currenty use divider 400  oc to 3025 mhz 
i change diveder to 400 .or 533 or 667 and pump the vcore to  1.475 or 1.5 oso same

Loosen MAL and Trfc =   
izzit ram timing???  
maybe i nid to relax for few day and think bout wat else nid to do
blur blur 2 night liao   
or maybe nid more power PSU...curently my PSU real watt is 480W

can la 
Did you change the stabilizer and try again before? 

But it's kinda waste changing from 533 to 400 hehe.

I know bro -pWs-, since your angpow so much,it's time to change your mobo and proc, perhaps to BE and sell that F3 to me =P

But what dyu mean by divider problem ? Cant use certain divider to oc ke ?

Was it because of the ram ? What could cause the problem actually ? How about if just use your 10th ann and 533 divider, still same ? Is this problem occured to your mobo only or other DFI UltraII-m2 as well ?

my rig..normal only lor...no $ upgrade liao la...need casing and hsf then the end of buying things liao....
need to save money for ICE..not DI or iced watercooling this time =D

No lah.Want to keep it until next ten years,so it will be 20th anni.
Oh ya, i don't plan use 4GB at one time,its just a back up as i am afraid my ram faulty after oc,then have to be sent over for RMA.so,thats why i get extra.

I also don't know whether my rams is as good as PWS 10th anni or not.

No lah bro,to be honest,your 10th anni is way better than my previous ballistix.I cant run 1200mhz with lower vdimm.

ive tried bro..but still cannot..b4 i use 2.2vdimm to gain ddr1200,now even wif 2.4vdimm at xixo's rig also cant..max out at ddr1160

yup..the very same

Thats like a ram problem.Correct me if i am wrong.
I use 2.3v with loose timing failed.Then i tried 2.5v loose/tight timing also failed.
But its ok,my ballistix are sold now.Now having my 10th anni.Hoping it will run stable at 3.208Ghz with 641.6Mhz (5-5-5-7-11-2T)

yup..but till now cant find the real culprit

I will try to run 2.5v or higher next time because i am using it for 24/7.
All right.Thank you bro.I will update you again if still fail.

ur rig also got culprit ar?

try to change the ram slot position

3.1G at which Vcore bro?
my rig is running 3.0G , DDR2@1000MHz stable at default Vcore (1.3V) and CnQ enable 
but haven't try 3.1G yet....

bro PWS, at 3.1G can do CnQ?

waiting noobianz to test out his new arctic freezer 64...if not bad i might get 1...so, i shd find cm extreme power or real power 450w?

when the master said its the best..its the best..

dblooi..wanna test my ram?who knows that u can make my ram alive again