maybe hv to wait March or April ...me also wait..tak boleh tahan liaooo

FYI , B3 still weak in oc,
it just that TLB errata bug fixed , that's it
better don't hope too much

a heatpipe heatsink will be added to Biostar TA780G retail product

This is the pre-released version that we've seen before


This is how's the retail product looks




oc result , 420HTT achieved with air cooling


However, other than the heatpipe , the rest remain the same
1) Debug LEDs , Power and reset onboard buttons removed
2) HDMI output removed
3) Using Realtek ALC662 instead of using Realtek ALC88X ( TA690G is using Realtek ALC888 )

edited: Not sure the heatpipe version will be available in Malaysia or not.
TA690G also come along with MOS heatsink , but when come to malaysia the mos heatsink hilang

This post has been edited by dblooi: Feb 3 2008, 07:33 PM

make own mos heatsink la.. huhu.. waiting for DI


AMD
love to sharing

This post has been edited by xixo_12: Feb 3 2008, 07:44 PM

wow!low power in 45nm AMD?hope with bigger clock and cache..also bug free and overclockable

the bad thing about J&W RS780UVD-AM2+ is vdimm and vcore is low,only 1.45v for vcore and 2.15v for vdimm.

the TA770 A2+ bios setting.. if put V12 mode.. izzit will stable? the Auto OC, means the mobo will automatic push to the limit or wat le? or hav to adjust other setting to suit the Auto OC?

i now oc over 2.7g look like 2.86g will pass ORTHOS test

---

Added on February 4, 2008, 12:01 amif put V12 mode ..is mean only oc bout 25% to 30 %....but hv to see wat proc u use ..i think will not stable if the proc is fast 1(tis only will push the porc when loading)
is better use manual OC if u got a bit experince bout oc

This post has been edited by digswell: Feb 4 2008, 02:48 AM

har...
sounds like a downgrade rev of TA780G ler...
i wan the mobo lar...
cz wan try hybrid CF

i don't thing like that.un can push higher rather than Auto OC.

My full load core temp in Malacca.



-pWs-

that's really cool bro... wat's case ur on?

wish i have a decent case w me but my praetorian really too small for havin gud air ventilation, it looks more crowded after i forcefully put in d giant zeus psu (alot bigger than my previous fma)

off topic:

nice player u have there? is it a foobar?

Lowsy ICute casing.
Low temp is due to my hometown's weather here very cold.

OT: Yup... Foobar2000. I used people config to do it.

-pWs-

full load @ 38'C w/ 1.34v is simply impressive... with that kinda voltage i think mine is around 51/52'C...

ot: veli i-pod feelin d player...

Thanks
If you want the config, add me MSN.
I send you the config

-pWs-

@-pWs- @dj.eRicZzz
This my 1st oc post...like dj.eRicZzz say 4200+F2 is very hard to push it..i pump cpu Vcore-1.35v..HT-1.275v..Nb/sd(VVD)-1.170v and ram-2.0v

Proc-Amd 4200+F2
Mobo-Biostar TA 770 A2+
Ram-Team Elite DDR800 1gb x2 (5/5/5/16/19)
Hsf-Stock Amd X2 939 With heatpipe (allmost same with 6000+ stock hsf)




Need some advice and comment with tis OC resuft

This post has been edited by digswell: Feb 4 2008, 02:23 PM

Reach wall already???
If not, try pump some Vcore and push further.

I can see that your core temp near 55 already.
Still got a bit room to oc. Try it out

-pWs-

hehe is noon bro..very hot at my room now ...yesterday night i try at 2860mhz the cpu temp only at 42c

will try tonight again...maybe will pump a bit higher with some vcore and other thing

so how is the resuft ???very bad izzit

No la...Very good result already using F2 w that speed.
If can try higher, why not right?

-pWs-

Yalor....will try tonight but is still very hard to pust it beyond 3g