coz the rams cannot do the same perhaps?


try running a lower divider or increasing tRFC for the rams to say, 192ns or so

what do you mean by lower divider?

hmm the OCZ Gold DDR2 -800 CL5 rated at 2.1/2.2v dude.. what can u expect..

why dont you put some voltage on the Vdimm, maybe it can help. Like what cstkl1 said, probably u wuld have to put the Vdimm at 2.1/2.2 V.

i think the default vcore range from 1.25-1.3 of the brisbane depends on the motherboard used perhaps.

my vcore reading in everest ult. is same as the cpu-z reading too so i guess it should be correct.

so far been running orthos for 14 hours so i guess its safe to say that my OC is stable izzit?

my ss

---

Added on February 10, 2008, 6:34 pmbtw, the oc results on page 1 are updated every version izzit? if so, ill try to get a nicer OC before this thread ends =D

This post has been edited by awh85: Feb 10 2008, 06:34 PM

the OCZ ram probably needs more vdimm....i used it before..it suxx in oc

just got my "not for sale" f2, kinda dissapointed, even worse than my previous x2 3600...

currently runnin it @ 2.5GHz w 1.4v...



This post has been edited by ah_khoo: Feb 10 2008, 09:12 PM

New mobo and new psu....
hehhee im back with new result later on

need to learn from TA690g sifu in here

Any good cooler that I can use? I run Orthos for 5 minutes and the temperature shoots up to 57C at 2.4GHz 1.375V (at BIOS, actual 1.432V). Currently run at stock speed, 1.175V BIOS actual 1.21V, load temperature after 45min Orthos only 45C

bro...feel sorry for your DFI and congrats on the new Biostar mobo
Waiting for your new higher OC results....

its F2 la...2.5ghz is good already...

what cooler u use now?? maybe u can try xigmatek?? i'm using freezer 64 pro. normal la, add more Vcore, temp also arise...
my 3800+ F2 at 2.4ghz need 1.325v for Vcore, orthos 1 hour the temp around 50'c and the fan speed around 1700rpm.
at 2.8ghz Vcore need 1.57v and the temp after 2 hours orthos around 60-65'c fan speed 2000+rpm...

last time tried to undervolt my proc to 1.21v for vcore, the temp around 45'c orthos 30min failed.. :lol:but i set the fan speed at 900rpm, super silent...

looking forward to see your ram unleash the true power

Thinking to buy and go back for AMD 5000 BE, have anyone use or seen AX78.
Thinking to go for X2 5000BE OC3.2Ghz, AX78/TA770+ and 3870x2.
After testing penryn, I am still a AMD Fanboy.
Looks very promision board.

how much is the board?
it looks promising

bro, from where you judge this mobo promising huh?
look quite plain leh

Heatpipe, mostfet heatsink, japan solid capacitor and crossfire.
Plain to the naked eye but not AMD OC'er like us. Hehehe.

hi guys, can i know what are the requirements to join the brisby 3600+ 3GHz club? how many hours of orthos or what other programs must i run stability to be considered a successful OC, despite not being stable enough for normal usage. got it to 3GHz now but failed orthos in 1+minute lolz.

---

Added on February 11, 2008, 12:53 ambtw, any tips for getting a stable OC around 3GHz?

This post has been edited by awh85: Feb 11 2008, 12:53 AM

hi there,
Super Pi 32M passed or Orthos 1hr passed will do
Passed results will be updated into database
btw, mind to show a SS of your 3GHz oc?
coz people can catch up your situation easily with a proper SS
CPU-Z general+ memory tab

ok, i show my cpu-z first



btw, if my pc reboot a few seconds after starting super pi 32m what does that indicate? i duno so i just keep trying pumping vcore or any other voltages i can find =.=''

Nice result there bro.