My mobo do not have a function for changing cpu multiplier.
Just using Auto OC from the bios and got 2.6Ghz max higher.

Do u never see people change their multiplier for OC ??
Offcourse i change my FSB.
Asking Thoroughbred and Barton.Now just asking for brisbane.

Yes...7050 m2 but i dont know why they put PV.u can see at this link.
http://www.biostar-usa.com/

hayya bro,relax..
not X2 4000+ Barton,im using brisbane,just asking if i can change the multiplier 4 my brisbane.
i mean barton for AMD Athlon XP,some pencil trick must to do to unlock the multiplier.
but that is long story.

auto oc : im just using setting has provided by biostar/manufacture.Could find in the bios.

yes bro,but it is for HTT,not 4 cpu

This post has been edited by -=ProtozuaqS=-: Jan 3 2008, 03:25 PM

o.k,i will upload soon

so how far u can go with that mobo?

My SS...

Default clock and after OC by using V12-Tech


tell me how far i can go..

This post has been edited by -=ProtozuaqS=-: Jan 9 2008, 03:44 PM


Attached thumbnail(s)

but i wonder why my rig cant boot after doing by manually,
let see..i have change fsb to 250,htt set to 4x,ram divider to 333.
but default vcore and ddr voltage.
the setting is not differ with auto setting,even change vcore up to +0.05 or +0.10,it still can't.

so,im just clear cmos and using auto OC.

how about TF7050?

i will try it,
yeah i know some matter is hard to explain,
like me before.

This post has been edited by -=ProtozuaqS=-: Jan 9 2008, 05:25 PM

my turn.....some other test from me.
need a comment from ur guys..



i will try to reach at 3.0ghz and post the result later.

This post has been edited by -=ProtozuaqS=-: Jan 17 2008, 09:04 AM

just increase +0.012v...
anyway,after 8h 32m SP2004 testing, i got the error,mybe should increase the vcore.

i'm changing ram divider from 533 to 667 but it not working,
my rig didn't save setting but it turn to the default clock after reboot.
do i need to change vdimn?

This post has been edited by -=ProtozuaqS=-: Jan 17 2008, 01:09 PM

8 hr just to measure how long it can keep stable,
so,what the vdimn shud i use?or just trying increment 1 by 1.(take much time )
some people said better to keep 533 rather than change to 667.

maybe crazy coz 9154 hour stress?or my eyes wrong?

Another test from me...2.9 G1 stable OC.


im need some comment bout RAM timing and higher safe vdimn to
push up my RAM.
i reckoned that Crossair value ram is not good enough for oc kaw kaw..

its so hard la bro,coz i oredi used CM alumn cooler,
so i dont want their double tape(realy?)got loose.
and also dont have camera

yeah,i believe it will hit 3.1+GHz (or more) stable.The only reason my OC hit a wall
at 2.9GHz is because of my RAM,however i would to try to hit >3.0ghz.

I using default vdimn,
so what will happen if xceed 60 degree ,
i dont think it will burn the proc.

Now,trying so hard to reach 3ghz,need to try to up NB voltage.
Urm,seen that OCCT is more accurate rather than Orthos for
stability test,if i want to use the OC setting for long hour.