(1) Luminus PhlatLight® SST-90 22mm 2250 Lumens Emitter (W65S WN F3)
- High Output – 1000 lumens (6500K at high efficiency) and up to 2250 lumens (6500K at high output)
- Large, single chip with an emitting surface area of 9.0 mm2
- High thermal conductivity package with a package thermal resistance of only 0.64 OC/W
- Lumen maintenance of greater than 70% after 60,000 hours
0 Variable drive current from less than 1 A to 9 A
- details here: [url=http://www.luminus.com/content1504 [/url]
RM150 1 unit



(2) Luminus PhlatLight® SST-50 20mm Star 1250 Lumens Emitter (W45S WJ P3)
- High Output – 550 lumens (6500K at high efficiency) or as much as 1250 lumens (6500K at high output)
- High thermal conductivity package with a package thermal resistance of only 2.57° C/W
- Lumen maintenance of greater than 70% after 60,000 hours
- Variable drive current from less than 1 A to 5 A
- details here: http://www.luminus.com/content1518
SOLD OUT



(3) CREE XLamp® XM-L2 LED 16mm Copper Base 1100 Lumens Emitter (U2 1A)
- Delivers 1100 lumens at 170 lumens per Watt
- Low thermal resistance: 2.5°C/W
- ANSI-compatible chromaticity bins
- Unlimited floor life at ≤ 30ºC/85% RH
- Reflow solderable - JEDEC J-STD-020C
- Electrically neutral thermal path
- details here: [url=http://www.cree.com/led-components/products/xlamp-leds-discrete/xlamp-xm-l2[/url]
RM36 1 unit
RM69 2 units



(4) CREE XLamp® XM-L LED 14mm Base 1100 Lumens Emitter (U2 1C)
- Delivers 1100 lumens at 170 lumens per Watt
- Low thermal resistance: 2.5°C/W
- ANSI-compatible chromaticity bins
- Unlimited floor life at ≤ 30ºC/85% RH
- Reflow solderable - JEDEC J-STD-020C
- Electrically neutral thermal path
- details here: http://www.cree.com/products/xlamp_xml.asp
RM26 1 unit
RM49 2 units



(5) CREE XLamp® XM-L LED 16mm Base 1100 Lumens Emitter (U2 1C)
- Delivers 1100 lumens at 170 lumens per Watt
- Low thermal resistance: 2.5°C/W
- ANSI-compatible chromaticity bins
- Unlimited floor life at ≤ 30ºC/85% RH
- Reflow solderable - JEDEC J-STD-020C
- Electrically neutral thermal path
- details here: http://www.cree.com/products/xlamp_xml.asp
RM26 1 unit



(6) CREE XLamp® XM-L LED 20mm Base 1100 Lumens Emitter (U2 1C)
- Delivers 1100 lumens at 170 lumens per Watt
- Low thermal resistance: 2.5°C/W
- ANSI-compatible chromaticity bins
- Unlimited floor life at ≤ 30ºC/85% RH
- Reflow solderable - JEDEC J-STD-020C
- Electrically neutral thermal path
- details here: http://www.cree.com/products/xlamp_xml.asp
SOLD OUT



(7) CREE XLamp® XP-G2 LED 14mm Base 583 Lumens Emitter (S3 1A)
- Delivers 583 lumens at 176 lumens per Watt
- Low thermal resistance: 2.5°C/W
- ANSI-compatible chromaticity bins
- Unlimited floor life at ≤ 30ºC/85% RH
- Reflow solderable - JEDEC J-STD-020C
- Electrically neutral thermal path
- details here: [url=http://www.cree.com/led-components/products/xlamp-leds-discrete/xlamp-xp-g2[/url]
RM26 1 unit
RM49 2 units


(8) Cree XLamp® XR-E LEDs 14mm base (R2 bin emitter)
- Cree Flux/Color BIN: R2 WC
- 3.7V typical driving voltage
- mini 14mm Star heatsink connection board for easy wiring and upgrading
- Manufacturer Rated 280 Lumens at 1000mA input current:
350mA: 114~122lm
1000mA: 280lm max
- Binning and Labeling Guide: click here
- datasheet - click here
RM16 per pc
RM29 2pcs



(9) Cree XLamp® XR-E LEDs (R2 bin emitter)
- Cree Flux/Color BIN: R2 WG
- 3.7V typical driving voltage
- standard 20mm Star heatsink connection board for easy wiring and upgrading
- Manufacturer Rated 280 Lumens at 1000mA input current:
350mA: 114~122lm
1000mA: 280lm max
- Binning and Labeling Guide: click here
- datasheet - click here
RM16 per pc
RM29 2pcs



(10) Cree XLamp® XR LEDs (Blue/Green/Amber)
- available color: blue/green/Amber
- standard 20mm Star heatsink connection board for easy wiring and upgrading
- Binning and Labeling Guide: click here
- datasheet - click here
RM20 per pc Blue & Green color left



(11) OSRAM Golden DRAGON Plus White Bare Emitter
- 3.7V typical driving voltage
- bare white LED emitter (please take note this emitter need a heatsink to function properly. do not operate it without a heatsink)
- details here: http://www.osram-os.com/osram_os/EN/Produc...Plus/index.html
http://catalog.osram-os.com/catalogue/cata...ct=showBookmark
SOLD OUT



(12) PHILIPS LUMILEDS Luxeon Rebel (0090 bin)
- part number: LXML-PWC1-0090
- minimum lumens: 90 @ 350mA
- typical lumens: 160 @ 700mA
- color: cool white (6500K)
- radiation pattern: Lambertian
- typical forwerd voltage Vf: 3.15V@350mA, 3.4V@700mA (max 1000mA)
- standard 20mm Star heatsink connection board for easy wiring and upgrading
- datasheet - click here
RM16 per pc
RM29 2pcs
RM46 3pcs



(13) PHILIPS LUMILEDS LUXEON K2
- Luxeon K2 LED emitter
- Typical driving current: 1000mA
- Driving voltage: 3.27~3.51V
- Color temperature: 6700K cool White
- radiation pattern: Lambertian
- standard 20mm Star heatsink connection board for easy wiring and upgrading
datasheet - click here
RM10 1pc




(14) 10Watt 9-Core Hi-Power LED
manufacturer rated specs:
- 10W true input/output
- Total 9-Dice in 3X3 serial/parallel configuration
- VF: 12V @ 1.0A
- Color temperature: 6500K White
- 9-Core (3 serial / 3 parellel)
- Requires to work with good heatsink
Dimension:
3 x 2.2 x 0.6 cm
Weight: 8.4gram
RM56 per pc




(15) 1Watt Infra-Red (IR) LED
- IR-850nm
- 1.5V @ 350 (1W)
- Works perfectly with night-vision equipments
- High output at 1.5V input
- standard 20mm Star heatsink connection board for easy wiring and upgrading
SOLD OUT



(16) 3Watt Infra-Red (IR) LED
- IR-850nm
- 1.3V @ 350mA (1W) 1.5V @ 700mA (3W) 1.7V @ 1A (5W overdriven)
- Works perfectly with night-vision equipments
- High output at 1.5V input
- standard 20mm Star heatsink connection board for easy wiring and upgrading
SOLD OUT



(17) 3Watt Ultra-Violet (UV) LED
- 410nm wavelength
- 3W output at 4.1V @ 700mA
- Work with more plastic/aluminum/lens reflector
- detect fake dollar bills, blood, fingerprints, trace, etc
- 3.6V @ 350mA (1W) 4.1V @ 700mA (3W)
- standard 20mm Star heatsink connection board for easy wiring and upgrading
RM30 per pc



(18) Thermal Glue 5g
- 5g net weight
SOLD OUT



(19) 63/37 Tin/Lead 0.4mm Solder Soldering Wire
Specifications:
- Alloy Composition : Sn63Pb37 (63% Tin, 37% Lead)
- Melting Point: 183°C / 361.4°F
- Diameter: 0.4mm
- Weight: About 50g
RM16 per unit
RM29 2 units



(20) Solder Paste (Hard Liquid Solder) 50g
- this item is actually a solder in hard liquid / paste form. just place some of it on both item to be soldered, place both item together, and heat it with your solder gun. very useful for smd soldering
SOLD OUT



(21) 300'C 10mm (width) X 33m (length) Kapton tape
RM10 1 unit
RM16 2 unit



(22)Digital Light / Lux Meter (200,000)
Features:
- New generic 200,000 Lux Digital LCD Pocket Light Meter Lux/FC Measure Tester
- High accuracy wide measuring range
- Automatic measuring level selection
- Maximum and Minimum measurement
- LUX/FC unit selection
- Data hold
- Data automatic recording
Specifications:
- Color:Black and Red
- Measuring Range:2000/20000/200000 Lux ;200/2000/20000 Fc
- Resolution:1 Lux/0.1FC
- Accuracy:± 4% ±10dgts(<10000Lux)
- ± 5% ±10dgts(>10000Lux)
- Repeatability:2 times/Second
- Measuring Level Selection:by Hand or Auto
- Power Supply: 2 Pieces AAA batteries (not included)
RM50 1 unit




All are brand new items. stock readilly available in hand. i'm located in kota kinabalu sabah. payment can be made to my maybank or CIMB account. item will be posted out with poslaju or pos daftar, depends on buyer's request. poslaju fees: to west/peninsula malaysia RM14, sarawak RM14, sabah RM8. pos daftar fees: RM6 whole malaysia. poslaju 1 to 3 working days delivery. pos daftar 4 to 7 working days delivery. both are safe, with tracking number provided and need receiver's signature.

to order, please send me your mailing name, full address with post-code, a valid telephone number, which item you want to buy, quantity of item, your shipping choice (pos daftar or poslaju). i'll send my bank details to you upon your order confirmation. payment can be made to my maybank or CIMB account through any online transfer, atm transfer, atm cash deposit, bank counter cash deposit, cash deposit machine, etc. kindly pm me the exact amount paid, as soon after you've made payment. item will be posted out as soon, after the fund is transfered. thanks in advance.

any question, please pm me directly.

This post has been edited by petunia: Apr 8 2022, 11:25 PM


Attached thumbnail(s)

what is this look for >

Free bump.....want to buy Q5

thanks for you continuous support.

Can i use those led for those china made 10w torch ?

bro do u sell only the circuit board?

how do i fix this to my torchlight?

these led so expensive,how can i use these led ?

These LEDs are very high-performance and reliable too, that's why they cost so much. Generally used by flashlight enthusiasts to improve the performance of their flashlights.

any chance to be cheaper?

Do you happen to sell the controller as well? These LEDs require a stable voltage that normal resistors can't cope.

actually, LEDs are current source device, so stable current supply is the critical issue here... most of these kind of 3W, 5W,10w LEDs should be partnered with proper drive electronics..

so yes, these LEDs need superior drive durrent control.. or else you will tend to overdrive them if just plugging into batteries+resistor control (which is Voltage source design)...
of coz, using Cree and branded type, the ability to sustain current overdrive is better than those non branded china types high power LED modules.. so I guess one could argue buying branded "US or japan" type has pseudo overcurrent protection built in..

Me too... I also want to buyer the controller as well.....

Bro,do you have these?I want white in color.Thanks.



Attached image(s)

do you have this? looking for this

Cree MCE Multichip Power LED
Manufacturer: Cree Lighting

---

Added on November 21, 2008, 5:26 pmlooking for driver also... do you carry it?

This post has been edited by hilk: Nov 21 2008, 05:26 PM

I an interested if this can be used to modify on cheap china branded torch..

got any R2 or Q5(warm-tint) LED on a 14mm mini connection board?
a Q3-5A might be an ideal choice for a warm tint i guess...


This post has been edited by makuyo: Mar 20 2009, 03:45 PM

may i know the K2 MPN. how many Watt?

---

Added on September 9, 2009, 1:54 pmstill got stock ?? i wamt k2 26pcs

This post has been edited by ericcyc8: Sep 9 2009, 01:54 PM

wanna buy 3Watt Infra-Red (IR) LED

This post has been edited by siowkeong: Oct 29 2009, 04:17 PM

bro... what is that? how to install?

Which one can be use with Fenix E20?

Sorry.. noob here

what are these??? where can how it can be used?? got pics?

hey bro, interested buying Seoul P4, are there any other color to choose? PM me ASAP

---

Added on April 19, 2011, 5:53 pmhelo? are this business still on?

This post has been edited by paulting: Apr 19 2011, 05:53 PM

hmmm, i'm also interested. are u still in business??

hello... this business is still running?

do you have any LED with 10w or 20w, color temperature 10000k or 12000k ?
Thanks.

Hai... this business still running?
interested with (4) CREE XLamp® XM-L LED 20mm Base 1000 Lumens Emitter (U2 1C)
and do you have the controller as well?

pm me best price

Hi,

do you still carry below item?

3Watt Ultra-Violet (UV) LED