is anyone using this casing?
help me how to make nice n cold inside
plz post your casing pic..

This post has been edited by sany1424: Jan 13 2008, 04:03 AM


Attached thumbnail(s)

errr... my bro did use the casing, but... u need nice airflow?
i dont have a picture but he put a fan beside it for cooling

Liquid Nitrogen....brrrrrrrrrrrrrrrrrr....

good airflow is all u need..if u need something more extreme..try using the phase change unit..thats cold

hurmmm...maybe u have to put more exhaust fan...or if u overclocking the system,i suggest u go for liquid cooling system...just giving my idea..

use those high flow rate fan..

Ahh ... I use black colour wan before

IF you're trying to cool dowm the interior part,and thats quite simple and easy.
All you need to do is to make an intake and exhaust.

1-You can put up to three intake fans on top IF you're planning to make your case to inverted BTX.Which means your power supply will go down at the bottom part of the case where it will not blocked the three fans on top.

2-You can put two intake fans on top IF you're planning to make a simple ATX where your power supply will stay on top BUT i will not blocked your fans space because you're using only two fans instead of three.

3-You can make a extra 120MM intake in front panel.

4-You can put a 120MM for exhaust at the rear parts where hot air will come out of the case.

5-You can also make a 2 X 120MM for exhaust at the bottom part of your case.

-Good luck-

how do u customize yours casing?
i need a pic of anyone who r using this casing....plzzzz

more fans, higher aiflows = higher the noise
u dun1 ur casing to sound like a generator rite? ^^

No customize la .. Just install 2x 80mm uv blue fans as rear exhaust and 1x 80mm uv blue fans at side panel intake.

go to i-cute thread...they have a thread about it, dont they?

http://forum.lowyat.net/index.php?showtopic=357685&hl=

Here is.

But too long no updates.

the casing comes with BIG fan infront and still no good airflow?

haha doesnt mean u got big front intake fan oredi gud airflow

this casing sucks...dirt will enter throught the big fan.

virginslayer. i suggest u look carefully. the intake should have a net. iCute wont be so stupid to let all the dust, mosquito, whatever get sucked n rot in the casing. it will be an enormous flaw. anyway i suggest u stop spamming in the threads.. if you are not spamming , then my bad.

i used the black one,
no hardest modify at all,
i just use cooler master fan at the back as a blowout and give it more light at night..

that's all i think, but i do see someone do the modify in this forum,
but i forgot which post is it...

used b4. front and side all intake then back ther exshaut lo. hmmm=)

Drill more holes for intake fans at sidepanel. else watercooling