790FX

I think I wait ba... the price around 1k if I not wrong...

Btw, here's the pricelist in my hand lar.. dunno the updated ones..

Asus M3A - RM345
Biostar TA770 - RM355
MSI K9A2 - RM350
Gigabyte 770X DS3 - RM398

Turn out to be the most cheap is Asus...

I dun have problem while they detecting the peripherals.... but during booting windows... yeah, maybe around 20-30 sec waiting time...

i already email to support@biostar and they replied.
the support said i need to change the jumper setting on my IDE HDD to cable selection. the thing is i dun wan to use IDE in my current rig.

below is my rig. please advise any possible hardware that might cause the problem.

Windows XP Professional Edition SP2
AMD Athlon 64 X2 4400+ @2.88GHz
Cooler Master GeminII
Biostar T-Force TA770 A2+
OCZ Value DDR2 667 4x1GB
Leadtek Winfast 8600GT 256MB DDR3
Seagate Barracuda 10 7200RPM 160GB
BenQ DW1650 DVD Burner 16x Dual Layer 8x
Mushkin Enhanced HP-550 550W Modular

if the clock @ stock speed, same problem also will occur.

mine is windsor F2, ive tried alredy with low vcore like 1.25-1.35v but cannot stabil la ....

Kinda hoping for this to arrive in Malaysia but it's taking tooo long of a time to arrive:

An A770 mobo with CF supot

Keep to Higher Multi & Lower HTT.
No performance increase if you use higher HTT.

Correct me if I am wrong

-pWs-

Hey everyone, I'm back.

It seems that 3Ghz is unstable.

Both super PI and orthos failed.

Super PI could get to 16M but orthos would fail straight away?

Any ideas on which voltage to pump in more?

Would like to get 3Ghz stable.

Thanks.

@-pws-

My specs:
AMD 3800+ X2 F3 | @meno | Abit AN9 32x | Team Value Ram | 1044 | 5-5-5-15-21 | Thermalright IFX-14
@mzinvincible, wat mobo you running on?

Now my system doesnt boot. I dont know what's the problem.

Reset CMOS - failed.
Install only one stick of ram - failed.
Dissemble all hardwares and put it back - failed.
Install and uninstall processor - failed.

Now I dont know what to do. Both of the red LED on TA690G dont show anything.