@bro pws..
can u achieve 3.4 wif 1.45 vcore?can at least pass super pi 1m or not?

bro pws..u will probably failed wif that vcore?owh..coz mine can achieve 3.42ghz wif 1.45vcore super pi 1m and 32m pass

Well im using NTFS. What happened was my HD made clicking sound after the HT link is higher than 1100 and everything crushed and need to format balik. I wasnt suspecting the HT link jugak coz i've seen your result b4 using HIGH HT link but nothin happened. Maybe my HD too old kot, cant tahan the level of OC i was putting. But to be safe, i alwez set Ht link below 1000Mhz, malas nk beli new HD for the time being huhu 

Why got 3ghz and 4ghz ? Which one ? And hoho, joining the darkside u have.

wah... u guys serious ar? dun scare me leh... 

lets see... 

Bro, i think my name should be at Orleans instead of Manila


Last best result

AMD Athlon64 3000+ Orleans F2 @ 2295Mhz | za_az | Biostar TF7050-M2 | Kingston Value | 655Mhz | 4-4-4-12-17 | Stock Cooler

not much of a change in CPU temp. on idle sometimes it hits 29C but usually around 32-33C. both GeminII fan is using AllnGap's Delta maybe i need to work on exhaust

wish to try to OC it kaw2, but takut burn my psu like mizivincible did

bro -pWs-,answering behalf of afosz, the windblow/air pressure for afosz's Delta is similar to Vizo Windstorm but the noise is much much lower, not dead silence but acceptable. If you are using closed casing then the noise isnt audible or noticeable. Maybe U just know that your pc is running but it wont disturb your peace 

the noise ah, if you're staying in a room with a/c and complete silence, for sure you will hear it but it is an ok noise, not like "ah dem buzzing noise, gotta change fan". with a ceiling fan in a room, i barely hear the sound either. just like mizi said, airflow like vizo windstorm but the noise is much much lower

NEED HELP !

Anyone experience proc dies on them ?

Story : Yesterday after lapping my proc and hsf, I assembled back my rig. And it starts, but couldnt boot. Means all the fans are running but nothing appeared on the screen. Is this because of dead proc ? Or another technical issue that can be solved ? Tried lotsa thing right now but still. Gosh, tolong tolong =(

Today will check UTP post office to see whether my proc dah arrive ke blom. Have been dissappointed with the seller aoinatsume. Didt repl my msg at all. He told me to pm me the tracking number pon he didnt. Wanted to call him but no credit plak.

Nevertheless, hope the proc will arrive to day tho.

kingston?? how far can push??

Tempting, how much issit ? What chipset it uses  ? Im thinking to let go my 2 sticks of KVR 1gb tho.

@-pWs-
time to change

daRKSIDE~~~

set all refresh cycle value to the same value to be safe