where is @meno?

wah..this mfcm tarak tidor kah..macam mesin 24/7 posting at lyn 

Hiho all. Thought I would toss up the steps I've followed for quite some time to pull my system back from the brinks of "--" and C1 system boot errors. I know it looks like a lot of hassel but it's better than having to go through RMA all the time which I know alot of you have done on the first instance of either error.

Anyway, here they are.

1. Shut down system and turn off PSU.
2. Press power button to discharge mobo
3. Jumper Clear CMOS jumper
4. Remove battery
5. Remove all memory
6. Let sit for 15-20min
7. Place 1 stick of mem in system in slot farthest from the CPU.
8. Replace Clear CMOS jumper.
9. Repace battery
10. Turn on PSU
11. Press power button. (if still getting "--" or 1d then "--" then shut down and reboot again. If still same then RMA)
12. If boot occurs (ie FF Led) then enter bios.
13. Load defaults, set date/time, set mem voltage to 2.1v
14. F10 save and reboot.
15. If boot occurs then enter bios, make all changes needed
16. F10 save and reboot.
17. If boot occurs (ie FF) then enter bios then shut system down via power switch
18. Place second stick of mem in second slot farthest from CPU.
19. Power on.
20. If boot occurs (ie FF) then hit reset to make sure.
21. If boot occurs then move on to allow windows to boot.

I have used these same steps countless times in my tinkerings where "--" and C1 has occured. Everytime I have come back from the dead.

Let me know if they work which I hope it does. If you find something else that works then by all means post that also.

Good luck and l8r.

Banyak duit hape, hang lagi banyak duit.
Bila nak bagi Duit Raya???!!!:drool:

Aku dah test mobo tu smalam, cpu fan connector tu elok.
Skarang cume tinggal ram slot nak cuba. Kalu OK means aloha, kalu x ok...

To all POC members Happy Aidilfitri...Minx maaf bnyk2 kalo ada salah dan silap..When@where for our next gathering???

next gathering must have ketupat.. hand made by tapirus..
@ @meno
ur F3 alone?? no board ha??

Hi guys, newbie here. Dont know where to ask, where can I buy acrylic in Bukit Mertajam? had been search for month already

bro aidiqin,

if u found do tell me where..i wana buy some also 

guys,

what new toys u guys playing?

Bro, u got your card d?
I just checked PC-Zone price list.
Gainward 3870 512mb selling for RM340 only.
Faster grab one.

Btw, i'll have a surprise announcement to make soon.
Hopefully can get support from all of you guys.
Stay tuned.

One more thing, overclockability is very subjective. I've seen an E82 which could do 4.0Ghz even when undervolted...
But frankly for RM350, it's not the best bargain i'd say. But if thats the only which fits your budget, then it might be a good upgrade from your last rig.

That looks like the perfect mobo for open bench use,
Look at those power and reset buttons and etc...

guys

building a rig for my sis

need some suggestion

e5200
p35/p45 mobo..which one?
4gb valueram
4670? 9600gt?
psu?

budget around 1.6 to 1.9K and she will be using 27inch lcd..no ocing

used for programming, watch movie, surf internut

Yea, very busy now.
Powerslide busy with AV shooting and directing...
Me busy with work...
Gaban busy tangkap kick waiting to go SWK.
Sonic busy and pening with all his work stuff also...

Btw Salim, how did you fit the Freezer 64 to your intel?

ok.ok.. good luck to ur all.

as for freezer 64..
i just remove tho old bracket for AMD ..
then i take one plastic stick drill 2 hole then use 2 screw to fix it to the mobo.. thats it..
no need to buy new cooler la since my E5200 cant OC higher than 260x12.5 ( suspect that MSI P45 mobo is the culprit)
even change some bios setting oso resulting blank screen..
just fed up oredi.. now stick at that speed.. temp oso just around 57 C max