I have recently acquired a pair of 1GB Kingston DDR2-800, found to be ProMOS DDR2 2.5ns chips. We'll see how these cheapo chips fare in overclocking.

The rams... (I'll be testing only a pair)


Close up on the chips...


Although it's a bit hard to identify, by looking at the chips physically... the dimension is not very square There's a tiny brown dot on the bottom left corner, and the chip serial number starting with "S"...can't be a mistake with that serial numbering scheme. For those who do not know, ProMOS, albeit less popular with the overclockers, its chip has been used by some RAM manufacturers in high performance memory modules such as:

- Adata Vitesta PC2-6400 Extreme Edition 4-4-4-12@2.0V
- Adata Vitesta PC2-6400 Extreme Edition (EPP) 4-4-4-12@2.0V
- Corsair PC2-6400 Rev.2.1 4-4-4-12@2.1V
- Corsair PC2-6400C4D DOMINATOR Rev 2.1 & 2.2 4-4-4-12@2.1V
- Corsair PC2-6400C4PRO Rev 2.1 & 2.2
- G.Skill PC2-6400 PK 4-4-4-12@1.9~2.0V
- G.Skill PC2-6400 HK 4-4-3-5@2.0~2.1V
- Kingston PC2-8500 HyperX SLI-Ready
- Mushkin PC2-6400 HP2 4-5-4-11@2.1~2.2V
- OCZ PC2-6400 EL Platinum Rev 2.0 4-4-4-15@1.9~2.1V
- OCZ PC2-6400 Special Ops Edition Urban Elite 4-4-3-15@1.9~2.1V
- OCZ PC2-6400 FlexXLC CAS 4 4-4-4-15@2.0V
- OCZ PC2-6400 Reaper HPC Edition (2x1GB) 4-4-4-15@2.1V
- SuperTalent PC2-6400 4-4-3-8@2.2V
- Team Elite-series
- Team Xtreem Dark-series
- Team PC2-6400 Value RAM
- Transcend PC2-6400 JetRam/aXeRam

OK.... back to these cheap Kingston Value RAM...

Poorman's testing combo:
- AMD Athlon64 3200+
- Abit NF-M2 nView
- Coolermaster HyperTX
- Enermax FMA 460W

No ram cooling because no budget (poor mah!).

Too lazy to test with default voltage, so I straight go with 1.9V. No further tweaking done to the other memory timing settings.

1.9V: DDR2-950 CL5-5-5-15-2T


2.0V: DDR2-986 CL5-5-5-15-2T


2.1V: DDR2-1014 CL5-5-5-15-2T


2.2V: DDR2-1028 CL5-5-5-15-2T



...more testing coming

This post has been edited by soulfly: Jan 8 2008, 04:17 PM

nice...

the "S" code ur referring to is the batch code for the chip

btw, possible to take a pic of the front and back of the ram?

front and the back is the same i suppose

not all, some of them are different leh..

actually i was interested in what PCB it is using

so, would you please grant my request

.......... How bout Hynix chips???? da price r nearly da same I notice........

I don't have Hynix in my hand so no comment.

Just now I tried to push further but windows corrupted lol

Aiyaa.....

well hynix chips are dead now.. dun buy any hynix now.. the revisions that were good isnt produced anymore..

by the way soulfly bro, u should be able to do 1100-1120Mhz if its promos..it becomes unstable after tat. At 1150 it can run, but fail test. i hope u can.. and with the promos i have tried 5-5-5-12 2T on <1100.

---

Added on January 8, 2008, 10:05 pmpromos should be 6-layered bro.

This post has been edited by a1098113: Jan 8 2008, 10:05 PM

Huh.... Hynix chips r dead??? Waa...... dats wat i m using rite now......

promos is just chips... kingston can use whatever pcd they want.... 6-layer, 4 layer, 1 layer also can.

Not bad leh.Later try oc customer computer with hynix chip(Matching pair) see how.

@soulfly

take the pics la when u have the time... coz wanna see if its a brainpower 6-layer pcb or something else

waiting to release ur secret weapon soon eh

anyway to identify pcb how many layers......... naked eye cannot tell lar

some of the pcb got write pcb layer at the side

really nice clock @AMD system with value ram
if on intel system over ddr2 1100 might not a problems
mine 4x1gb kingston value with elpida chips ddr2 800 can do also
cl 4-5-5-15 @ddr2 1000 @2.2v on e2140@3.2g


This post has been edited by skydna: Jan 10 2008, 12:04 PM

I've checked the PCB, it's just normal Kingston PCB. There's no way Kingston would bother using 6-layer Brainpower PCB on their value ram.

I'm letting go this testing set, guarantee DDR2-1000 at rm160.

haha, nola, not so soon
results able to shock LYN community huh?

Can la, at the back there is a model code + brand

Awww
as i suspected.. 3 layer pcb's =__=

lol lol brian, suddenly i just remember that i have some of your "secret weapon" too xD

totally didnt remember to test it out with my new board. Should i toast it with 2.9v?

@bryan

bila mau release your darling rams la test test la bro, then tell us whether can do 1300 not

@aoi

would love to do that.. damn, 2.9V. how would that be, a beautiful fireworks display

This post has been edited by a1098113: Jan 16 2008, 09:38 PM