QUOTE(Malvine @ Jan 28 2008, 05:31 PM)
Viqq, you can ask the foreman to adjust the valve of the air con idle timing. Just said that the idle timing is too low when the air con compressor is on. Maybe you should ask several foremen to get second opinion.
FICD is a vacum valve that can stabilize the idle timing when the air con compressor is on. It will suck more air into the crankcase when the compressor is on, so the idle timing is stabilized. Just ask at the chop shop, I want a FICD that can stabilize the car idle timing when the air con compressor is on. But first, you can ask the foreman to adjust the valve of the air con idle timing for you. I hope this will help you. But sorry if I'm wrong.
eh not that it is low (R.P.M) at all times .. It is only low when i shift gear or something u know .. When i switch on the aircon, the idle R.P.M is still at 1000 R.P.M but then when sometimes i press the clutch to shift gear or something, the car like wanna shut down like tat.. FICD can get a first hand one kar? i don't want any second hand parts oh..FICD is a vacum valve that can stabilize the idle timing when the air con compressor is on. It will suck more air into the crankcase when the compressor is on, so the idle timing is stabilized. Just ask at the chop shop, I want a FICD that can stabilize the car idle timing when the air con compressor is on. But first, you can ask the foreman to adjust the valve of the air con idle timing for you. I hope this will help you. But sorry if I'm wrong.
QUOTE(terrysoh @ Jan 28 2008, 11:49 PM)
You described a lot of problems of your car after sevicing... maybe best solution is seek another new foreman service rather than going back to the old one which causes the problem
hmm.. but the thing is .. not much mechanic shop here in my hometown that has a computer to check the engine u know .. It'll be kinda hard to find one .. but i'll try ask later.. No more opinions or experiences already? One more thing, sometimes when I corner, break and put on the signal light, the chances of my car to shut down is very high.
Jan 30 2008, 07:20 PM

Quote
0.0165sec
0.63
5 queries
GZIP Disabled