28 2008, 08:44 PM

Dun really know Maybe i should consider vcore?

Not yet Ok, i'll give it a try

Tried and failed to boot

Bro, for 7050 keep it below 1000?

Ok bro, i'll keep that in mind

Mine stuck at 2.4Ghz working while 2.45Ghz ended only pass SuperPi 1M while fail 32M .. Need to find solution later

SS for current best result Still wif default vcore & vdimm.. Hope can improve later

You mean Vcore & using stock heatsink? Then its good news for me BTW there is one option on the bios i can't understand mind telling me the 'NPT Fid' function?

This post has been edited by za_az: Jan 29 2008, 01:09 AM

Really, then that answer why i dun find any multiplier option for my proc Thanks bro

Good news for ta770 user then...

Update:

Last time the command rate is my probs (set it to 1T ) Just now manage to reach 2.5Ghz today (adding vcore & vdimm ), yet to test its stability Will update later...

This post has been edited by za_az: Jan 29 2008, 03:28 PM

Here [Not so impressive coz use really loose timing & 533 ram divider ]



Still wondering whether i should get heatspreader for my ram

Latest result Dunno should push higher or not Core temp at full load 54-58 Is the Vcore too high? And Vdimm set at 2.2V...

Thanks bro, looks like i need to find a good cooling then..

Sorry bro, just used to it Anyway here another result after i manage to oc to 2.6 and using 667 divider


Attached thumbnail(s)