The doll?



This post has been edited by Hyde`fK: Jan 23 2008, 02:18 AM

The MetStyle tissue is from the same supplier as Logitech, MCL. So shop selling Logitech would also sell the tissue I guess.

@vincentlaw

Those dolls have hands one.

I know a friend who is selling dolls locally, get them at very cheap price, all 4 for not more than RM150. Small surprise present for my GF. The biggest one is big enough for her to hug every night when she sleep.


Here's what I got today.

Another new HSF to play with after CoolerMaster Gemin II


Removed the push pin


This method is much more better than push pin. Thermalright LGA 775 bolt-thru kit I got last time, also used this on my Thermaltake BigTyphoon VX.


Finished installation





Somehow, the temp is same with my lapped BT VX on both idle and load. I expect it to be much cooler. Let the thermal paste sink for a few days and see got any improvement or not, else re-apply thermal paste.

This post has been edited by Hyde`fK: Jan 24 2008, 12:18 AM

I don't have a casing, so don't know how it will performs. I normally spread the thermal paste all over the IHS of proc evenly for maximum contact with HSF base, shouldn't be a problem. Wonder how much cooler it will be after lapped. Anyone have already lapped theirs?

I got the 2nd last unit, don't know who grab the last unit. My HSF just nicely touch the NB heatsink, no need to bent upwards, luckily. You may consider changing the NB heatsink.

My temp is idle 40c, full CPU load 63c [small test priming, not blend] @ 3.5Ghz 1.36v after full load in aircon room, naked system. Using AC MX-2. Still deciding whether to lap it or not since I find mine quite flat. Ordered TX-2, will reapply and test the temp again.

This post has been edited by Hyde`fK: Jan 24 2008, 12:54 AM

The fin just touch the NB heatsink without even have to bend upwards. Same case with my Blood Iron, also got the damn sticker. Will update you the temperature with TX-2.

We all get from ckhoong. Right now both S923 and S1283 are out of stock. You may have to wait for it. Better book earlier, many have place booking for new stock.

Difference is just the fan itself ler.

It's UltraSharp. It's under Small & Medium Business, not Home & Home Office.

http://www1.ap.dell.com/content/products/c...bsd1&l=en&s=bsd

It does looks cool, but performance wise, not that good compare to current one. Just for look I guess.

Actually wish to grab a Hyper 212 for testing but local distro don't have stock, end up with Gemin II and Xigmatek S1283. Hyper 212 performance are quite good too, just wish that I can test it out.

Why get two? Wanna see which one OC better?

Mostly we order from sellers here in Trade Zone.

CoolerMaster Alu Bezel and Tuniq TX-2

The bezel is for drive cover. No air flow, full solid alu.

Depends on the movie quality. Because of 22" higher dpi compared to 20", the pixel will appear bigger, not to mention you will notice the pixel if you sit close to it. Same case for 27" and 24".

New stuffs again.

Panasonic 16X SW-9588 SATA & DreamMedia 16X DVD-R 4.7GB 25pcs


The DVD Writer


With CoolerMaster Alu Bezel


Oh yeah!


Would be better if without the CoolerMaster logo I guess.

This post has been edited by Hyde`fK: Jan 28 2008, 11:41 PM

Haha yea, saw that post last time. Still wondering how to remove it. Can enlighten me?

Just received the fan yesterday afternoon from AllnGap. Then later COD Thermalright HR-03 and HR-05 with eXtreme(tm) at his house after off from my work.

How is Sabah's PC Image? Most people buy from them?