Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
137 Pages « < 7 8 9 10 11 > » Bottom

Outline · [ Standard ] · Linear+

 Penang's Overclocker Club Official Thread V3

views
     
kmarc
post Jan 5 2008, 10:26 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak
QUOTE(gsan @ Jan 5 2008, 09:39 AM)
this mobo really got many OC option compare to DS3... have to spend time to tweak with it  whistling.gif
nvm, my father's rig put at my housetown  laugh.gif
I would recommend go for Tower 120... I bought this S1283 last time because I did not notice that there is another bulk selling Tower 120... If I know it, sure I will go for Tower 120  icon_rolleyes.gif

Added on January 5, 2008, 1:25 pmgsan: Intel C2D E6550 ( Conroe G0 ) : 3278MHz @ 1.38vcore : DFI LP DK P35-T2RS : 2x1gb Crucial 10th Anni ddr2 667 : 468 @ 4-4-4-12, 2.2vdimm : Xigmatek S1283

additional info:
this E6550 is based L726B batch, retail unit. and the ram is based D9GMH chipset. NB changed to NC-U6 and the S1283 installed at vertical position, original fan come with S1283 running at full speed, ~2100rpm

vcore reading:
bios set | bios reading | cpu-z reading (idle/load) | SG reading (idle/load)
1.38v | 1.38v | 1.376v/1.376v | 1.37v/1.37v  flex.gif

vdimm reading:
bios set | bios reading | SG reading (idle/load)
2.2v | 2.2v | 2.19v/2.17v  flex.gif


*
Nice mobo. Not much vdrop/vdroop at all. thumbup.gif

For my P35-DS3, bios set 1.425, orthos load cpuz vcore 1.360v sweat.gif sweat.gif

QUOTE(gsan @ Jan 5 2008, 09:01 PM)
I believe tower 120 is perform better than s1283... btw, it is at normal room temperature, no air-cond, side panel closed.

FYI, at first, I installed the s1283 horizontally because if at vertical position, it will crash with the NB heatsink. but the temperature damn high, 66~68'c during full load.
*
I'm using xigmatek S1283 too. You temperature is weird. How come so high?

For my E6750 using orthos (small FFT), at 3.5Ghz at 1.425v (bios), 1.36v (cpu-z load) - core temp 0.95.4 shows 59-60'c only...... hmm.gif

This post has been edited by kmarc: Jan 5 2008, 10:30 PM
gsan
post Jan 5 2008, 10:37 PM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(kmarc @ Jan 5 2008, 10:26 PM)
Nice mobo. Not much vdrop/vdroop at all.  thumbup.gif

For my P35-DS3, bios set 1.425, orthos load cpuz vcore 1.360v  sweat.gif  sweat.gif
I'm using xigmatek S1283 too. You temperature is weird. How come so high?

For my E6750 using orthos (small FFT), at 3.5Ghz at 1.425v (bios), 1.36v (cpu-z load) - core temp 0.95.4 shows 59-60'c only......  hmm.gif
*
yeah... the power of 4 phase digital PMW + 16 MOSFET flex.gif

your S1283 installed vertically or horizontally? now I change to vertically, temperature back to normal, 3.3GHz full load @ 54~56'c
kmarc
post Jan 5 2008, 10:41 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak
QUOTE(gsan @ Jan 5 2008, 10:37 PM)
yeah... the power of 4 phase digital PMW + 16 MOSFET  flex.gif 

your S1283 installed vertically or horizontally? now I change to vertically, temperature back to normal, 3.3GHz full load @ 54~56'c
*
Eh? How come so much difference at different orientation? My mobo is flat..... If it was in a casing, it would be vertical.....

Errrr... I thought vdroop was a safety feature?

Anyway, how many mosfet does the P35-DS3 have, BTW? hmm.gif ( I look at my mobo and seems like everything looks like a mosfet!!! laugh.gif )

This post has been edited by kmarc: Jan 5 2008, 10:43 PM
tapirus
post Jan 6 2008, 12:02 AM

(︶ε︶メ)╭∩╮ a�tE(R)isk
******
Senior Member
1,237 posts

Joined: Jul 2006
From: espie-prai
QUOTE(kevyeoh @ Jan 5 2008, 10:02 PM)
yo guys...
i didn't know there is such a thread for Penang folks... me also from penang... currently using QX6700 and OC to 3.2Ghz only...that's the best i can achieve so far...
hehe... next time got TT...do let me know...

will be great if can learn more tricks and tips to get better OC results...
*
welcome to the club bro rclxms.gif rclxms.gif rclxms.gif ..how u can find this thread??
danieljoey
post Jan 6 2008, 01:45 AM

ǝᴉqooN
******
Senior Member
1,284 posts

Joined: Oct 2007
From: 槟城 - Penang Island Status: Un-Owned
no reply from powerslide cry.gif cry.gif cry.gif
gsan
post Jan 6 2008, 02:51 AM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(danieljoey @ Jan 6 2008, 01:45 AM)
no reply from powerslide  cry.gif  cry.gif  cry.gif
*
bro, could you post a screenie of core temp for your E6600? smile.gif

This post has been edited by gsan: Jan 6 2008, 02:52 AM
cschun86
post Jan 6 2008, 09:32 AM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(gsan @ Jan 6 2008, 02:51 AM)
bro, could you post a screenie of core temp for your E6600?  smile.gif
*
why you need to know the core temp of the E6600??
gsan
post Jan 6 2008, 09:49 AM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(cschun86 @ Jan 6 2008, 09:32 AM)
why you need to know the core temp of the E6600??
*
the value of the VID brows.gif
cschun86
post Jan 6 2008, 10:52 AM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(gsan @ Jan 6 2008, 09:49 AM)
the value of the VID  brows.gif
*
Hami is VID?
mfcm
post Jan 6 2008, 10:58 AM

Look at all my stars!!
*******
Senior Member
2,765 posts

Joined: Nov 2005
From: **Hornbills**
QUOTE(gsan @ Jan 4 2008, 11:50 PM)
tested on P35-DS3, full load @ 3.3GHz, 54~56'c but today changed to DK P35 T2R-S, the heatsink installed at horizontal position because crash with the NB heatsink, full load 66~68'c  sweat.gif
cannot tell, secret  tongue.gif
visit your house better la, got many high end stuff  brows.gif
*
count me in when goin visit gsan,cschun house tongue.gif pay visit poc biggrin.gif btw gsan ur hsf crash with NB hsf coz it width or height?coz thinkin tuniq will face the same prob or not..erm btw the NB hsf standard rite?can fix with any 3rd party hsf rite?wat ur temp for NB with stock hsf n noctua?

@cschun
im goin to order few item from US..lemme me know if u interested brows.gif can share the shipping thumbup.gif
cschun86
post Jan 6 2008, 11:31 AM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
QUOTE(mfcm @ Jan 6 2008, 10:58 AM)
count me in when goin visit gsan,cschun house tongue.gif pay visit poc biggrin.gif btw gsan ur hsf crash with NB hsf coz it width or height?coz thinkin tuniq will face the same prob or not..erm btw the NB hsf standard rite?can fix with any 3rd party hsf rite?wat ur temp for NB with stock hsf n noctua?

@cschun
im goin to order few item from US..lemme me know if u interested brows.gif can share the shipping thumbup.gif
*
oh ooo?
pm me the detail,
and send me your msn too,
let see got anything tat hard to find in mas can get or not icon_idea.gif
gsan
post Jan 6 2008, 11:39 AM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(cschun86 @ Jan 6 2008, 10:52 AM)
Hami is VID?
*
as I said before during TT last time, nowadays Intel proc no longer produce the same VID a.k.a vcore for every same eg. E6750. last time all the proc eg. P4 2.4C have the same default vcore, but now, not every E6750 got the same vcore, eg. some is 1.325v, some is 1.350v. that's why on the box you'll see it label max 1.35v for the proc

QUOTE(mfcm @ Jan 6 2008, 10:58 AM)
count me in when goin visit gsan,cschun house tongue.gif pay visit poc biggrin.gif btw gsan ur hsf crash with NB hsf coz it width or height?coz thinkin tuniq will face the same prob or not..erm btw the NB hsf standard rite?can fix with any 3rd party hsf rite?wat ur temp for NB with stock hsf n noctua?

@cschun
im goin to order few item from US..lemme me know if u interested brows.gif can share the shipping thumbup.gif
*
the DK NB heatsink is a bit taller, that's why crash with S1283. but tower 120 is taller than the NB heatsink, I guess it wont have any problem during installation.
rainingzero
post Jan 6 2008, 11:47 AM

I miss my student life~
*******
Senior Member
2,497 posts

Joined: Jan 2006
From: Selangor
wah...so many new members arr? untill now still cannot find white CCFL here around penang. whoever know where can i get this ccfl??
gsan
post Jan 6 2008, 12:07 PM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(tapirus @ Jan 5 2008, 02:31 PM)
bro can provide me ur memset ss???
*
bro, here is the screenie, 476 @ 4-4-4-8 and still priming. actually there is a lot of dram tweaking option on DK P35, but I set the main timing only, the rest left with Auto.

btw, how's your new intel rig? brows.gif

user posted image
pokok86
post Jan 6 2008, 01:18 PM

Getting Started
**
Junior Member
235 posts

Joined: Jan 2007
From: Kedah----Penang
gsan borrow u my Tower 120 wan bo?
now still waiting my PSU, all alrdy stand by
after free come help me OC lol
next week still busy on lab, so siez

any1 got PSU to borrow me?
pls, will belanja u kopi lol
gsan
post Jan 6 2008, 01:26 PM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(pokok86 @ Jan 6 2008, 01:18 PM)
gsan borrow u my Tower 120 wan bo?
now still waiting my PSU, all alrdy stand by
after  free come help me OC lol
next week still busy on lab, so siez

any1 got PSU to borrow me?
pls, will belanja u kopi lol
*
haha... lazy to take off and install the heatsink already... but anyway, thanks ya smile.gif

tonight I got discussion @ 9pm, after finish it, will take the mobo for you.
kevyeoh
post Jan 6 2008, 01:54 PM

Look at all my stars!!
*******
Senior Member
4,714 posts

Joined: Jan 2003
i was at the main page of lowyat forum...and this thread was the most recent with reply...so it's shown on the main page lor...the thread...
smile.gif

QUOTE(tapirus @ Jan 6 2008, 12:02 AM)
welcome to the club bro rclxms.gif  rclxms.gif  rclxms.gif ..how u can find this thread??
*
mfcm
post Jan 6 2008, 02:18 PM

Look at all my stars!!
*******
Senior Member
2,765 posts

Joined: Nov 2005
From: **Hornbills**
QUOTE(gsan @ Jan 6 2008, 11:39 AM)
as I said before during TT last time, nowadays Intel proc no longer produce the same VID a.k.a vcore for every same  eg. E6750. last time all the proc eg. P4 2.4C have the same default vcore, but now, not every E6750 got the same vcore, eg. some is 1.325v, some is 1.350v. that's why on the box you'll see it label max 1.35v for the proc
the DK NB heatsink is a bit taller, that's why crash with S1283. but tower 120 is taller than the NB heatsink, I guess it wont have any problem during installation.
*
ic..yeah hope so..if not hard for me to make it ventrical since the the exhausted rear fan just near the proc..thinkin to change the NB hsf too..its standard rite?any 3rd part hsf can fix?
gsan
post Jan 6 2008, 02:47 PM

Electrical RF Engineer
*******
Senior Member
2,471 posts

Joined: Jan 2003
QUOTE(mfcm @ Jan 6 2008, 02:18 PM)
ic..yeah hope so..if not hard for me to make it ventrical since the the exhausted rear fan just near the proc..thinkin to change the NB hsf too..its standard rite?any 3rd part hsf can fix?
*
ya, it is standard, push-pull type.

user posted image
cschun86
post Jan 6 2008, 02:48 PM

Heading towards 2000~
******
Senior Member
1,972 posts

Joined: Oct 2006
From: Seberang Perai
user posted image


rclxub.gif rclxub.gif HELP~ rclxub.gif rclxub.gif

Weird thing happened I guess,
look at my ortos, state there 400mhz x 9,
while actually the setting is 400 x 8 only,
can prove through CPU-Z,
anyone know why this happened?
« Next Oldest · Price & Dealers Guide · Next Newest »
 

137 Pages « < 7 8 9 10 11 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0271sec    0.45    5 queries    GZIP Disabled
Time is now: 29th November 2025 - 02:40 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.