Outline ·
[ Standard ] ·
Linear+
LYN Nvidia SLI Club, All SLI discussion here
|
guess1805
|
Nov 4 2008, 02:18 PM
|
Getting Started

|
Hello SLI experts!!!  I need some help here.. Thinking wanna try SLI here with my Galaxy 9800GT... Currently I'm using P5N-D mobo.. (  lame huh?) Well u noe this mobo, the distance between 2 pci-e slot are very near. Kinda afraid to buy a dual slot GC to SLI since the temperature might rise like hell. and fried up my GC.. Need some advice here on should I bought another Galaxy 9800GT or look for single slot GC like XFX/Leadtek 9800GT? Help me out SIFUs!!
|
|
|
|
|
|
guess1805
|
Nov 4 2008, 02:41 PM
|
Getting Started

|
QUOTE(hermit23 @ Nov 4 2008, 02:28 PM) wat is ur current gc temp? If its around 60-70 load, its should be ok to sli both. If ur so afraid, then just get a single slot. Currently a single Galaxy 9800GT only rise up to 64oC on load.. But I feared if I add up another Galaxy 9800GT at the lower slot, the upper one would not have enough room for air and the temp will rise up.. Anyone had this experience?
|
|
|
|
|
|
guess1805
|
Nov 4 2008, 03:12 PM
|
Getting Started

|
QUOTE(pyangaox @ Nov 4 2008, 02:48 PM) dun afraid bro coz it will go well with ur set up .... im using 9800gtx+ i makan 2 slot bro the gap is close but the temp is ok to me 60degrees.. still cn play games ... Really boss????  Finally, my worries are gone!  U r my hero  Hehehe.. Well, lets have a test then.. I'll update the news next week!  Added on November 4, 2008, 3:20 pmJust curious though.. Is there any vga cooler out there that only took a size of a single slot? This post has been edited by guess1805: Nov 4 2008, 03:20 PM
|
|
|
|
|
|
guess1805
|
Nov 4 2008, 05:34 PM
|
Getting Started

|
QUOTE(Aura @ Nov 4 2008, 04:33 PM) I agree with this.... Some ppl are insane enuf to put 3 together also no problem...... Added on November 4, 2008, 4:33 pmI think XFX one is single slot for 9800GT... U might wanna look it up.... Erm.. currently only 2 manufacturer came out with a single slot 9800GT XFX and Leadtek. Now kinda worried if SLI XFX with Galaxy might have a problem since Galaxy still using 65mm core.. Added on November 4, 2008, 5:36 pmQUOTE(hermit23 @ Nov 4 2008, 05:26 PM) go go and set up n post some pics n screenies here . . . a cooler which is single slot . . .  thermalright t-rad is single i think, but it costs a bomb. Besides that . . . ac, xigmatek . . . good coolers take up 2 slots. Wish me luck man!!  Trad is useless without the fan..  End up the same with the stock cooler.. Added on November 4, 2008, 5:38 pmAnyone knows bout Cooler Master Cool Viva Z1? Is it consume 2 slot? This post has been edited by guess1805: Nov 4 2008, 05:38 PM
|
|
|
|
|
|
guess1805
|
Nov 4 2008, 06:02 PM
|
Getting Started

|
Haha thanks man.. Just being cautions..  Added on November 4, 2008, 6:03 pmQUOTE(mADmAN @ Nov 4 2008, 05:59 PM) NOPE....... Zotac also has 9800GT single slots... i know coz im using the Zotac 9800GT Amp! which is a single slot... Oooo... I forgot to check on zotac.. This an OC ver rite? Does it use 65nm or 55nm core? This post has been edited by guess1805: Nov 4 2008, 06:03 PM
|
|
|
|
|
|
guess1805
|
Nov 4 2008, 08:38 PM
|
Getting Started

|
Hmm nice!!  Man.. now makes me confuse which GC I should take..  Definitely I cant take Zotac for SLI since it will drop to the reference speed of my Galaxy.. Mmmmmmm
|
|
|
|
|
|
guess1805
|
Nov 4 2008, 10:25 PM
|
Getting Started

|
QUOTE(RegentCid @ Nov 4 2008, 10:12 PM) Asus 9800GT also single slot mar Eh? Really?  I dun noe if there are other model..  If ASUS EN9800GT HybridPower Glacier HSF, it took up a size to 2 slot since the HSF is big I bought a set for my lil brother's rig This post has been edited by guess1805: Nov 4 2008, 10:26 PM
|
|
|
|
|
|
guess1805
|
Nov 5 2008, 08:59 AM
|
Getting Started

|
QUOTE(Aura @ Nov 5 2008, 12:34 AM) Ic ic.... If like that, in general, all 9800GTs are single slots if it is designed according to reference.... I guess I need to do some catching up.... My next purchase will be my next GTX 280....  Wai.. U are NOT CATCHING UP.. U ARE LEAVING ALL OF US BEHIND LIAO.... GTX 280 in SLI arr??  Added on November 5, 2008, 9:01 amQUOTE(RegentCid @ Nov 4 2008, 11:16 PM) It still can SLI even the Asus fans is bigger. But it still consider as single slot Oo.. might test itwith my lil bro's card first.. and c how it goes hehehe This post has been edited by guess1805: Nov 5 2008, 09:01 AM
|
|
|
|
|
|
guess1805
|
Nov 5 2008, 05:40 PM
|
Getting Started

|
QUOTE(Aura @ Nov 5 2008, 10:12 AM) LOL..... Where got leaving??? I've always wanted to try out this kinda configuration but din hav the chance.... If u ask me, i would say "I've always wanted to try out this kinda configuration but din hav the MONEY...." Hahahha This post has been edited by guess1805: Nov 5 2008, 05:42 PM
|
|
|
|
|
|
guess1805
|
Nov 8 2008, 07:31 PM
|
Getting Started

|
Just bought my XFX 9800gt today!!  Cant wait to try to SLI this card with my Galaxy  Added on November 8, 2008, 8:38 pmGuys help me out here.. Why my one of GC suddenly show the device stop working when I enable SLI? Is it incompatible? Both of it 65nm revision.. only the brand is different.. This post has been edited by guess1805: Nov 8 2008, 08:38 PM
|
|
|
|
|
|
guess1805
|
Nov 12 2008, 06:16 PM
|
Getting Started

|
GUYSS!!! HELP ME OUT!!  Why after I enable my SLI (2x XFX 9800GT).. There are no diffrence at all in FPS???? (tried with Farcry2, no differences and 3dmark06 , only increase 3++) WHYYY??? Feel wanna die already...
|
|
|
|
|
|
guess1805
|
Nov 12 2008, 07:24 PM
|
Getting Started

|
QUOTE(RegentCid @ Nov 12 2008, 06:22 PM) you must see far Cry 2 got SLi support or not? if no SLI support then SLI sure no wroks on that games lar. SLI in 3DMark06 / Any games only increase 30-40% only. What do you expect LOL.....BTW you try install newest driver from Nvidia or go Enable your SLI again and make sure SLI bridge is connected and PSU are good enough supply enough juice for 2 9800GT Arr?? Really?? 30%~40%?? So I supposed to gain atleast 2+++ since single card is around 10k.. SLI should be 13~14k rite? Now increase only 2++~3++ only! still stuck at 10k..  I dun now if FarCry2 support SLI or not.. but again Crysis also shows the same thing.. Even a lower FPS than single card!  Added on November 12, 2008, 7:28 pmQUOTE(pyangaox @ Nov 12 2008, 06:42 PM) yup already kena ..... disable then enable back ...then run 3dmark06 ...  Done it also.. also the same thing. I already use the latest driver 178.24.. I heard they are saying in net that 1280X1024 wont have any diff.. unless its a 1600X1200 and above.. is it true? This post has been edited by guess1805: Nov 12 2008, 07:28 PM
|
|
|
|
|
|
guess1805
|
Nov 12 2008, 11:42 PM
|
Getting Started

|
Wahhh really? Lucky you then  My PSU currently is Vantec ION2+ 600W.. True Power with 7+% efficiencies.. Is it not enough? Really weird here... Is it true only at high res we may c the diff? Currently just used the OC profile at BIOS setting (5%) .. Not brave enough to OC to a higher setting with only CM Sphere.. (a waste CPU cooler, luckily its free) Added on November 12, 2008, 11:47 pmQUOTE(cscheat @ Nov 12 2008, 11:24 PM) hey, for farcry 2, i saw a significant increase from 40fps (single card) to 60+fps (SLI) !!! Waa! wat is ur monitor size and wat resolution are u playin? This post has been edited by guess1805: Nov 12 2008, 11:47 PM
|
|
|
|
|
|
guess1805
|
Nov 13 2008, 09:00 PM
|
Getting Started

|
QUOTE(Mavrix @ Nov 13 2008, 12:11 AM) Ur PSU should do just fine... even u can OC the GC's also... I guess ur proc bottlenecking the system... In 3dmark06 did u leave the default settings? normally the default res is set to 1280x1024/no AA/no AF... Yeah I did and it just the only setting I can set since im using the trial version Ermm.... but I do notice some huge FPS increase during the "Canyon Flight" test. It goes up to 1++ fps when SLIed than single card which up to 5+ fps only.. but the others test show the same fps with single card..  Should I OC my proc to reach at least 3.0GHz? Erm.. might tried it but need to learn more about OCing first..
|
|
|
|
|
|
guess1805
|
Nov 13 2008, 11:10 PM
|
Getting Started

|
Yeah.. I did when I installed the game.. Kinda weird since only Canyon Flight had shown a increase of performance..
|
|
|
|
|
|
guess1805
|
Dec 1 2008, 11:22 PM
|
Getting Started

|
Oo?  I never knew X58 would b able to support SLI too.. I thought it only support CF. Haha Man Im so lost in this technology chase out..
|
|
|
|
|
|
guess1805
|
Dec 7 2008, 09:44 AM
|
Getting Started

|
Hi everyone!! Finally overcome my prob with the no fps or benchmark increase with my 9800GT SLI!  Based on Mavrix's suggestions before, I tried to OC my E8200 from 2.8GHz up to 3.2GHz. Not too stable but be able to complete my benchmark, and I got from only 10k up to 13k!!  Since Im too noob in OCing  .. So, just bought the e8500 and tried this proc with a single card, 3dmark06 shows 11k and with SLI I achieved up to 14k!! Later I'll post some screenies
|
|
|
|
|
|
guess1805
|
Dec 8 2008, 02:18 PM
|
Getting Started

|
QUOTE(RegentCid @ Dec 7 2008, 04:49 PM) 14k ok lu...my AMD Rig if SLi the 9600Gt also got 14k ...heh but 3dmark06 score cannnot depent so much ....high in 3dmark doen't mean high FPS in games Wahh!  Great lor!! 14k!!  Added on December 8, 2008, 2:24 pmQUOTE(Mavrix @ Dec 7 2008, 07:13 PM) Congrats bro!!! U got ur E8500 aa? hmm, i want oso but my motrbike just broke down and had to use the bajet for my bike.. well cannot get the proc for now.. D**N!! Just stick to my old E6600 for now.. Haha.. used up my saving lorr.. this months gonna eat maggi all the way This post has been edited by guess1805: Dec 8 2008, 02:24 PM
|
|
|
|
|